2007 Lexus GX470 Drivetrains

Below you will find various in-demand Lexus Drivetrains, components and accessories for your 2007 GX470. Advance Auto Parts has popular GX470 parts like Drive Shafts and Axles, Universal Joints, Differentials and more. You’ll also find aftermarket and OEM Drivetrains for other GX470 model years including 2003, 2004, 2005, 2006, 2008, 2009 and more. Select a category of 2007 Lexus GX470 Drivetrains below and start saving instantly.

Popular 2007 Lexus GX470 Drivetrains Categories

Differential Oil

U-Joints

Drive Shaft and Axles

Drive and Prop Shaft Assemblies

Differential Pinion Flanges

Differential Axle Shafts

Bearing Pullers

Drive Shaft Bearings

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Pinion Seals

Axle Vents

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Drive Shaft Repair Kits

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearing Adjusters

Front Differential Cover Gaskets

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Input Shaft Seals

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Transfer Case Actuators

Transfer Case Vents

Transfer Case Drive Gear Seals

Essential Drivetrains for 2007 Lexus GX470s

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$18.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.99

Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:

Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser

from

$7.19

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$459.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses a solid spacer to replace the crush sleeve. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. This kit fits applications with a 29 spline pinion.

Product Features:

Fits Toyota V6 rear
Included are KOYO bearings and races along with high quality seals and small parts.
Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator, thread locker, marking compound with brush, and gasket.

from

$399.99

AxleShaft

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$188.99

Bearing race driver for rear Toyota V6, Landcruiser reverse rotation, and Tacoma with locker. (TOY35028). No return.

Product Features:

Bearing race driver
Fits 35028 race
All steel construction

from

$271.99

Product Features:

Full spool
Fits Toyota V6 rear

from

$384.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Models w/ factory 3.07 & 4.88’s have a different offset and will need a new dropout when changing ratio.

Product Features:

Fits Toyota V6 rear
8.125″ ring gear diameter
29 spline pinion
10 ring gear bolts
4.88 ratio

from

$119.99

A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.

Product Features:

Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles
Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$299.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear. This kit fits applications with a 27 spline pinion.

Product Features:

Fits Toyota V6 rear
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

from

$6.99

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.29

Product Features:

Brand may vary by location

from

$6.99

Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:

Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
11mm x 1.0

from

$424.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits Toyota V6 rear
4.56 ratio
29 spline pinion
Includes conversion yoke, seal, and pinion nut

from

$11.99

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$30.99

Preload shim kit for Toyota Landcruiser. Also compatible with Toyota 8″ 4 cylinder & V6 with a solid spacer.

Product Features:

Preload shim kit
Fits 9.5″ Toyota Landcruiser

from

$11.99

Toyota 8″ & V6 gasket.

Product Features:

Dropout gasket
Fits Toyota 8″ and V6

from

$298.99

Product Features:

Cross pin shaft
Fits Toyota V6

from

$25.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$534.99

Product Features:

Fits Toyota V6 rear
Fits ABS and non-ABS applications

from

$18.99

Product Features:

Bulkhead quit connect fitting

from

$19.79

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$67.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. No side shims. This kit fits applications with a 27 spline pinion.

Product Features:

Fits Toyota V6 rear
Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.

from

$38.99

Product Features:

Side adjuster
Fits Toyota V6 and Landcruiser reverse rotation front

from

$211.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$10.99

V6 standard Open pinion gear Thrust washer.

Product Features:

Pinion gear thrust washer
Fits Toyota V6

Upgrade your 2007 Lexus GX470 with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2007 Lexus GX470, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lexus or enhancing its overall performance, Drivetrains are key to keeping your GX470 functioning at its best. At Advance Auto Parts, we offer a wide selection of 118 Drivetrains for the 2007 Lexus GX470, designed to meet your needs without breaking the bank. From Drive Shafts and Axle replacements to Universal Joints upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2007 Lexus GX470 at great prices. Our Drivetrains inventory for this model ranges from just $5.99 to $883.99, with an average price of $210.94. Our 118 Drivetrains in stock come from 18 trusted brands, so you’re sure to find the right part for your 2007 Lexus GX470 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Lexus GX470, we stock popular OEM and aftermarket Drivetrains from top names like Moog, National, Dorman, and more. Moog Drivetrains start at just $25.99 and boast an impressive 4.5 stars average rating from customers. National and Dorman also bring quality to the table, with Drivetrains available starting at $11.99, and at an average 4.3 stars rating. With 653 customer reviews and counting, our 2007 Lexus GX470 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Lexus GX470 is always ready to roll. We’re committed to providing you with everything you need to keep your GX470 in top shape, all in one place. Start shopping confidently below for your 2007 Lexus GX470!

