2007 Honda CR-V Transmission Parts

Below you will find various in-demand Honda Transmission Parts, components and accessories for your 2007 CR-V. Advance Auto Parts has popular CR-V parts like Automatic Transmission Parts, Transmission Seals, Transmission Cooler and Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other CR-V model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2007 Honda CR-V Transmission Parts below and start saving instantly.

Popular 2007 Honda CR-V Transmission Parts Categories

Transmission Torque Converters

OE Transmission Coolers

Torque Strut Mounts

Transmission Solenoids

Automatic Transmission Shift Solenoids

Transmission Pan Gaskets

Automatic Transmission Drain Plugs

Transmission Mounts

Transmission Oil Pressure Switches

Transmission Oil Pan Gaskets

Transmission Dipsticks

Speed Sensors

Automatic Transmission Control Solenoid Seals

Automatic Transmission Output Shaft Seals

Automatic Transmission Oil Pump Seals

Transmission Drain Plugs

Miscellaneous Shift Shaft Seals

Transmission Seals and O-rings

Torque Converter Seals

Manual Transmission Output Shaft Seals

Shaft Seals

Miscellaneous Automatic Transmission Seals

Back Up Lamp Connectors

Transfer Case Mounts

Manual Transmission Extension Housing Seals

Manual Trans Drain Plug Gaskets

Remanufactured Automatic Transmissions

Essential Transmission Parts for 2007 Honda CR-Vs

from

$4.79

Product Features:

Brand may vary by location

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$245.74

Automatic Transmission Solenoid

from

$221.99

Shift Solenoid

from

$1.52

AT Solenoid Seal

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$6.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$26.97

Oil Drain Plug Gaske

from

$173.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Fluid Balanced

from

$8.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$12.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$79.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to ACURA 13-15; HONDA 12-16;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2012-2016
Weight approx: 2 Lbs

from

$15.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$23.29

GENERAL SEAL

from

$17.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$38.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to ACURA 94-01; HONDA 98-01;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2001
Weight approx: 1 Lbs
PART GROUP: 8824, 8893

from

$2728.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$11.49

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$10.99

This transmission drain plug is designed to match the dimensions and function of the original plug on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this transmission drain plug matches the dimensions and function of the factory hardware on specified vehicle years, makes and models
Ideal solution – this drain plug is a reliable replacement for an original part that is damaged or lost during service
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$9.49

Product Features:

Brand may vary by location

from

$6.51

AT Shift Shaft Seal

from

$6.29

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$11.49

This automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles.
Restores functionality – reliable replacement for an original dipstick that has bent or broken due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.49

Direct replacement – this transmission drain plug matches the dimensions and function of the factory hardware on specified vehicle years, makes and models
Ideal solution – this drain plug is a reliable replacement for an original part that is damaged or lost during service
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$136.61

The VEMO OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment. Developed for the anti-block braking system, wheel speed sensors send information to many on-board electronic systems. The rotational speed of the wheels is transmitted from the sensor to the control unit and from there to the transmission, engine, navigation and chassis control systems. This data is essential for ABS, ASR and ESP, to prevent blocking or wheel spin. Due to their versatile use, the sensors make a direct contribution to driving dynamics and safety. Moreover, driving comfort can be improved, fuel consumption reduced and emission levels decreased. Failure of the wheel speed sensors means an acute safety risk! The cause may be electrical or mechanical disruption, for example increased wheel bearing play, a broken wire or a corroded plug contact. With more than 670 different wheel speed sensors for vehicles of all the leading manufacturers, the quality brand VEMO offers a high-quality alternative.

Product Features:

OE quality direct fit application
Manufactured to meet or exceed OE requirements and testing
Fuel consumption reduced and emission levels decreased
Protects electronics from static discharge.
Protects electronics against moisture.
Superior filtering function of oxygen.

from

$71.71

AT Oil Pressure Swit

from

$66.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to ACURA 02-06; HONDA 02-10;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2010
Weight approx: 3 Lbs

from

$105.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to ACURA 02-06; HONDA 02-06;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2006
Weight approx: 2 Lbs

Upgrade your 2007 Honda CR-V with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2007 Honda CR-V, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Transmission Parts are key to keeping your CR-V functioning at its best. At Advance Auto Parts, we offer a wide selection of 65 Transmission Parts for the 2007 Honda CR-V, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2007 Honda CR-V at great prices. Our Transmission Parts inventory for this model ranges from just $1.52 to $2,910.99, with an average price of $147.65. Our 65 Transmission Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 2007 Honda CR-V without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Honda CR-V, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, Imperial, National, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. Imperial and National also bring quality to the table, with Transmission Parts available starting at $8.79, and at an average 4 stars rating. With 693 customer reviews and counting, our 2007 Honda CR-V Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Honda CR-V is always ready to roll. We’re committed to providing you with everything you need to keep your CR-V in top shape, all in one place. Start shopping confidently below for your 2007 Honda CR-V!

