2007 Pontiac Torrent Wheels and Tires

Essential 2007 Pontiac Torrent Wheels and Tires

Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)

TPMS Ni Plated Valve Core, 100 Pack

from

$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
  • DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.512229)

Hub and Bearing Assembly

from

$131.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
  • EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
  • KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
  • EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
  • CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Pink, 20 Locks/1 Key (Part No.711-355L)

Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Acorn, 1.39" Length, Pink, 20 Locks/1 Key

from

$26.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Wheel Bearing and Hub Assembly: Front, 5 Studs (Part No.930-634)

Wheel Bearing and Hub Assembly: Front, 5 Studs

from

$255.99
This replacement wheel bearing and hub assembly comes with the hub and critical bearing replacement components included for a complete repair on specific vehicle applications.

Product Features:
  • Complete repair – this assembly includes the wheel hub and application-specific bearing components
  • Saves time – eliminates work required to remove individual corroded components
  • Reliable fit – precision-engineered to match the dimensions of original equipment
  • Trustworthy quality – engineered and tested in the United States
See More

Schrader – TPMS Sensor Service Kit (Part No.20018)

TPMS Sensor Service Kit

from

$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
  • DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Dorman – Hub And Bearing Mounting Bolts, Pack of 3 (Part No.917-503)

Hub And Bearing Mounting Bolts, Pack of 3

from

$20.99
Wheel hub bolts rounded off or have damaged threads? These wheel hub bolts are designed to match the performance of original equipment bolts to secure the hub to the knuckle/spindle on specified vehicles.

Product Features:
  • Direct replacement – these wheel hub bolts are designed to match the performance of the original bolts on specified vehicles
  • Ideal solution – made of durable materials to reliably replace bolts with rounded-off or damaged threads
  • Application-specific – precision-manufactured to securely mount the hub to the vehicle knuckle/spindle
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

McGard – Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size) (Part No.65557GD)

Gold SplineDrive 5 Lug Wheel Installation Kit (M12 x 1.5 Thread Size)

from

$194.99
The convenient way to order Tuner wheel locks and lug nuts. Contains all the hardware that you need to install 4 wheels and tires. Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. The easy-to-use, one-piece wheel locks function like regular lug nuts, but require a special key tool for installation and removal. McGard lug nuts and wheel locks are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability.

Product Features:
  • User friendly key guides the key into the lock pattern for easy installation and removal.
  • The computer generated key designs allow for an infinite number of key patterns.
  • The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
  • Every McGard wheel lock and lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with gold PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key, & Key Storage Pouch
See More

Xtra Seal – Parts Kit For Chrysler (Part No.17-20201AK)

Parts Kit For Chrysler

from

$27.49
Parts Kit For Chrysler

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Taper Bearing Cup

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dorman – Wheel Lug Nut Cover: M24-2.0 Thread, 19 mm Hex, 32.5 mm Depth, Plastic, Black, 1 Pack (Part No.611-620.1)

Wheel Lug Nut Cover: M24-2.0 Thread, 19 mm Hex, 32.5 mm Depth, Plastic, Black, 1 Pack

from

$2.29
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.

Product Features:
  • Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
  • Quality materials – manufactured for durability and a quality finish
  • Simple installation – no special tools required
  • Quality tested – this part has undergone dimensional testing to ensure a quality fit
See More

Dorman – Wheel Lug Nut Cover: M24-2.0 Thread, 19 mm Hex, 32.5 mm Depth, Plastic, Black (Sold by each) (Part No.611-620)

Wheel Lug Nut Cover: M24-2.0 Thread, 19 mm Hex, 32.5 mm Depth, Plastic, Black (Sold by each)

from

$2.29
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.

Product Features:
  • Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
  • Quality materials – manufactured for durability and a quality finish
  • Simple installation – no special tools required
  • Quality tested – this part has undergone dimensional testing to ensure a quality fit
See More

Autel – Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers (Part No.MXSENSORCK)

Component Kit for Rubber & Metal MX-Sensors: Valves, Caps, Cores, Nuts & Washers

from

$68.99
Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:
  • MX-Sensor Components
  • 4 Metal Valves
  • 4 Rubber Valves
  • Rubber Gasket (2×10 pcs)
  • Screw Nut (2×10 pcs)
  • Washer (2×10 pcs)
  • Metal Valve Cap (2X10 pcs)
  • Rubber Valve Cap (2X10 pcs)
  • Valve Core (2X10 pcs)
See More

