from

$94.06

TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:

Product Features:

Aluminium forged Control Arms
Aluminium cast Control Arms – low weight/high performance
Steel forged Control Arms
Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
Temperature resistant
Low-torque/high comfort solution
Ball stud diameters ranging from 25 to 42mm
Integral and non-integral designs Built in Bushes:
Rubber Bushes
Rubber and Metal Bushes
Hydraulic Bushes

from

$178.40

TRW Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance, and quality standards. TRW products have the best dampening characteristics with an application-tuned valve pairing longevity with superior comfort and control for vehicles in any road condition.

Product Features:

TRW micro-polished chromed piston rods have been hardened for maximum strength to provide the longest service life. Our chrome finish helps fight rust while the low-friction surface effectively prevents seal leakage.
TRW advanced seal technology uses a special NBR rubber which is highly wear resistant and can withstand temperatures to 260 degrees F, keeping oil in and contaminants out.
Engineered with low friction movement in mind, our design helps maintain the original tuning characteristics.
Our high quality valve design enables precise oil flow by using sintered metal valve construction. Tight tolerances and strength from sintered metal allow for precise tuning of compression and rebound rates that restore the original handling dynamics.
TRW working cylinders are drawn to precise dimensions and polished ultra-smooth to prevent piston band wear. Our technology permits close tuning tolerances while reducing friction and heat for the utmost endurance.
Twin-tube Design

from

$24.49

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$131.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
Springs are built with U.S. grade steel and designed to match factory ride height and performance
OE quality strut mount, bearing plate and brackets
Complete strut assembly is extensively tested for functionality and durability
Built with a micro-smooth, chrome-plated piston rod

from

$47.37

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:

Strut Mount
Bearing
Upper Spring Isolator
Lower Spring Isolator
Upper Spring Seat

from

$53.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$25.49

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$6.29

POWER STEERING FLUID

from

$22.95

The KYB shock mounting kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$102.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$46.16

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing Kit is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.
Kit includes bushings and hardware – (SEE Note)
Acoustic measurements to ensure driver comfort
Strength tests for durability
Environmental resistance tests for all weather conditions
Wear and drive tests
Assembly technique testing of all critical safety features
Dynamic testing of complete units to ensure leak free performance

from

$23.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Engineered to meet or exceed OE requirements
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$39.99

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$56.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
STRONG AND DURABLE — Engineered to match or exceed OE requirements
RESTORES RIDE — Provides revamped steering and handling feel
QUIET DRIVE — Replacement can reduce rear end noise

from

$32.33

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:

Strut Mount
Bearing
Upper Spring Isolator
Lower Spring Isolator
Upper Spring Seat

from

$24.55

The TRW Shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration. The shock absorber mounting (suspension strut support bearing) is the upper attachment/pivotal point between the shock absorber and chassis. It supports the vehicle weight, enables a steering of the spring strut and prevents the penetration of vibrations and noises into the chassis.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$36.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Reduces road noise
Reduces vibration
UV resistant

from

$43.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Reduces road noise
Reduces vibration
UV resistant

from

$116.99

Monroe® Reflex® struts feature ASD valving technology that automatically adjusts to absorb the impact, leaving the strut with greater control when it is needed. Monroe Reflex struts improve overall ride characteristics in all road conditions.

Product Features:

IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology adjusts to impacts, reducing roll and dive for vehicles with a higher center of gravity
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper helps prevent severe suspension movement (both sold separately)
LONGER SERVICE LIFE — Bronze reinforced rod guide bearing and special single lip seal combined with hardened, chrome-plated piston rod provides durability and longer service life
Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.

from

$142.90

HELP REDUCE VEHICLE ROLL AND DIVE Ideal for larger light trucks, SUVs and other vehicles with a high center of gravity: Enhanced stability by reducing body roll rate in evasive maneuvers or tight turns. Reflex shocks are application-engineered to each vehicle model. The Monroe Reflex truck shock absorber with the patented ASD Technology combines specially tuned valving with a Fluon banded piston. The ASD valve has the ability to sense acceleration to improve the handling, safety, and overall ride characteristics of sport-utility vehicles, mini-vans and light trucks. The ASD base valve will sense a bump in the road and automatically adjust the shock to absorb the impact, leaving the shock with greater control when it is needed. The features of the Monroe® Reflex® truck shock absorber make it the superior shock for improved handling, safety, and comfort in all road conditions.

Product Features:

ASD Technology – Innovative valving provides greater control for handling, while improving ride comfort.
All Weather Fluid – Contains special modifiers to reduce friction and ensure smooth rod reaction.
Full Displaced Valving – Better valving range on both the compression and extension cycles.
Fluon Banded Piston – The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
Nitrogen Gas Charged – For improved ride and handling, helps maintain tire to road contact by reducing aeration.
Hardened and Chromed Piston Rod – Long service life.
2 1/4 or 2 inch Reserve Tube – More fluid for more consistent performance.
5/8 inch Piston Rod – Heavy duty nitrocarburized rod* for long service life. (Non Dust Shield Units)
Special Seals – Self-lubricating fluid seal designed to retain gas without excessive wear or friction.

from

$499.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$15.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$23.29

Product Features:

Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$95.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.