2008 Chevrolet Corvette Performance and Racing Products
More 2008 Chevrolet Corvette Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 2008 Chevrolet Corvette, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 2008 Chevrolet Corvette Performance and Racing Products
Spectre – In Gasket Comp Sb Chev S (Part No.400)
from
$34.49
The K&N PreCharger® filter wrap is specially designed to extend the service interval of your K&N Filtercharger filter when used in very dusty conditions. They are made from durable polyester material containing a uniform weave. The PreCharger will stop small dirt particles with minimal restriction to the airflow of the filter.
Product Features:
See More
Product Features:
- Cellulose nitrile composition
- Silicone beading on both sides
- Create a leak proof seal
- Double beaded, includes EGR restrictor plate
Edelbrock – Intake Manifold Gasket for 1958-1986 Small-Block Chevy (Part No.7201)
from
$26.99Product Features:
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
MagnaFlow – Stainless Cat-Back System Performance Exhaust Kit for Chevrolet Corvette (Part No.15887)
from
$1661.99
If you’re in the market for a replacement exhaust or just want something that offers you a little more power over stock, then look no further than MagnaFlow for your aftermarket exhaust needs. Made of 100% stainless steel and then fully polished to give it that extra shine, our cat-back systems not only perform, but also look good in the process.
See More
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.16799)
from
$1111.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 16799 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16799 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
Energy Suspension – Control Arm Bushing Set (Part No.3.3177G)
from
$87.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3108R)
from
$102.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3145G)
from
$78.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3142G)
from
$118.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3145R)
from
$74.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Dynomax – Direct Fit Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.52382)
from
$168.99
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax products – engineered for “Pure Unadulterated Power” – include complete cat-back and axle-back performance exhaust systems; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax product has the benefits of worldwide global engineering resources. The DynoMax brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.
Product Features:
See More
Product Features:
- Dynomax clamp-on stainless steel exhaust tips are available in a variety of sizes making it easy for you to bolt on a custom look. Available in single or double-wall, high-grade 304 stainless steel construction
- Clamp on design
- 304 mirror polished stainless steel
- DynoMax embossed logo
- Available stainless steel or painted
Hypertech – Street Runner Power Computer Chip, Aluminum Head (Part No.156341)
from
$242.89
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.
Product Features:
See More
Product Features:
- Designed For Daily Street Driving
- For Unmodified Vehicles w/Stock Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Hypertech – Street Runner Power Chip (Part No.126041)
from
$242.89
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.
Product Features:
See More
Product Features:
- Designed For Daily Street Driving
- For Unmodified Vehicles w/Stock Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Hypertech – Street Runner Power Chip (Part No.156301)
from
$242.89
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.
Product Features:
See More
Product Features:
- Designed For Daily Street Driving
- For Unmodified Vehicles w/Stock Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
K&N – Cold Air Intake: Adds Up To 50 Horsepower, With Million Mile Air Filter (Part No.63-3090)
from
$699.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Million Mile Air Filter (Part No.63-3073)
from
$499.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
aFe POWER – Momentum Cold Air Intake: Gain up to 46 Horsepower! comes with both (Part No.52-74202-1)
from
$536.99
Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.
Product Features:
See More
Product Features:
- 25% Flow Increase
- Outflows Factory Intake By 25%
- Unique Filter-To-Housing Interface For Easy Installation
- Incl. Both Pro DRY S Oil Free and Pro 5R Oiled Filters
K&N – Cold Air Intake: Adds Up To 27 Horsepower, With Million Mile Air Filter (Part No.63-3060-1)
from
$499.99
The K&N AirCharger 63-3060-1 air intake system replaces your Chevrolet Corvette Z06’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Corvette Z06 engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-3060-1 air intake has a K&N high-flow air filter with a top and base made from light weight carbon fiber. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Million Mile Air Filter (Part No.57-3020)
from
$499.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.57-3052)
from
$499.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
MSD Ignition – Starter; GM LS1-LS7 Engines (Part No.5096)
from
$409.99
Our advanced power system line has grown to include starters. Our new APS starter is designed to crank over the highest compression engines on a hot day in Death Valley. Not that too many race cars are sitting in Death Valley, but it’s good to know that you have the oomph to make it happen. The APS starter features all new components beginning with a three horsepower motor. This power is used to crank over the reduced 4.4:1 gear set to deliver great torque to the engine’s ring gear to get the engine turning. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement and thousands of starts. The downsized housing clears most headers and oil pans, but just in case, we made the billet mount so it can be clocked in different positions to help in tight applications. The assembly is powder coated MSD red and will stay looking good, even though it’s underneath your car.