Best-Selling Drive Shafts and Axles for 2007 Lexus GX470s

Enhance the driving experience in your Lexus with 15 quality Drive Shafts and Axle components, starting at $6.99.

show more show less

from

$11.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$154.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$22.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: – 0 Deg. F to 400 Deg. F / – 0 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$19.79

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$6.99

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$211.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$59.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$585.99

The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX front drive shaft makes the U-joints serviceable for simpler maintenance.

Product Features:

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$552.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$442.99

Built to match O.E. form, fit and function.
100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$410.99

The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance.

Product Features:

Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$123.99

Product Features:

Fits Toyota V6 rear
Conversion yoke for 29 spline gears
29 spline pinion

from

$57.99

Toyota rear inner axle seal, 03+ 4Runner,’05+Tacoma, 07-13 FJ Cruiser,Yukon Mighty seal.

Product Features:

Inner axle seal
Fits 2003 and up Toyota T100 and Tacoma

from

$7.19

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Most Popular 2007 Lexus GX470 Universal Joints

Customize your Lexus with 8 Universal Joints products like U-Joints, all priced under $76.99.

show more show less

from

$35.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$25.99

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$25.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$31.49

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$62.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$76.99

Yukon U/Joint for many Toyota applications. 2.047″ snap ring span, 1.142″ cap diameter. Inside snap ring.

from

$8.09

Universal Joint – Brute Force

from

$6.99

Universal Joint

Top Picks for 2007 Lexus GX470 Differentials

Upgrade Lexus GX470s with top-quality Differentials parts, including 88 OEM and aftermarket selections for your 2007 model.

show more show less

from

$19.99

Mobil 1 Synthetic Gear Lubricant LS 75W-90 is a supreme, multi-purpose automotive gear lubricant that helps to provide exceptional thermal stability and resistance to high temperature oxidation, extending gear life due to minimal deposits. Helps to deliver outstanding protection against low speed/high torque wear with the capability to handle severe driving conditions while delivering smooth efficient performance. Mobil 1 Synthetic Gear Lubricant LS provides exceptional shear stability, corrosion protection, and enhanced frictional properties. Compared to conventional hypoid gear lubricants, Mobil 1 LS 75W-90 performs exceptionally over a wide range of temperatures to reduce wear at start up. Mobil 1 gear lube helps to minimize leakage and reduce contamination while providing good resistance to foaming to maintain film strength for reliable lubrication. Meets or exceeds the requirements of the following industry specifications: API GL-5.

Product Features:

Mobil 1 LS synthetic automotive gear lubricant exceeds the highest level of performance requirements of modern passenger vehicles
Helps to provide exceptional thermal stability and resistance to high temperature oxidation and extend gear life due to minimal deposits
Delivers outstanding protection against low speed/high torque wear, handling severe driving conditions with smooth, efficient performance
Compared to conventional hypoid gear lubricants, performs exceptionally over a wide range of temperatures to reduce wear at start up
Provides exceptional shear stability, corrosion protection, and enhanced frictional properties
Manufacturer Part Number: 104361

from

$41.99

Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:

Better wear protection
Increased fuel efficiency
Better protection of the expensive catalytic emission system
Improved compatibility with fuels containing ethanol
Superior corrosion protection
Meets ILSAC GF-5 and Dexos1 performance requirements

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$89.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands of many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON*, DEXRON*-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$18.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

from

$14.49

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Exceptional wear protection of gears and bearings
Provides superior deposit control and protects metal surfaces from rust and corrosion
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$15.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$18.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$11.99

Toyota 8″ & V6 gasket.

Product Features:

Dropout gasket
Fits Toyota 8″ and V6

from

$59.99

V6 Toyota solid crush sleeve replacement spacer kit, preload.

Product Features:

Crush sleeve eliminator kit for Toyota V6

from

$52.99

Air line repair kit, ZIP locker.

Product Features:

Air line repair kit
Includes 20′ air line and two repair fittings

from

$39.99

8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

Product Features:

Pinion depth shim kit for Toyota 7.5″, 8″ and V6

from

$11.29

Product Features:

O-ring for seal housing
Fits Dana Spicer 44 and Toyota 8″ and V6

from

$883.99

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$271.99

Product Features:

Full spool
Fits Toyota V6 rear

Spartan Spring & Pin Kit, Fits Ford 9" & Toyota V6

from

$42.99

Spartan spring & pin kit, fits Ford 9″ & Toyota V6

Product Features:

Designed and engineered for off road performance
Chromoly drivers for added strength
Heat treated and precision cut teeth
Spartan Locker is the toughest lunchbox locker on the market

from

$29.99

20 long air line for Zip Locker.

