2007 Pontiac Grand Prix Performance and Racing Products
Find Your Specific 2007 Pontiac Grand Prix Performance and Racing Products
Below you will find various in-demand Pontiac Performance and Racing Products, components and accessories for your 2007 Grand Prix. Advance Auto Parts has popular Grand Prix parts like Performance Air Intake Kits, Performance Exhaust Products, Performance Engines and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Grand Prix model years including
1999,
2000,
2001,
2002,
2003,
2004,
2005,
2006,
2008 and more. Select a category of 2007 Pontiac Grand Prix Performance and Racing Products below and start saving instantly.
Popular 2007 Pontiac Grand Prix Performance and Racing Products Categories
Essential Performance and Racing Products for 2007 Pontiac Grand Prixes
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1436)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Energy Suspension – Coil Spring Isolator Set (Part No.3.6108R)
from
$12.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Lasts from 3 to 10 Times Longer
- Assemble to Chassis Same Way as OEM
- Maintains Factory Ride Characteristics
- Simple Way to Increase Vehicle Height
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Million Mile Air Filter (Part No.63-3059)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)
from
$159.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Non-Rotator Style: Dyno Tested and Street Proven
- Great Match to Edelbrock Camshaft Kit
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)
from
$479.99
LS Cast Iron Exhaust Manifold
Mr. Gasket – Ultra Seal: Screw-In Rocker Arm Studs (Part No.1076)
from
$75.99
Mr. Gasket screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street applications. OE style press in rocker studs can actually pull out of the cylinder head when using high lift camshafts. Includes sixteen studs 3/8-24 x 1.47 inch long top x 7/16-14 bottom.
Product Features:
See More
Product Features:
- Black Oxide Coated Grade 8 Steel
- Kit Contains 16 Studs
- Easy To Install
- Heat Treated Steel
- Grade 8 Steel
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$106.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)
from
$169.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Competition Cams – Pushrod, Spring and Retainer Kit for GM LS (Part No.54100)
from
$719.99
COMP Cams GM LS Series RPM Valve Train Upgrade Kits replace stock valve train components for more usable horsepower and a higher rpm operating range. This kit includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers.
Product Features:
See More
Product Features:
- For GM LS series applications
- includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers
- Replaces stock valve train components for more usable horsepower and higher rpm range
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Product Features:
Accel – Handheld Computer Programmer for Enhanced Performance and Tuning Control (Part No.49505)
from
$425.99
Revolutionary handheld tuner quickly and easily reprograms your vehicle for more power across the entire rpm range! 50 State Legal!
Product Features:
See More
Product Features:
- Average gains in excess of 30 HP/40 ft.-lbs. for gas and 80 HP/150 ft.-lbs. diesel*
- HD 2.8¿ color screen with updated interface for easier and faster modifications
- HD 2.8┐ color screen with updated interface for easier and faster modifications
- Increased memory and faster processor for improved tuning plus faster updating
- Active fuel management control*
- Performance test (0-60, ╝ mile testing)
- Performance test (0-60, ¼ mile testing)
- Internet updating using PC software
- Tire size adjustment
- Axle gear ratio adjustment
- Shift point and firmness adjustment*
- Speed and rev limiter adjustments*
- Carb EO # D-745
- Diagnostic capability ¿ read and clear trouble codes with explanation of codes
- Diagnostic capability ┐ read and clear trouble codes with explanation of codes
Edelbrock – Water Pump for Pontiac, Standard Rotation in Black Finish (Part No.88563)
from
$405.99
Edelbrock #88563 Water Pump Pontiac 389-455 standard rotation black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooli
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 4.50 in. Block To Hub Height
- Black Finish
Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)
from
$551.99
Edelbrock #8895 Water Pump GM gen III ls1 & gen iv ls engines insert style ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “supe
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.750 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 6.00 in. Block To Hub Height
- Natural Finish
Mr. Gasket – Cam Bolt Lock Plate Kit (Part No.948G)
from
$20.99
Mr. Gasket cam locking plates feature a steel retainer plate designed to secure the cam gear bolts from coming loose and backing out, preventing costly engine damage. Retainer plate fits under bolt heads allowing tabs to be bent against hex head flats creating a secure positive lock.