Best-Selling Automatic Transmission Parts for 2007 Honda CR-Vs

Enhance the driving experience in your Honda with 7 quality Automatic Transmission Part components, starting at $11.49.

show more show less

from

$532.07

AT Solenoid

from

$11.49

Direct replacement – this automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles.
Restores functionality – reliable replacement for an original dipstick that has bent or broken due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2910.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2857.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$221.99

Shift Solenoid

from

$184.68

AT Solenoid

from

$137.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Most Popular 2007 Honda CR-V Transmission Seals

Customize your Honda with 20 Transmission Seals products like Transmission Seals and O-rings, Automatic Transmission Output Shaft Seals, and Manual Transmission Output Shaft Seals, all priced under $23.29.

show more show less

from

$11.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$16.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$15.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$10.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$9.49

Product Features:

Brand may vary by location

from

$9.99

Product Features:

Brand may vary by location

from

$4.79

Product Features:

Brand may vary by location

from

$23.29

GENERAL SEAL

from

$16.10

Converter Housing Se

from

$11.99

SHAFT SEAL

from

$10.99

SHAFT SEAL

from

$10.99

SHAFT SEAL

from

$10.48

Drive Axle Seal

from

$9.49

SHAFT SEAL

from

$8.65

AT Output Shaft Seal

from

$7.99

SHAFT SEAL

from

$7.74

Drive Axle Seal

from

$6.51

AT Shift Shaft Seal

from

$1.52

AT Solenoid Seal

Top Picks for 2007 Honda CR-V Transmission Cooler and Parts

Upgrade Honda CR-Vs with top-quality Transmission Cooler and Parts parts, including 9 OEM and aftermarket selections for your 2007 model.

show more show less

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$59.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems

from

$54.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$39.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$52.99

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$81.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

In-Demand Transmission Mounts for 2007 Honda CR-Vs

Select from 3 premium Transmission Mounts parts for your 2007 Honda CR-V, with prices ranging from $67.99 to $103.99.

show more show less

from

$67.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Transfer Case Mount are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to HONDA 02-11;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2002-2011
Weight approx: 1 Lbs
DIFFERENTIAL MOUNT
VEHICLE REAR

from

$68.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to HONDA 07-11;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2007-2011
Weight approx: 2 Lbs

from

$103.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to HONDA 07-11;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2007-2011
Weight approx: 3 Lbs

Most Sold 2007 Honda CR-V Automatic Transmission Pan and Gaskets

Explore our best-selling Honda parts for the 2007 CR-V among 7 OEM and aftermarket options starting from $6.99.

show more show less

from

$11.49

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$19.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$12.49

Direct replacement – this transmission drain plug matches the dimensions and function of the factory hardware on specified vehicle years, makes and models
Ideal solution – this drain plug is a reliable replacement for an original part that is damaged or lost during service
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$16.99

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

Top-Rated Transmission Parts Brands For Your 2007 Honda CR-V

Shop for the best-rated brands offering Transmission Parts and other products for your 2007 Honda CR-Vs. Below you’ll find some of our best rated Transmission Parts from Permatex, Imperial, and National, and more. Transmission Parts from these brands that fit a 2007 CR-V start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2007 Honda CR-V Transmission Parts

When it comes to maintaining or upgrading your 2007 Honda CR-V, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 2007 Honda CR-V. With over 6 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $19.49. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$16.99

This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

from
$32.99

This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

from
$28.49

This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

Popular Imperial 2007 Honda CR-V Transmission Parts

Imperial auto parts is one of the highest quality Transmission Part brands in the market. Any 2007 Honda CR-V owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2007 CR-V, Advance Auto Parts carries a full inventory of 9 Imperial Transmission Parts. Plus you will be keeping your Honda in peak condition while saving money because prices on these Imperial Transmission Parts range from $39.99 to $85.99, plus, with more than 114 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$67.99

This product is not rated

High Performance Transmission Oil Cooler

“”

from
$73.99

(7)

Maxi-Kool® XL Transmission Oil Cooler

“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”

from
$85.99

(4)

High Performance Transmission Oil Cooler

“good quality,easy to install.”

FAQs for 2007 Honda CR-V Transmission Parts

Which Transmission Parts are best-sellers for 2007 Honda CR-Vs?

Out of 65 Transmission Parts that fit 2007 Honda CR-Vs, the following parts are the top sellers:

Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99
Multi Purpose Seal (18444925) – $15.99

What’s the price range for 2007 Honda CR-V Transmission Parts?

Transmission Part prices for the 2007 Honda CR-V start at $1.52 and go up to $2,910.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2007 Honda CR-V?

The average price for Transmission Parts for the 2007 Honda CR-V is $147.65. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Honda CR-V model years?

Yes, we currently carry Transmission Parts for 27 model years of Honda CR-Vs between 1997 and 2024. Transmission Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Transmission Parts for my 2007 Honda CR-V?

