from

$69.99

New Standard Replacement Radiator Center Support

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$41.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$11.49

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$173.74

ACDelco GM Original Equipment Engine Cooling Fan Blades are located between the radiator and engine and are GM-recommended replacements for your vehicle’s original components. The fan is a part of the engine cooling system, which moves air across the radiator and A/C condenser to remove heat from the engine cooling system and the AC refrigerant system. The fan may be belt-driven or operated by an electric motor. This cooling fan blade has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$283.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$8.72

An ACDelco GM Original Equipment Engine Coolant Water Inlet Seal is a GM-recommended replacement for your vehicle’s original component. It seals and helps prevent coolant from leaking out of cooling system components. This original equipment engine coolant water inlet seal has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Seals and helps prevent coolant from leaking out of cooling system components to maintain the proper engine temperature
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$89.99

This replacement engine coolant pipe assembly is designed to match the fit and function of the original assembly on specified makes, years and models, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this replacement engine coolant pipe assembly is designed to match the fit and function of the original assembly on specified makes, years and models
Restores functionality – reliable replacement for an original part that is leaking, cracked or failed from corrosion and heat
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$62.94

An ACDelco GM Original Equipment Engine Coolant Thermostat is a temperature controlled valve located in the engine coolant outlet to, or the inlet from, the radiator, and is a GM-recommended replacement for your vehicle’s original component. It controls the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature. This original equipment engine coolant thermostat has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Control the flow of coolant through the radiator to enable the engine to reach and maintain its normal operating temperature
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$17.99

ACDelco GM Original Equipment Engine Coolant Water Outlets are housings that connect the radiator hoses to the engine, typically housing the engine coolant thermostat. For certain applications, the water outlet contains threaded holes or ports for sensors and switches. These original equipment engine coolant water outlets are GM-recommended replacements for your vehicle’s original components and have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$38.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$336.39

Save time, money and labor with Dorman’s Engine Cooling Fan Assembly. It comes ready to install with the motor, shroud, and blade. Plus, the high fiberglass content offers extra strength and rigidity while improving thermal stability.

Product Features:

Optimal air flow prevents vehicle from overheating
Plug and Play jumper harnesses included (where applicable)
Direct replacement for a proper fit every time
All motors are tested prior to final packaging of fan assembly

from

$25.37

An ACDelco GM Original Equipment Expansion Tank Cap is a spring loaded cap that seals the radiator filler neck or surge tank, and is a GM-recommended replacement for your vehicle’s original component. It maintains pressure on the cooling system while the engine is operating, which raises the boiling point of the engine coolant. It also replenishes the system with coolant from the expansion tank (if equipped) when the engine cools off. This original equipment radiator cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Thermostats and Caps. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Thermostats and Caps are engineered for virtually every model of GM car, light duty truck, and sport utility vehicle.

Product Features:

Seal and maintain pressure on the cooling system for vehicle safety
Raise the boiling point of the engine coolant to maintain efficiency
Fit most models of GM vehicles for expanded coverage
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$99.99

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$391.20

ACDelco GM Original Equipment Engine Cooling Fan Motors supply power to the engine cooling fan so that it can move air across the radiator and A/C condenser, helping to cool the system. This original equipment engine cooling fan motor is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$39.99

New Platinum Pro Coolant Recovery Tank, With Cap

Product Features:

With Cap, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$93.99

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$10.76

ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda. ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and After sales, a division of General Motors.

from

$29.99

ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant. It is the fastener of choice.

Product Features:

Made From Black Oxide Finished 8740 Chrome Moly Or Corrosion Resistant Stainless Steel
Nominally Rated At 170,000 PSI Tensile Strength
Professional Quality Fasteners
Made In USA
Hex Head
Sold As A Kit

from

$33.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$216.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$20.99

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
100% leak tested
Direct-fit replacement for ease of installation

from

$9.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$14.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$16.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

2008 Chevrolet Avalanche Engine Cooling Parts

More 2008 Chevrolet Avalanche Engine Cooling Parts

Essential 2008 Chevrolet Avalanche Engine Cooling Parts

KAI – Radiator Support (Part No.GM1225262)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Engine Auxiliary Water Pump Connector (Part No.PTA1838)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

ACDelco – 15-80912 GM Original Equipment 7 Blade Drivers Side Engine Cooling Fan Blade Kit with Clip (Part No.G5050358868ACD)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Carquest Premium – Radiator: With Engine and Transmission Oil Coolers (Part No.432306)

ACDelco – 12587397 GM Original Equipment Engine Coolant Water Inlet Seal (Part No.G4030310258ACD)

Dorman – Engine Heater Hose Assembly (Part No.626-591)

Felpro – Engine Coolant Thermostat Housing Seal (Part No.35720)

ACDelco – GM Original Equipment Engine Coolant Thermostat (Part No.G4000310418ACD)

ACDelco – 15-10595 GM Original Equipment Engine Coolant Water Outlet (Part No.G4010349243ACD)

NTK – Engine Coolant Temperature Sensor (Part No.EF0075)

Dorman – OE Solutions Auxiliary Cooling Fan Assembly (Part No.G5000829589DOR)

ACDelco – GM Original Equipment Expansion Tank Cap (Part No.G1040206092ACD)

Imperial – Electric Fan – 14" Diameter (Part No.226114)

ACDelco – 15-80880 GM Original Equipment Engine Cooling Fan Motor (Part No.G5006348915ACD)

KAI – Coolant Reservoir (Part No.GM3014113)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12033)

ACDelco – Water Pump Gasket (Part No.G3040344873ACD)

ARP Auto Racing – For Use With Gen Iii/ Ls Series Chevy Small Block, Hex Head, Black Oxide, Chrome (Part No.134-3201)

Carquest Premium – Engine Cooling Fan Motor Connector (Part No.PTC1356)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T7053)

Carquest Premium – Coolant Housing/Water Outlet (Part No.85945)

Victor Reinz – Engine Water Pump Installation Kit (Part No.18-10020-01)

Carquest Premium – Radiator Cap: 15 PSI (Part No.10248)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54218CD)

Popular 2008 Chevrolet Avalanche Engine Cooling Parts Categories

2008 Chevrolet Avalanche Engine Cooling Parts

Engine Cooling Parts Brands To Make Your 2008 Chevrolet Avalanche Last

Popular ACDelco Engine Cooling Parts

Top 2008 Chevrolet Avalanche Engine Cooling Parts from Permatex

FAQs for 2008 Chevrolet Avalanche Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2008 Chevrolet Avalanche?

What are the top-rated 2008 Chevrolet Avalanche Engine Cooling Parts?