Product Features:
See More
Product Features:
- Black oxide finished steel
- Includes (3) grade 5 bolts & locking plate
- Fits Chevrolet Small and Big Block without OE roller cam
- Tabs bend up around bolt head to secure
Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam (Part No.51-224-4)
from
$298.99
HYDRAULIC – Xtreme Energy: High performance street, very strong mid-range, headers and 2200+ stall.
Product Features:
See More
Product Features:
- HYDRAULIC – Xtreme Energy: High performance street, very strong mid-range, headers and 2200+ stall.
- 274/286 Advertised Duration, 230/236 Duration @ .050″, .488″/.491″ Lift, 110 Lobe Separation
- Valve spring upgrade required
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
- 273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26918-16 with this camshaft
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$29.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)
from
$29.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 160 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully opens at Correct Temperature Consistently Regardless of engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – Head Gasket (Part No.1130G)
from
$37.99
Mr. Gasket Steel Shim Cylinder Head Gaskets are for high performance street machines, drag racing and oval track racing. With today’s extreme compression ratios you need stronger more durable gaskets. Mr. Gasket steel shim gaskets are made from .020 inch steel shim stock which is thinner than most composite gaskets increasing engine compression. Stress formed embossments will seal the extreme cylinder pressure.
Product Features:
See More
Product Features:
- Manufactured from .020″ steel shim stock.
- Thinner than composition head gaskets – increases engine compression.
- Stress formed embossments seal extreme cylinder pressures.
- For high performance street, drag race and oval track use.
Mr. Gasket – Ultra Seal: Head Gasket (Part No.5780G)
from
$74.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.
Product Features:
See More
Product Features:
- Five layer (graphite core/perforated steel outer layers) composite construction
- Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
- Provides excellent stability, compressibility and high temperature endurance
- Coated with high temperature silicone to ensure sealing of engine fluids
- Will not brinell (indent) aluminum cylinder heads
- For high performance street, drag race and oval track use
- Compatible w/High Octane Fuel
- Compatible With Exotic Fuel
Competition Cams – Magnum 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set (Part No.7513-16)
from
$165.99
Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.
Product Features:
See More
Product Features:
- 3/8″ Diameter, 7.800″ Length
- Magnum Pushrods for Small Block Chevy
- One-piece .080″ wall chromemoly steel tubing
- Heat-treated for extended durability and guide plate compatibility
- Precision formed and reinforced pushrod end
Edelbrock – Pushrod Set for S/B Chevy (Part No.9630)
from
$199.99Product Features:
- Case-Hardened Tubing
- Welded Ends
- 5/16 in. Diameter
- Use with or without Hardened Steel Guideplates
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1650)
from
$83.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
Spectre – Spectre Replacement Air Filter (Part No.HPR6479)
from
$42.99
Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use. Use a Spectre Accucharge cleaning and re-oiling kit, part number HPR4820, to maintain your filter’s condition.
Product Features:
See More
Product Features:
- Designed to be superior to stock paper filters
- Comes pre-oiled
- Designed for an easy installation with OE fit
- Made with pre-dyed media for lasting color
Spectre – Spectre Replacement Air Filter (Part No.HPR0326)
from
$41.49
Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use. Use a Spectre Accucharge cleaning and re-oiling kit, part number HPR4820, to maintain your filter’s condition.
Product Features:
See More
Product Features:
- Designed to be superior to stock paper filters
- Comes pre-oiled
- Designed for an easy installation with OE fit
- Made with pre-dyed media for lasting color
Upgrade your 2007 Pontiac Grand Prix with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2007 Pontiac Grand Prix, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Performance and Racing Products are key to keeping your Grand Prix functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Performance and Racing Products for the 2007 Pontiac Grand Prix, designed to meet your needs without breaking the bank.