McGard – Gold SplineDrive Lug Nuts (M12 x 1.5 Thread Size) – Box of 50 Lug Nuts (Part No.65002GD)

Gold SplineDrive Lug Nuts (M12 x 1.5 Thread Size) - Box of 50 Lug Nuts

from

$399.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome with gold PVD producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Requires 65100 Or 65300 Installation Tool sold separately
See More

McGard – Chrome Cone Seat SplineDrive Lug Nut Set (M12 x 1.5 Thread Size) – Set of 4 Lug Nuts (Part No.65357)

Chrome Cone Seat SplineDrive Lug Nut Set (M12 x 1.5 Thread Size) - Set of 4 Lug Nuts

from

$29.99
Why settle for ordinary lug nuts? SplineDrive Lug Nuts combine style and performance. A no-compromise design engineered to fit small diameter recesses in Tuner style wheels. SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts. In addition they are 30% lighter in weight. Like all McGard lug nuts, the chrome plating is guaranteed for life not to rust, chip or peel. SplineDrive lug nuts are manufactured in the USA to meet or exceed O.E.M. standards for safety and durability. SplineDrive lug nuts take safety, dependability and style to the next level.

Product Features:
  • Guaranteed for life not to rust, chip, or peel.
  • Every McGard SplineDrive lug nut is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of safety.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
  • For aluminum wheels only.
  • Requires 65100 Or 65300 Installation Tool sold separately
See More

Dorman – Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread, 1 Pack (Part No.610-544.1)

Wheel Stud: Serrated, M12-1.50 Thread Size, Right Hand Thread, 1 Pack

from

$22.49
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Dorman – M12-1.50 Serrated Wheel Stud – 12.73mm Knurl, 41.5mm Length (Part No.610-254)

M12-1.50 Serrated Wheel Stud - 12.73mm Knurl, 41.5mm Length

from

$3.79
These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety.

Product Features:
  • Durable material – carbon steel meets SAE automotive industry standards for strength and hardness
  • Corrosion resistant – extensive salt spray testing helps ensure years of durability against rust
  • Tensile tested – lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States
See More

Schrader – Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc (Part No.33700)

Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc

from

$51.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:
  • MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
  • COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
  • FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
  • DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
  • COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
  • ADJUSTABLE: 0-40 degree adjustable stem fits into more aftermarket rim sets
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves.

from

$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:
  • Includes 4 Rubber Press-in Valve Stems
  • Compatible with Autel 1-Sensors
  • Compatible with Autel 315MHz & 433MHz MX-Sensors
  • Warranty on Material and Workmanship
  • High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
See More

Carquest Premium – Keyless Entry Module Connector (Part No.PTC2161)

Keyless Entry Module Connector

from

$99.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

Dorman – Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Tuner, 1.298" Length, Chrome, 20 Locks/1 Key (Part No.711-345)

Wheel Lug Nut Lock Set: M12-1.50 Thread, Conical 60, Tuner, 1.298" Length, Chrome, 20 Locks/1 Key

from

$40.49
Prevent wheel theft with this attractive, precision-manufactured wheel lock set. Made of quality materials for durability, these parts have undergone try-on and corrosion resistance testing to ensure long service life. These sets come in different sizes, quantities and appearances, so check the product details to ensure you have the exact number, look and fit you need.

Product Features:
  • Replacement or upgrade – prevent theft with this wheel lock set, which replaces the factory wheel nuts with attractive, corrosion-resistant locking nuts
  • Various options – sets come in different sizes, quantities, and appearances; check the product attributes to ensure you have exactly what you need for your vehicle
  • Durable construction – made from quality materials to strict specifications and carefully tested to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.382" Length, Chrome, 1 Pack (Part No.611-182.1)

Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.382" Length, Chrome, 1 Pack

from

$2.49
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.385" Length, Chrome, 4 Pack (Part No.711-305)

Wheel Lug Nut: M12-1.50 Thread, Conical 60, Bulge Acorn, 1.385" Length, Chrome, 4 Pack

from

$7.99
These wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles. They are engineered from durable materials to exacting specifications for long service life and a perfect fit.

