2007 Mitsubishi Lancer Steering and Chassis Parts

Name: Tie Rod End
Brand: Driveworks
SKU: DW-EV80587
Price: 14.29 USD

Below you will find various in-demand Mitsubishi Steering and Chassis Parts, components and accessories for your 2007 Lancer. Advance Auto Parts has popular Lancer parts like Ball Joints, Sway Bars, Power Steering Parts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Lancer model years including 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and more. Select a category of 2007 Mitsubishi Lancer Steering and Chassis Parts below and start saving instantly.

Popular 2007 Mitsubishi Lancer Steering and Chassis Parts Categories

Sway Bars and Kits

Power Steering Coolers

Suspension Ball Joint Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Power Steering Pressure Hoses

Camber Kits

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Rack and Pinion Boots

Rear Alignment Kits

Essential Steering and Chassis Parts for 2007 Mitsubishi Lancers

from

$14.29

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$308.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$437.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$41.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

from

$127.99

Whiteline adjustable camber kits allow for easy on-car adjustment and fine tuning of camber settings resulting in improved traction, increased cornering grip and better tyre life – ultimately improving overall performance. The kit includes low compliance synthetic elastomer bushings which maintain preferred alignment settings as well as enhanced steering response.

Product Features:

Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$235.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.

from

$79.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$45.49

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hardware included for easier installation (where applicable)
Knurling improves retention between the control arm/knuckle and ball joint housing
Snap ring design adds an additional safety feature to secure the ball joint in the knuckle

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$19.73

Steering Rack Boot K

from

$17.94

The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$20.29

DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:

Designed to meet OE Form, Fit, and Function.
Performance tested to ensure durability and reduce tire wear.
Precision engineered for improved ride and steering response.
Hardware included for ease of installation (where applicable)

from

$44.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$62.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$74.99

Do you have every sway bar link on the shelf? Well you don’t need too, Whiteline have developed a clever cut to length universal sway bar link that has a 10mm ball stud has a working range of 80-320mm c/c. 1 part number covers hundreds of applications.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

from

$165.99

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$39.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$2.99

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$113.99

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Heat/abrasion tubing protects vital areas

from

$229.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$128.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$16.29

Driveworks sway bar link kits are made to meet or exceed OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks chassis parts help ensure improved steering response and durability.

from

$30.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$29.49

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

Upgrade your 2007 Mitsubishi Lancer with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2007 Mitsubishi Lancer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mitsubishi or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Lancer functioning at its best. At Advance Auto Parts, we offer a wide selection of 50 Steering and Chassis Parts for the 2007 Mitsubishi Lancer, designed to meet your needs without breaking the bank. From Ball Joint replacements to Sway Bars upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2007 Mitsubishi Lancer at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $5.20 to $337.99, with an average price of $57.50. Our 50 Steering and Chassis Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 2007 Mitsubishi Lancer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Mitsubishi Lancer, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, Cardone, Moog, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. Cardone and Moog also bring quality to the table, with Steering and Chassis Parts available starting at $9.79, and at an average 4 stars rating. With 309 customer reviews and counting, our 2007 Mitsubishi Lancer Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Mitsubishi Lancer is always ready to roll. We’re committed to providing you with everything you need to keep your Lancer in top shape, all in one place. Start shopping confidently below for your 2007 Mitsubishi Lancer!

Best-Selling Ball Joints for 2007 Mitsubishi Lancers

Enhance the driving experience in your Mitsubishi with 11 quality Ball Joint components, starting at $25.99.

show more show less

from

$62.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$125.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$125.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$25.99

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$79.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$44.99

PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$149.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$149.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$128.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$128.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$45.49

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hardware included for easier installation (where applicable)
Knurling improves retention between the control arm/knuckle and ball joint housing
Snap ring design adds an additional safety feature to secure the ball joint in the knuckle

Most Popular 2007 Mitsubishi Lancer Sway Bars

Customize your Mitsubishi with 10 Sway Bars products like Sway Bar Link Kits, Sway Bar Link Bushing Kits, and Sway Bars and Kits, all priced under $253.99.

show more show less

from

$19.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$30.49

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$9.79

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$23.99

Sway Bar Link Kit

from

$16.29

from

$253.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 18mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$34.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Corrosion resistant coatings
Includes components and hardware necessary for a complete replacement
Hardware functionality matches original design requirements
Application specific for this vehicle

from

$26.89

The Sankei 555 Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$18.79

Matches OE form, fit and function
Corrosion resistant coatings
Includes components and hardware necessary for a complete replacement
Hardware functionality matches original design requirements
Application specific for this vehicle

from

$5.20

The FEQ Sway Bar Link Kit is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

Top Picks for 2007 Mitsubishi Lancer Power Steering Parts

Upgrade Mitsubishi Lancers with top-quality Power Steering Parts parts, including 17 OEM and aftermarket selections for your 2007 model.