From
Performance Air Intake Kit
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2007 Pontiac Grand Prix at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $16.99 to $1,208.00, with
an average price of $364.11.
Our 41 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 2007 Pontiac Grand Prix without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Pontiac Grand Prix, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, Flowmaster Inc., Monroe, and more.
K&N Performance and Racing Products
start at just $17.99 and boast an impressive 4.8 stars average rating from customers.
Flowmaster Inc. and Monroe also bring quality to the table, with Performance and Racing Products available starting at $107.99, and at an average 4.4 stars rating.
With 294 customer reviews and counting, our 2007 Pontiac Grand Prix Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2007 Pontiac Grand Prix is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Prix in top shape, all in one place.
Start shopping confidently below for your 2007 Pontiac Grand Prix!
Best-Selling Performance Air Intake Kits for 2007 Pontiac Grand Prixes
Enhance the driving experience in your Pontiac with 1 quality Performance Air Intake Kit components, starting at $367.99.
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Million Mile Air Filter (Part No.63-3059)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Most Popular 2007 Pontiac Grand Prix Performance Exhaust Products
Customize your Pontiac with 4 Performance Exhaust Products products
like Performance Exhaust Mufflers,
Performance Exhaust Manifold Gaskets, and
Performance Exhaust Headers, all
priced under $599.99.
Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)
from
$169.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Mr. Gasket – Mls Exhaust Gasket (Part No.4805G)
from
$56.99
Multi-Layered Steel (MLS) exhaust and header collector gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
Product Features:
See More
Product Features:
- Multi Layer Stainless Steel 3-Layers
- Round Port 1.75″ Diameter
- Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
- Thickness .072″
- Fits GM LS Series Engines 1997-’15
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501-3HKR)
from
$599.99
LS Cast Iron Exhaust Manifold
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)
from
$479.99
LS Cast Iron Exhaust Manifold
Top Picks for 2007 Pontiac Grand Prix Performance Engines
Upgrade Pontiac Grand Prixes with top-quality Performance Engines parts, including 31 OEM and aftermarket selections for your 2007 model.
Competition Cams – VALVE SPRING KIT, FOR LS 1.310" BEEHIVE 1 KT (Part No.26918CS-KIT)
from
$528.99
This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625″ maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life.Kit Includes:26918-16 Beehive Valve Springs774-16 Steel Retainers623-16 7° Steel Valve Locks511-16 Valve Seals4705-16 Spring Seats
Product Features:
See More
Product Features:
- Kit includes part #26918-16 Beehive valve springs and matching steel retainers, 7° valve locks, valve seals and spring seats
- Kits designed for hydraulic roller cams
- .625″ maximum lift springs
Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
- 273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26918-16 with this camshaft
Mr. Gasket – Ls1 Late Thermostat (Part No.6367)
from
$36.99
Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.
Product Features:
See More
Product Features:
- Opens sooner than stock at 160 degrees
- High flow design for performance applications
- Includes rubber o-ring seal/gasket
- Incorporates pressure relief valve
Competition Cams – GM LS Beehive Valve Spring Kit w/ Chromemoly Steel Retainers; .600" Max Lift (Part No.26915CS-KIT)
Competition Cams – VALVE SPRINGS, 1.310" BEEHIVE 1 ST (Part No.26918-16)
from
$534.99
With a .625″ maximum lift, these Beehive Valve Springs were designed for hydraulic roller cams in LS1, LS2 and LS6 engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.
Product Features:
See More
Product Features:
- Seat pressure: 125 lbs. @ 1.800″, Open Pressure: 367 lbs. @ 1.150″
- O.D.: 1.075″ (Top) 1.310″ (Bottom), I.D.: .650″ (Top) .885″ (Bottom)
- Designed for hydraulic roller cams
- .625″ maximum lift, 1.310″ O.D.