Product Features:
  • Direct replacement – these wheel lug nuts are designed to match the fit, function and performance of the original equipment hardware on specified vehicles
  • Ensure fit – available in a variety of sizes and assortments, please check product dimensions and details to ensure you select the right wheel lug nut(s) for your application
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Schrader – TPMS Sensor Service Kit (Part No.20008)

TPMS Sensor Service Kit

from

$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:
  • DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
  • DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
  • SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
  • VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
  • PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
See More

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece (Part No.VS-925A)

Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece

from

$8.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:
  • TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
  • 0.453″ rim hole compatiblity
  • 200 PSI maximum cold inflation pressure
See More

VDO REDI-Sensor – VDO Metal Clamp-in Stem REDI-Sensor (Part No.SE10001HP)

VDO Metal Clamp-in Stem REDI-Sensor

from

$48.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:
  • Installs right out of the box
  • No sensor programing required
  • Works with all major TPMS scan tools
  • No training required – designed to follow existing OE vehicle relearn procedures
  • Faster TPMS scan tool hunt mode
  • Reduces SKUs
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

VDO REDI-Sensor – VDO Rubber Snap-in Stem REDI-Sensor (Part No.SE10001HPR)

VDO Rubber Snap-in Stem REDI-Sensor

from

$49.99
REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:
  • Installs right out of the box
  • No sensor programing required
  • Works with all major TPMS scan tools
  • No training required – designed to follow existing OE vehicle relearn procedures
  • Faster TPMS scan tool hunt mode
  • Reduces SKUs
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)

315/433MHz Universal Sensor

from

$42.99
Professional installation is strongly suggested

Product Features:
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)

MX-Sensor 1-SensorM Bulk Box (20)

from

$525.99
Product Features:
  • Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
  • Combined Frequency: 315MHz & 433MHz
  • Programmable with Autel TPMS Service Tools
  • Exclusive Press Release Button to Easily Replace Valve Stems
  • Program to Replace 99% of OE Sensors
  • Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
  • Meets SAE Standards J1205 & J1206
  • Maximum Signal Strength / Battery Reliability
  • Professional installation is strongly suggested
  • The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
  • Once programmed, the sensor performs identically to OEM direct-fit sensors
See More

2007 Pontiac Torrent Wheels and Tires

You count on your 2007 Pontiac Torrent to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 128 Wheels and Tires ranging in price from $2.29 to $7,321.99, you’re sure to find everything you need for your 2007 Pontiac Torrent.

Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 14 different brands like Dorman, Autel, and Schrader. 2007 Pontiac Torrent Wheels and Tires start as low as $2.29!

One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 380 extensive product reviews on 2007 Pontiac Torrent Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece with 3.3 stars and VDO Metal Clamp-in Stem REDI-Sensor with 4.5 stars.

Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2007 Pontiac Torrent below to get started!

Top-Rated Wheels and Tires Brands For Your 2007 Pontiac Torrent

Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2007 Pontiac Torrent running right for years to come. In our inventory you’ll find brands like Dorman, Autel, Schrader, and even more.

Popular MOOG Hub Assemblies Wheels and Tires

You’ll find popular MOOG Hub Assemblies brand products across Wheel Bearings. All are waiting to get your 2007 Pontiac Torrent back on the road. Some of the top-rated MOOG Hub Assemblies products in these categories are:
Hub and Bearing Assembly
from $298.99
(6)
Hub and Bearing Assembly
Front Wheel Bearings
Hub and Bearing Assembly
from $232.99
(7)
Hub and Bearing Assembly
Rear Wheel Bearings

Top-Rated Dorman Wheels and Tires


If Dorman are what you’re looking for, our inventory holds plenty. We stock Dorman brand Wheels and Tires for your 2007 Pontiac Torrent, and some of our most reviewed Dorman parts include:

FAQs for 2007 Pontiac Torrent Wheels and Tires

What are the most purchased Wheels and Tires for the 2007 Pontiac Torrent?

Out of 128 Wheels and Tires for the 2007 Pontiac Torrent, the most popular in our inventory are:
MX-Sensor 1-Sensor (Rubber)
from $41.99
This product is not rated
MX-Sensor 1-Sensor (Rubber)
Tire Pressure Sensors

What are the top-rated 2007 Pontiac Torrent Wheels and Tires?

Top-rated Wheels and Tires for your 2007 Pontiac Torrent based on customer reviews/ratings are:
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
from $41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
“Was everything I expected”
VDO Metal Clamp-in Stem REDI-Sensor
from $48.99
(54)
VDO Metal Clamp-in Stem REDI-Sensor
“It works perfectly ! Will buy again for my Acura MDX Thanks to advanceautoparts.”
VDO Rubber Snap-in Stem REDI-Sensor
from $49.99
(26)
VDO Rubber Snap-in Stem REDI-Sensor
“Good quality and price for this Tire Pressure Monitoring Sensor.”