show more show less

from

$48.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$28.49

Product Features:

Power steering oil cooler
3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$163.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$337.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$28.99

All Steering Power Filter

from

$28.99

All Steering Power Filter

from

$28.99

POWER STEERINGFILTER

from

$23.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

Zinc coated tubes protect against rust and corrosion

from

$19.73

Steering Rack Boot K

from

$6.99

POWER STEERINGFILTER

In-Demand Tie Rods for 2007 Mitsubishi Lancers

Select from 9 premium Tie Rods parts for your 2007 Mitsubishi Lancer, with prices ranging from $14.29 to $70.06.

show more show less

from

$27.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$51.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA

from

$22.99

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$14.29

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$44.48

Tie Rod

from

$37.69

Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:

Delphi tie rods are fatigue tested to avoid failure
Delphi includes the necessary accessories for a complete job
Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

from

$70.06

Tie Rod

from

$34.59

Sankei 555 tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Sankei 555 tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:

Original Equipment quality
Coated surface to prevent corrosion and rust
Fatigue tested for structural integrity
Precision made components for an ideal fit and function
Adjustable for proper alignment
Premium Polychloroprene rubber boots

from

$32.99

Matches OE form, fit and function
Coated or plated for corrosion protection
Ball joint is pre-greased
Easy access wrench flat allows for the use of a socket for easy installation and removal
Full ball stud

Most Sold 2007 Mitsubishi Lancer Camber Kits

Explore our best-selling Mitsubishi parts for the 2007 Lancer among 2 OEM and aftermarket options starting from $34.99.

show more show less

from

$34.99

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$48.99

Suffering uneven tyre wear? Sounds like poor alignment. Whiteline camber bolts provide the largest adjustment range (of up to +/- 1.5deg) to get that alignment back in check. Unlike other ‘friction’ lock designs we use a positive toothed lock washer which means NO SLIP. Simple to adjust and lock time after time with out slipping.

Product Features:

Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

Top-Rated Steering and Chassis Parts Brands For Your 2007 Mitsubishi Lancer

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2007 Mitsubishi Lancers. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Cardone, and Moog, and more. Steering and Chassis Parts from these brands that fit a 2007 Lancer start at just $9.79 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 2007 Mitsubishi Lancer Steering and Chassis Parts

When it comes to maintaining or upgrading your 2007 Mitsubishi Lancer, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 2007 Mitsubishi Lancer. With over 4 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $23.32. Plus, with over 208 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

from
$28.49

(83)

Power Steering Oil Cooler

“Installed and properly working”

Popular Cardone 2007 Mitsubishi Lancer Steering and Chassis Parts

Cardone auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2007 Mitsubishi Lancer owner should feel confident when installing genuine Cardone parts in their vehicle. To ensure the best fit and performance for your 2007 Lancer, Advance Auto Parts carries a full inventory of 6 Cardone Steering and Chassis Parts. Plus you will be keeping your Mitsubishi in peak condition while saving money because prices on these Cardone Steering and Chassis Parts range from $31.99 to $337.99, plus, with more than 62 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$337.99

This product is not rated

Remanufactured Rack and Pinion Assembly

“”

from
$31.99

This product is not rated

Power Steering Filter

“”

from
$163.99

This product is not rated

Remanufactured Power Steering Pump

“”

FAQs for 2007 Mitsubishi Lancer Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2007 Mitsubishi Lancers?

Out of 50 Steering and Chassis Parts that fit 2007 Mitsubishi Lancers, the following parts are the top sellers:

New Power Steering Filter (10417593) – $31.99
Camber Bolt Kit (10361721) – $20.29
Camber Adjusting Kit (20518167) – $34.99

What’s the price range for 2007 Mitsubishi Lancer Steering and Chassis Parts?

Steering and Chassis Part prices for the 2007 Mitsubishi Lancer start at $5.20 and go up to $337.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2007 Mitsubishi Lancer?

The average price for Steering and Chassis Parts for the 2007 Mitsubishi Lancer is $57.50. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Mitsubishi Lancer model years?

Yes, we currently carry Steering and Chassis Parts for 15 model years of Mitsubishi Lancers between 2002 and 2017. Steering and Chassis Parts are bought most frequently for the following model years: 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, and 2009.

What are the cheapest Steering and Chassis Parts for my 2007 Mitsubishi Lancer?

The cheapest 2007 Mitsubishi Lancer Steering and Chassis Parts we carry in stock are:

Sway Bar Link Kit (10783409) – $5.20
POWER STEERINGFILTER (50167394) – $6.99
Stabilizer Bar Bushing Kit (11315356) – $9.79
Mounting Kit System (6014844) – $11.49
Tie Rod End (10195670) – $14.29

What are the top-rated Steering and Chassis Parts that fit the 2007 Mitsubishi Lancer?

