2007 Mercury Grand Marquis Valve Cover and Cylinder Heads
More 2007 Mercury Grand Marquis Valve Cover and Cylinder Heads
Find your specific 2007 Mercury Grand Marquis original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2007 Mercury Grand Marquis Valve Cover and Cylinder Heads
NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0008)
from
$34.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Walker Products – Cyl. Head Temp Senso (Part No.A3035415005WKR)
from
$31.71
The Walker Cylinder Head Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1014)
from
$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Edelbrock – Ford 429-460 Head Bolt Kit (Part No.8566)
from
$338.99
The Edelbrock #8566 bolt kit contain a complete set of the highest quality head bolts and hardened washers available. Cold-formed to ensure molecular integrity and heat treated prior to thread rolling and machining. Reduced diameter bolt heads eliminate t
See More
Edelbrock – 289-302 Ford Head Bolt Kit (Part No.8552)
from
$107.99Product Features:
- Highest Quality Head Bolts
- Cold-Formed/Heat Treated
- Ensures Molecular Integrity
- Reduced Diameter Bolt Heads
- Hardened/Parallel-Ground Washers Included
- Rated At 170000 psi
- Manufactured By ARP
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71328)
from
$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Mahle – Cyl. Head Bolt Set (Part No.A3031566828MAH)
from
$68.99
Cyl. Head Bolt Set
Dorman – STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (sold by each) (Part No.675-131)
from
$3.99
Cylinder head bolt stripped or broken? This engine cylinder head bolt directly replaces the original bolt on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – designed to match the fit and function of the original cylinder head bolt on certain vehicles
- Corrosion resistant – withstands elements for reliable service life
- Application specific – made to hold cylinder head in place on specific vehicles
- Trustworthy quality – backed by team of engineers and inspectors in United States
Sealed Power – Engine Exhaust Valve (Part No.V-4603)
from
$16.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Mahle – Mahle Exhaust Valve (Part No.A4050200618MAH)
from
$25.55
MAHLE manufactures intake and exhaust valves in forged and hot-extruded versions in a multitude of materials for gasoline and diesel engines of every size. Depending on the stresses they are subjected to, the valves are reinforced around the seat, hardened, nitrided, or chrome-plated. Sodium-filled hollow valves can be used for extremely high thermal and mechanical loads. Since stresses on the components continue to rise in modern engines, MAHLE is focusing on the ongoing development of cooled valves.
Product Features:
See More
Product Features:
- OE Quality
- Optimized for strength
- Heat and corrosion resistant
- Chromium plated or nitrided
- Stem optimized to resist wear
Sealed Power – Engine Intake Valve (Part No.V-3956)
from
$10.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated stem
- Hard coating added to surface for strength & aiding in lubrication
- Note – coating added in varying thicknesses depending on application
- Innovative design, using leading edge materials
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Exhaust Valve (Part No.V-1961)
from
$8.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Felpro – Cylinder Head Gasket Set (Part No.HS 9280 PT-3)
from
$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket Set (Part No.HS 8548 PT-6)
from
$88.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Premium quality parts you can trust
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – Cylinder Head Gasket Set (Part No.HS 8347 PT)
from
$55.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
- STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for Ford (Part No.7364)
from
$141.99
Product Features:
See More
- Head: 4.100″ Bore/0.045″ Thick/9.8cc Vol.
- Intake: 1.20″x2.00″ Port/.060″ Thick
- Exhaust: 1.25″x1.48″ Port
- 5/16″ Valve Cover
- Multi Piece Configuration
Sealed Power – Engine Valve Lifter (Part No.HT-900)
from
$9.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-2205)
from
$15.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-2271)
from
$10.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Edelbrock – Hydraulic Roller Lifter Kit for Big-Block Ford. (Part No.97453)
from
$959.99
Product Features:
See More
- Precision Self-Aligning Hydraulic Roller Lifter
- Retro-Fit Lifter
- Use w/Hyd Roller Lifter In Non-Roller Engine Block
- Originally Equipped w/Conventional Lifters
Edelbrock – Cylinder Head Gasket Set for Ford (Part No.7314)
from
$126.99
Product Features:
See More
- 4.5 in. Cylinder Bore Diameter
- 0.048 in. Thickness
- 12.5cc Volume
- Gray Color
- Two Piece Configuration
Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.520 SD)
from
$41.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.9792 PT-2)
from
$58.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26483 PT)
from
$87.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
- SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
- MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- UNIQUE COMBUSTION SEAL — Accommodates high cylinder pressures and head movement encountered with engines
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Sealed Power – Engine Rocker Arm Kit (Part No.R-855)
from
$8.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Pivot
- 1 Arm
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm Kit (Part No.R-847)
from
$8.99
Sealed Power Vintage parts provide coverage for applications over 35 years old, restoring classics with like-new performance. Leading-edge materials and ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Ball
- 1 Nut
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm (Part No.R-1096)
from
$20.99
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Rocker Arm Kit (Part No.R-879)
from
$18.79
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Pivot
- Stamped steel
- Bolt type mount
- Utilizes ISO & QS certified manufacturing
Popular 2007 Mercury Grand Marquis Valve Cover and Cylinder Heads Categories
2007 Mercury Grand Marquis Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 2007 Mercury Grand Marquis. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 14 different Valve Cover and Cylinder Heads in our inventory ranging from $10.49 to $199.99. That means you can find the exact parts or products you need to keep that 2007 Mercury Grand Marquis running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 2007 Mercury Grand Marquis. Sealed Power, Felpro, and NTK are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 2007 Mercury Grand Marquis, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 2007 Mercury Grand Marquis rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 2007 Mercury Grand Marquis Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2007 Mercury Grand Marquis demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Grand Marquis the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Felpro Valve Cover and Cylinder Heads
We carry Felpro parts in our stock across Cylinder Head Gaskets categories, plus more. For a 2007 Mercury Grand Marquis, our most popular Felpro Valve Cover and Cylinder Heads include:
Top 2007 Mercury Grand Marquis Valve Cover and Cylinder Heads from Sealed Power
Sealed Power products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 2007 Mercury Grand Marquis. Popular Sealed Power parts include:
FAQs for 2007 Mercury Grand Marquis Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 2007 Mercury Grand Marquis?
Out of 14 Valve Cover and Cylinder Heads for the 2007 Mercury Grand Marquis, the most popular in our inventory are:
from
$34.99
This product is not rated
Engine Cylinder Head Temperature Sensor
Cylinder Head Temperature Sensors
from
$33.99
This product is not rated
Engine Cylinder Head Temperature Sensor
Cylinder Head Temperature Sensors