Product Features:
See More
Product Features:
- Mount Can Be Clocked To Assist In Mounting
- Downsized design helps clearance issues w/oil pans and exhaust
- Ball bearing supported armature and pinion gear
- 3 Hp Motor Provides Power For High Compression Engines
- Gear reduction of 4.4:1 improves torque for great cranking
- Downsized design helps clearance issues
- Mount can be clocked to assist in mounting
MagnaFlow – MagnaFlow Direct-Fit Exhaust Pipe – 15885 (Part No.15885)
from
$603.99
Upgraded front pipes for optimized performance.
Product Features:
See More
Product Features:
- Stainless steel construction
- Mandrel Bent Stainless Steel Tubing
- Made in USA
Dynomax – 53554 Exhaust Intermediate Pipe (Part No.53554)
from
$52.99
Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
Product Features:
See More
Product Features:
- Mandrel bends improve flow capacity over traditional bends
- Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
- Dynomax® premium pre-bent pipe is manufactured with precision benders, and then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
- Pipe diameters are increased from OEM sizes to improve flow and increase power
MagnaFlow – Performance Exhaust X-Pipe Assembly (Part No.15437)
from
$562.99
Upgraded front pipes for optimized performance.
Product Features:
See More
Product Features:
- Superior flow & performance
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
Dynomax – 53553 Exhaust Intermediate Pipe (Part No.53553)
from
$52.99
Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
Product Features:
See More
Product Features:
- Mandrel bends improve flow capacity over traditional bends
- Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
- Dynomax® premium pre-bent pipe is manufactured with precision benders, and then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
- Pipe diameters are increased from OEM sizes to improve flow and increase power
MagnaFlow – Exhaust Pipe Performance for Chevrolet Corvette, Outside Diameter – 2.5 in. (Part No.15484)
from
$330.99
Product Features:
See More
- Product might not be available in all states due to local laws.
Dynomax – X Pipe (Part No.56159)
from
$173.99
Dynomax® Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax® product is backed by engineers who know what you want and expect out of a performance exhaust product.
Product Features:
See More
Product Features:
- DynoMax® Universal ‘X-Pipes’ feature O.D. sized inlet and outlets allowing for easy fabrication of custom exhaust systems
- Mandrel bends improve flow capacity over traditional bends
- Combine state-of-the-art engineering with quality material to provide exceptional strength and durability
- Dynomax® premium pre-bent pipe is manufactured with precision benders, and then fixture checked, insuring every part is a perfect fit, providing quick and easy installation.
- Pipe diameters are increased from OEM sizes to improve flow and increase power
Popular 2008 Chevrolet Corvette Performance and Racing Products Categories
2008 Chevrolet Corvette Performance and Racing Products
You count on your 2008 Chevrolet Corvette to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 16 Performance and Racing Products ranging in price from $32.49 to $2,889.99, you’re sure to find everything you need for your 2008 Chevrolet Corvette.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 7 different brands like MSD Ignition, Energy Suspension, and Bully Dog. 2008 Chevrolet Corvette Performance and Racing Products start as low as $32.49!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 19 extensive product reviews on 2008 Chevrolet Corvette Performance and Racing Products.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2008 Chevrolet Corvette below to get started!
Top-Rated Performance and Racing Products Brands For Your 2008 Chevrolet Corvette
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2008 Chevrolet Corvette running right for years to come. In our inventory you’ll find brands like MSD Ignition, Energy Suspension, Bully Dog, and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Air Intake Kits. All are waiting to get your 2008 Chevrolet Corvette back on the road. Some of the top-rated K&N products in these categories are:
from
$499.99
(7)
Cold Air Intake: Adds Up To 18 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
from
$499.99
(6)
Cold Air Intake: Adds Up To 27 Horsepower, With Million Mile Air Filter
Performance Air Intake Kits
FAQs for 2008 Chevrolet Corvette Performance and Racing Products
What are the most purchased Performance and Racing Products for the 2008 Chevrolet Corvette?
Out of 16 Performance and Racing Products for the 2008 Chevrolet Corvette, the most popular in our inventory are:
from
$83.99
This product is not rated
Control Arm Bushing Set
Performance Upper Performance Control Arm Bushings
from
$87.99
This product is not rated
Control Arm Bushing Set
Performance Lower Control Arm Bushings