Out of 309 reviews by customers, our 2007 Mitsubishi Lancer Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2007 Mitsubishi Lancer and their top-rated products:

Ball Joints
- Ball Joint (21880880) – $62.99
Sway Bars
- Ball Joint (21880880) – $62.99
Tie Rods
- Ball Joint (21880880) – $62.99

What types of Steering and Chassis Parts do you sell for my 2007 Mitsubishi Lancer?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2007 Mitsubishi Lancer:

Can I get help with 2007 Mitsubishi Lancer Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mitsubishi Steering and Chassis Parts and more.

What is your return policy for Mitsubishi Lancer Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Mitsubishi Lancer Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2007 Mitsubishi Lancer Steering and Chassis Parts

Driveworks – Tie Rod End (Part No.DW-EV80587)

Cardone – Remanufactured Power Steering Pump (Part No.21-337)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2154)

MOOG – Tie Rod End (Part No.ES800874)

Whiteline – Control Arm Upper Inner Bushing (Part No.KCA329)

Whiteline – Sway Bar 24Mm X Heavy Duty Blade Adjustable (Part No.BMR86XZ)

Rare Parts – Ball Joint (Part No.RP11477)

Carquest Premium – Ball Joint (Part No.410-288442)

Cardone – New Power Steering Filter (Part No.20-0038F)

Cardone – Power Steering Filter (Part No.20-0012F)

EMPI – Steering Rack Boot K (Part No.M1030948717EMP)

EMPI – re Steering Rack Boot (Part No.M1010186453EMP)

Driveworks – Camber Bolt Kit (Part No.DW-K90474)

MOOG – Ball Joint (Part No.K80373)

MOOG – Ball Joint (Part No.K500063)

Whiteline – Sway Bar Link (Part No.W23180)

Whiteline – Sway Bar Link (Part No.KLC144)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – Mounting Kit System (Part No.226201)

Carquest Premium – 3/8" I.D. Return Hose J189 (Part No.36196)

Carquest Premium – 3/8" ID Return Hose (sold by each) (Part No.34995)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Banjo x 16mm Banjo (Part No.37653)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK622989)

Dorman – Control Arm (Part No.520-885)

Driveworks – Suspension Sway Bar Link Kit (Part No.DW-K90247)

MOOG – Stabilizer Bar Link (Part No.K80374)

MOOG – Stabilizer Bar Link (Part No.K750196)

MOOG – Ball Joint (Part No.K500063)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620345)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620384)

Driveworks – Ball Joint (Part No.DW-K80373)

Rare Parts – Ball Joint (Part No.RP11477)

MOOG – Ball Joint (Part No.K80373)

Rare Parts – Control Arm with Ball Joint (Part No.RP11823)

Rare Parts – Control Arm with Ball Joint (Part No.RP11824)

Dorman – Control Arm (Part No.520-885)

Dorman – Suspension Control Arm (Part No.520-886)

Carquest Premium – Ball Joint (Part No.410-288442)

MOOG – Stabilizer Bar Link Kit (Part No.K90247)

MOOG – Stabilizer Bar Link (Part No.K80374)

MOOG – Stabilizer Bar Bushing Kit (Part No.K200830)

Driveworks – Sway Bar Link Kit (Part No.DW-K80374)

Driveworks – Suspension Sway Bar Link Kit (Part No.DW-K90247)

Whiteline – Sway Bar 18Mm Heavy Duty (Part No.BMR79)

Beck/Arnley – Stabilizer Link Kit (Part No.101-5000)

Sankei 555 – Sway Bar Link (Part No.L1030445482SNK)

Beck/Arnley – Stabilizer End Link (Part No.101-5266)

First Equipment Quality – Sway Bar Link Kit (Part No.L1029394522FEQ)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Cardone – Power Steering Filter (Part No.20-P038F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Cardone – Remanufactured Power Steering Pump (Part No.21-5403)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2133)

BBB Industries – Power Steering Filter (Part No.991-FLT4)

BBB Industries – Power Steering Filter (Part No.991-FLT2)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

Carquest Premium – Power Steering End Fittings, 16mm Male "O" Ring x 3/8" Beaded Tube (Part No.34817)

EMPI – Steering Rack Boot K (Part No.M1030948717EMP)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

MOOG – Tie Rod End (Part No.ES3704)

MOOG – Tie Rod End (Part No.EV80587)

Driveworks – Tie Rod End (Part No.DW-ES3704)

Driveworks – Tie Rod End (Part No.DW-EV80587)

Sankei 555 – Tie Rod (Part No.M3001405176SNK)

Delphi – Tie Rod End (Part No.M30101230250DEL)

TRW – Tie Rod (Part No.M3001405176TRW)

Sankei 555 – Sankei 555 Tie Rod End (Part No.M3010109149SNK)

Beck/Arnley – Tie Rod End (Part No.101-4159)

MOOG – Camber Adjusting Kit (Part No.K90474)

Whiteline – Camber Adjusting Bolt (Part No.KCA412)