- Originally designed for LS engine applications but will work in 5.7L Hemi engines and many others
Competition Cams – 7 Degree Steel Retainer Set of 16 for GM GEN III w/ 26915/26918 Beehive Springs (Part No.774-16)
from
$85.99
This 7° steel retainer for GM Gen III applications with #26915 or #26918 Beehive Valve Springs is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.
Product Features:
See More
Product Features:
- 7° angle retainers for 1.055″ diameter valve springs, stock diameter valve stems
- O.D. – 1.030″, Step 1 – .640″
- Precision machined from 4140 chromemoly steel and finished in black oxide
- Designed for positive location when combined with COMP Cams high-quality valve springs
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1000)
from
$61.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Competition Cams – GM LS Dual Valve Spring Kit with Titanium Retainers (Part No.26926TI-KIT)
from
$1208.00
GM LS Dual Valve Spring Kit with Titanium Retainers
Competition Cams – GM LS Dual Valve Spring Kit with Tool Steel Retainers (Part No.26926TS-KIT)
from
$1020.00
GM LS Dual Valve Spring Kit with Tool Steel Retainers
Competition Cams – Xtreme Energy 191/201 Hydraulic Roller Cam for GM 3800/3.8L V6 (Part No.76-800-9)
from
$787.99
Xtreme Energy 191/201 Hydraulic Roller Cam for GM 3800/3.8L V6
Competition Cams – Xtreme Energy 210/220 Hydraulic Roller Cam for GM 3800/3.8L V6 (Part No.76-802-9)
from
$787.99
Xtreme Energy 210/220 Hydraulic Roller Cam for GM 3800/3.8L V6
Competition Cams – ENGINE ROCKER ARM (Part No.19025-16)
from
$764.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.19024-16)
from
$764.99
ENGINE ROCKER ARM
Competition Cams – Pushrod, Spring and Retainer Kit for GM LS (Part No.54100)
from
$719.99
COMP Cams GM LS Series RPM Valve Train Upgrade Kits replace stock valve train components for more usable horsepower and a higher rpm operating range. This kit includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers.
Product Features:
See More
Product Features:
- For GM LS series applications
- includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers
- Replaces stock valve train components for more usable horsepower and higher rpm range
Competition Cams – 16 Springs (Part No.26926-16)
from
$566.99
16 Springs
Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)
from
$551.99
Edelbrock #8895 Water Pump GM gen III ls1 & gen iv ls engines insert style ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “supe
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.750 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 6.00 in. Block To Hub Height
- Natural Finish
Competition Cams – CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA (Part No.54-426-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power. Without sacrificing low RPM torque, these camshafts extend the RPM potential of GM LS e
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI XE-R 238/240 Hydraulic Roller Cam (Part No.54-448-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam (Part No.54-412-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam (Part No.54-414-11)
from
$541.99
HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
- 269/273 Advertised Duration, 216/220 Duration @ .050″, .525″/.532″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26915-16 with this camshaft
Competition Cams – 7 Titanium Retainer Set of 16 for GM LS with 26915/26918 Beehive Springs (Part No.772-16)
from
$506.99
7 Titanium Retainer Set of 16 for GM LS with 26915/26918 Beehive Springs
Competition Cams – Xtreme Energy 201/205 Hydraulic Roller Cam for GM 3800/3.8L V6 (Part No.76-801-9)
from
$505.99
Xtreme Energy 201/205 Hydraulic Roller Cam for GM 3800/3.8L V6
Competition Cams – 16 Springs (Part No.26915-16)
from
$379.99
16 Springs
Competition Cams – Hi-Tech 7.400" Long, .080" Wall, 5/16" Diameter Pushrod Set (Part No.7955-16)
from
$281.99
Hi-Tech 7.400" Long, .080" Wall, 5/16" Diameter Pushrod Set
In-Demand Performance Oil Filters for 2007 Pontiac Grand Prixes
Select from 2 premium Performance Oil Filters parts for your 2007 Pontiac Grand Prix, with prices ranging from $17.99 to $17.99.
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Most Sold 2007 Pontiac Grand Prix Performance Air Filters
Explore our best-selling Pontiac parts for the 2007 Grand Prix among 1 OEM and aftermarket options starting from $42.99.