Product Features:

Air line
20′ in length

from

$17.99

Product Features:

Pinion depth shims for Dana Spicer 60 and 70U

from

$13.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$299.99

Fits Toyota V6 rear
Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.

In-Demand Transfer Cases for 2007 Lexus GX470s

Select from 7 premium Transfer Cases parts for your 2007 Lexus GX470, with prices ranging from $8.29 to $768.99.

show more show less

from

$11.99

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.29

Product Features:

Brand may vary by location

from

$19.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$22.49

Design type: springless; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$768.99

OE Manufactured Direct Replacement Shift and Lock Actuators Control the Vehicle 2WD to 4WD, 4WD High to Low, and/or Differential Lock Function.

Product Features:

Actuators control the vehicle 2WD to 4WD, 4WD High to Low, and/or differential lock function.

from

$20.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Top-Rated Drivetrains Brands For Your 2007 Lexus GX470

Shop for the best-rated brands offering Drivetrains and other products for your 2007 Lexus GX470s. Below you’ll find some of our best rated Drivetrains from Moog, National, and Dorman, and more. Drivetrains from these brands that fit a 2007 GX470 start at just $11.99 and are rated as high as 4.5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2007 Lexus GX470 Drivetrains

When it comes to maintaining or upgrading your 2007 Lexus GX470, using quality Drivetrains is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Drivetrains, specifically designed for the 2007 Lexus GX470. With over 2 Moog brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $25.99, with an average price of just $30.99. Plus, with over 14 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $25.99

(10)

Greaseable Premium Universal Joint

“Great service and the part was perfect.”

from $35.99

(4)

Greaseable Super Strength Universal Joint

“My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”

Popular National 2007 Lexus GX470 Drivetrains

National auto parts is one of the highest quality Drivetrain brands in the market. Any 2007 Lexus GX470 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2007 GX470, Advance Auto Parts carries a full inventory of 2 National Drivetrains. Plus you will be keeping your Lexus in peak condition while saving money because prices on these National Drivetrains range from $11.99 to $89.99, plus, with more than 7 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $11.99

(5)

Multi-Purpose Seal

“Good”

from $89.99

(2)

Multi-Purpose Bearing

“Exactly what came out”

FAQs for 2007 Lexus GX470 Drivetrains

Which Drivetrains are best-sellers for 2007 Lexus GX470s?

Out of 118 Drivetrains that fit 2007 Lexus GX470s, the following parts are the top sellers:

High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (11150912) – $41.99
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (12079139) – $11.99

What’s the price range for 2007 Lexus GX470 Drivetrains?

Drivetrain prices for the 2007 Lexus GX470 start at $5.99 and go up to $883.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2007 Lexus GX470?

The average price for Drivetrains for the 2007 Lexus GX470 is $210.94. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Lexus GX470 model years?

Yes, we currently carry Drivetrains for 5 model years of Lexus GX470s between 2003 and 2009. Drivetrains are bought most frequently for the following model years: 2009, 2008, 2006, 2005, 2004, and 2003.

What are the cheapest Drivetrains for my 2007 Lexus GX470?

The cheapest 2007 Lexus GX470 Drivetrains we carry in stock are:

Pinion Nut (11642191) – $5.99
Differential Vent Breather (11661666) – $6.99
Universal Joint (18270002) – $6.99
Toyota 7.5", 8", & V6 Ring Gear Bolt Retainer Plate (11642377) – $6.99
Ring Gear Bolt (11642232) – $6.99

What are the top-rated Drivetrains that fit the 2007 Lexus GX470?

Out of 653 reviews by customers, our 2007 Lexus GX470 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2007 Lexus GX470 and their top-rated products:

Differentials
- High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (11150912) – $41.99
- Multi-Purpose Bearing (20441431) – $89.99
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
Transfer Cases
- High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (11150912) – $41.99
- Multi-Purpose Bearing (20441431) – $89.99
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
Universal Joints
- High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (11150912) – $41.99
- Multi-Purpose Bearing (20441431) – $89.99
- DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49

What types of Drivetrains do you sell for my 2007 Lexus GX470?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2007 Lexus GX470:

Can I get help with 2007 Lexus GX470 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lexus Drivetrains and more.

What is your return policy for Lexus GX470 Drivetrains?