The cheapest 2007 Honda CR-V Transmission Parts we carry in stock are:

AT Solenoid Seal (11845784) – $1.52
Auto Transmission Manual Shaft Seal (11494069) – $4.79
Back Up Light Connector (12574307) – $6.29
Oil Seal (15440106) – $6.49
AT Shift Shaft Seal (11924506) – $6.51

What are the top-rated Transmission Parts that fit the 2007 Honda CR-V?

Out of 693 reviews by customers, our 2007 Honda CR-V Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2007 Honda CR-V and their top-rated products:

Automatic Transmission Pan and Gaskets
- Magnetic Transmission Drain plug (11908799) – $12.49
- Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99
- Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
Transmission Cooler and Parts
- Magnetic Transmission Drain plug (11908799) – $12.49
- Sensor-Safe, High Torque RTV Silicone Gasket Maker (99997948) – $6.99
- Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49

What types of Transmission Parts do you sell for my 2007 Honda CR-V?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 2007 Honda CR-V:

Can I get help with 2007 Honda CR-V Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Transmission Parts and more.

What is your return policy for Honda CR-V Transmission Parts?

Advance Auto Parts keeps returns simple. For new Honda CR-V Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2007 Honda CR-V Transmission Parts

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

Original Equipment – Automatic Transmission Solenoid (Part No.J4006131512OEA)

ATP – Shift Solenoid (Part No.HE-13)

Ishino Stone – AT Solenoid Seal (Part No.J4007337429ISH)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Driveworks – Oil Seal (Part No.S-350609)

Dorman – Oil Drain Plug Gaske (Part No.A6120831455DOR)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.HO69)

National – Multi Purpose Seal (Part No.221207)

National – Multi Purpose Seal (Part No.3459)

Anchor – Torque Strut Motor Mount: Right, 1 Piece (Part No.9796)

National – Multi Purpose Seal (Part No.712551)

FAG US – GENERAL SEAL (Part No.SS2749)

National – Multi Purpose Seal (Part No.224026)

Anchor – Engine Mount: Front Left, 1 Piece (Part No.8893)

Shift Pro by ETE – M4TA Automatic Transmission Assembly (Part No.T297003)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Dorman – Magnetic Transmission Drain Plug M18x1.50 (Part No.65406)

Driveworks – Manual Transmission Output Shaft Seal (Part No.S-712551)

Payen – AT Shift Shaft Seal (Part No.J2321947940PAY)

Carquest Premium – Back Up Light Connector (Part No.PTA2874)

Dorman – Help – Transmission Oil Dipstick: Direct Replacement, Steel (Part No.921-066)

Dorman – Magnetic Transmission Drain plug (Part No.090-178CD)

Vemo – ABS Speed Sensor, w/ iSP-foil (Part No.N6030227659VMO)

WSO – AT Oil Pressure Swit (Part No.J2200403652WSO)

Anchor – Transmission Mount: Left, 1 Piece (Part No.9433)

Anchor – Transmission Mount: Left, 1 Piece (Part No.9205)

Original Equipment – AT Solenoid (Part No.J4006308437OEA)

Dorman – Help – Transmission Oil Dipstick: Direct Replacement, Steel (Part No.921-066)

Shift Pro by ETE – MZHA Automatic Transmission Assembly (Part No.T290150)

Shift Pro by ETE – MZJA Automatic Transmission Assembly (Part No.T290160)

ATP – Shift Solenoid (Part No.HE-13)

ACKOJA – AT Solenoid (Part No.J4006254523ACK)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCA1035)

National – Multi Purpose Seal (Part No.710608)

National – Multi Purpose Seal (Part No.350609)

National – Multi Purpose Seal (Part No.712551)

National – Multi Purpose Seal (Part No.710630)

National – Multi Purpose Seal (Part No.221207)

Driveworks – Manual Transmission Output Shaft Seal (Part No.S-712551)

Driveworks – Auto Transmission Output Shaft Seal (Part No.S-710630)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

FAG US – GENERAL SEAL (Part No.SS2749)

NOK – Converter Housing Se (Part No.J5076439594NOK)

FAG US – SHAFT SEAL (Part No.SS2417)

FAG US – SHAFT SEAL (Part No.SS2615)

FAG US – SHAFT SEAL (Part No.SS4892)

NOK – Drive Axle Seal (Part No.J7043439503NOK)

FAG US – SHAFT SEAL (Part No.SS2781)

Autopart International Inc – AT Output Shaft Seal (Part No.J25572005993API)

FAG US – SHAFT SEAL (Part No.SS2111)

NOK – Drive Axle Seal (Part No.J7043110260NOK)

Payen – AT Shift Shaft Seal (Part No.J2321947940PAY)

Ishino Stone – AT Solenoid Seal (Part No.J4007337429ISH)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty (Part No.243006)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Anchor – Transfer Case Motor Mount: Rear, 1 Piece (Part No.9879)

Anchor – Torque Strut Motor Mount: Right, 1 Piece (Part No.9302)

Anchor – Transmission Mount: Left, 1 Piece (Part No.9397)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

Dorman – Magnetic Transmission Drain plug (Part No.090-178CD)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)