Spectre – Spectre Replacement Air Filter (Part No.HPR6479)
from
$42.99
Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use. Use a Spectre Accucharge cleaning and re-oiling kit, part number HPR4820, to maintain your filter’s condition.
Product Features:
See More
Product Features:
- Designed to be superior to stock paper filters
- Comes pre-oiled
- Designed for an easy installation with OE fit
- Made with pre-dyed media for lasting color
Top-Rated Performance and Racing Products Brands For Your 2007 Pontiac Grand Prix
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2007 Pontiac Grand Prixes. Below you’ll find some of our best rated Performance and Racing Products from K&N, Flowmaster Inc., and Monroe, and more. Performance and Racing Products from these brands that fit a 2007 Grand Prix start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2007 Pontiac Grand Prix Performance and Racing Products
When it comes to maintaining or upgrading your 2007 Pontiac Grand Prix, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2007 Pontiac Grand Prix. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $134.66. Plus, with over 194 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$367.99
(14)
Cold Air Intake: Adds Up To 13 Horsepower, With Million Mile Air Filter
“Thanks for a great product. I just installed a new cold air intake
for my brand new 2006 impala SS. Waited for the product to come out and
finally”
from
$17.99
(47)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
“Good filter that I use regularly”
from
$17.99
(133)
Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine
“Solid filter”
Popular Flowmaster Inc. 2007 Pontiac Grand Prix Performance and Racing Products
Flowmaster Inc. auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2007 Pontiac Grand Prix owner should feel confident when installing genuine Flowmaster Inc. parts in their vehicle. To ensure the best fit and performance for your 2007 Grand Prix, Advance Auto Parts carries a full inventory of 1 Flowmaster Inc. Performance and Racing Products. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Flowmaster Inc. Performance and Racing Products range up to $169.99, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$169.99
(3)
50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound
“Muffler was delivered on time and fit my 1994 Ford Ranger perfectly, and was easy to install (once I got the old one off). The whole muffler felt ‘sol”
FAQs for 2007 Pontiac Grand Prix Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2007 Pontiac Grand Prixes?
Out of 41 Performance and Racing Products that fit 2007 Pontiac Grand Prixes, the following parts are the top sellers:
- Spectre Replacement Air Filter (10162702) – $42.99
- Strut-Mate Suspension Strut Mount (18570875) – $107.99
- 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (20290811) – $169.99
What’s the price range for 2007 Pontiac Grand Prix Performance and Racing Products?
Performance and Racing Product prices for the 2007 Pontiac Grand Prix start at $16.99 and go up to $1,208.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2007 Pontiac Grand Prix?
The average price for Performance and Racing Products for the 2007 Pontiac Grand Prix is $364.11. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Pontiac Grand Prix model years?
What are the cheapest Performance and Racing Products for my 2007 Pontiac Grand Prix?
The cheapest 2007 Pontiac Grand Prix Performance and Racing Products we carry in stock are:
- Hi-Tech 7.400" Long, .080" Wall, 5/16" Diameter Pushrod (50289381) – $16.99
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (16400033) – $17.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120000) – $17.99
- Camshaft Lock Plate w/ Bolts for GM LS GEN III/IV with 3 Bolt Camshaft (50288119) – $18.99
- 1 Spring (50288673) – $23.99
What are the top-rated Performance and Racing Products that fit the 2007 Pontiac Grand Prix?
Out of 294 reviews by customers, our 2007 Pontiac Grand Prix Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2007 Pontiac Grand Prix and their top-rated products:
- Performance Oil Filters
- Performance Air Filters
- Performance Air Intake Kits
What types of Performance and Racing Products do you sell for my 2007 Pontiac Grand Prix?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 2007 Pontiac Grand Prix:
Can I get help with 2007 Pontiac Grand Prix Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Performance and Racing Products and more.
What is your return policy for Pontiac Grand Prix Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Pontiac Grand Prix Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