Advance Auto Parts keeps returns simple. For new Lexus GX470 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2007 Lexus GX470 Drivetrains

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

National – Multi-Purpose Seal (Part No.710697)

Yukon Gear – Outer Oil Slinger (Part No.33025)

FAG US – Shaft Seal (Part No.SS2881)

Yukon Gear – Master Overhaul Kit For Toyota V6, ’03 & Up (Part No.14210)

Yukon Gear – AxleShaft (Part No.21899)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Bearing Race Driver (Part No.56008)

USA Standard Gear – Spool For Toyota V6 (Part No.59012)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota V6 In A 4.88 Ratio (Part No.24596)

Dorman – Differential Pinion Yoke Assembly (Part No.697-533)

Yukon Gear – Pinion Install Kit For Toyota V6 Rear Differential (Part No.13092)

Dorman – Differential Vent Breather (Part No.924-284)

Driveworks – Oil Seal (Part No.S-225875)

Yukon Gear – Ring Gear Bolt (Part No.33060)

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota V6 In A 4.56 Ratio (Part No.24650)

Dorman – Axle Differential Vent (Part No.924-262)

Yukon Gear – Solid Preload Kit For Toyota Landcruiser (Part No.55065)

Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)

Yukon Gear – Toyota V6 Cross Pin Shaft (Part No.33416)

Driveworks – Universal Joint (Part No.DW-387)

Yukon Gear – Toyota V6 Dropout Case, All New, Includes Adjusters (Part No.32095)

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

National – Tapered Roller Bearing Cone (Part No.HM88649)

Yukon Gear – Minor Install Kit For Toyota V6 And T8 Reverse Differential (Part No.12076)

Yukon Gear – V6 & L/C Reverse Drop Out Side Adjusters (Part No.33365)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170XD)

Yukon Gear – V6 Standard Open Pinion Gear Thrust Washer (Part No.33393)

National – Multi-Purpose Seal (Part No.710596)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170)

National – Multi Purpose Seal (Part No.710595)

National – Tapered Roller Bearing Cone (Part No.HM88649)

Dorman – Differential Vent Breather (Part No.924-284)

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV69170XD)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.938-791)

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-5016)

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-5017)

Dorman – 1-Piece Steel Driveshaft Assembly (OE Fix) (Part No.936-777)

Yukon Gear – Yoke For Toyota V6 Rear With 29 Spline Pinion (Part No.41206)

Yukon Gear – Rear Inner Axle Seal ’03+ 4Runner,’05+Tacoma, 07-13 FJ Cruiser (Part No.30335)

FAG US – Shaft Seal (Part No.SS2881)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.285)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.387)

Driveworks – Universal Joint (Part No.DW-387)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.287)

Spicer – Universal Joint, Greaseable Toyota Series ISR (Part No.5-1510X)

Yukon Gear – U/Joint For Many Toyota Applications (Part No.42007)

Brute Force – Universal Joint (Part No.1-1612BF)

Neapco – Universal Joint (Part No.1-1612)

Mobil 1 – 75W-90 Full Synthetic Gear Lubricant, Extends Gear Life, 1 Quart (Part No.26101)

Royal Purple – High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (Part No.51530)

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

National – Multi-Purpose Bearing (Part No.30025)

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart (Part No.889785)

Idemitsu – Type TLS-LV Automatic Transmission Fluid, 1 Quart (Part No.30040096-75000C)

National – Bearing Race (Part No.HM88610)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

National – Multi-Purpose Seal (Part No.710697)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Yukon Gear – Toyota 8" & V6 Gasket (Part No.23028)

Yukon Gear – Crush Sleeve Eliminator Kit For Toyota V6 (Part No.55053)

Yukon Gear – Air Line Repair Kit, Zip Locker (Part No.34003)

Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

USA Standard Gear – Spool For Toyota V6 (Part No.59012)

USA Standard Gear – Spartan Spring & Pin Kit, Fits Ford 9" & Toyota V6 (Part No.17045)

Yukon Gear – 20 Long Air Line For Zip Locker (Part No.34002)

Yukon Gear – Replacement Pinion Depth Shims For Dana 60, 61 & D70-U (Part No.55012)

National – Multi Purpose Seal (Part No.710823)

Yukon Gear – Pinion Install Kit For Toyota V6 Rear Differential (Part No.13092)

Dorman – Axle Differential Vent (Part No.924-262)

Driveworks – Oil Seal (Part No.S-225875)

Driveworks – Taper Bearing Cone (Part No.S-HM-88649)

National – Multi-Purpose Seal (Part No.710141)