2007 Ford Explorer Performance and Racing Products
More 2007 Ford Explorer Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 2007 Ford Explorer, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 2007 Ford Explorer Performance and Racing Products
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.16606)
from
$802.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 16606 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Driver Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16606 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16606 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)
from
$456.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
Product Features:
See More
Product Features:
- Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Full color LCD display
- High-speed data logging/monitoring
- Dual analog inputs
- Most popular vehicles supported
- Installs quickly and easily
- Easy restoration back to stock
- User adjustable vehicle parameters
- USB Interface cable included
- Product might not be available in all states due to local laws.
SCT Performance – Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (Part No.40490)
from
$456.99
The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.
Product Features:
See More
Product Features:
- Monitor and display vehicle data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease
- Product might not be available in all states due to local laws.
Flowmaster Inc. – 50 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, Non-Reversible, Moderate Sound (Part No.52557)
from
$185.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)
from
$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)
from
$154.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.842451)
from
$175.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)
from
$176.99
Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.
Product Features:
See More
Product Features:
- Easily install two DIS-4 Ignitions on late model Ford Engines
- Easy Connections w/No Splicing Or Cutting Into Factory Wiring
- Wiring the system will take only an hour
- Multiple direct plug in connectors
- Wiring the system will only take and hour
MSD Ignition – Coil; Ford DIS Coil Pack; 4 Tower; Stock (Part No.8241)
from
$117.99
Designed to be used with late model Ford waste spark ignition systems. 83:1 turns ratio and lower primary resistance produce high voltage output. Secondary towers designed for snap on spark plug terminals. Primary terminals require Ford style connector. Carb O.E. approved.
Product Features:
See More
Product Features:
- Designed to use w/late model Ford waste spark ignition systems
- 83:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Secondary towers designed for snap on spark plug terminals
- Primary terminals require Ford style connector
MSD Ignition – Ford 4.6/5.4L 3-Valve 8-Pack Ignition Coils – Red (Part No.82438)
from
$370.99
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.
Product Features:
See More
Product Features:
- Fits 2005-2009 4.6L/5.4L SOHC 3V
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- CARB approved legal for use in all states
- Comes in an package of 8
MSD Ignition – Coils; Ford 4.6/5.4L 2-Valve 98-14 8-Pack (Part No.82428)
from
$259.99
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.
Product Features:
See More
Product Features:
- Fits 1999-2004 4.6L/5.4L SOHC 2V
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Fram – High Perf. Full-Flow Lube Spin-on (Part No.HP1)
from
$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.**
Product Features:
See More
Product Features:
- Proven protection for up to 10,000 miles
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
Motive Gear – Performance Differential Ring and Pinion (Part No.F888488)
Motive Gear – Performance Differential Ring and Pinion (Part No.F888430)
Richmond Gear – RngPnn (Part No.69-0312-1)
from
$350.99
RngPnn
Motive Gear – Performance Differential Ring and Pinion (Part No.F888514)
Richmond Gear – MiniSpool (Part No.78-8831-1)
from
$151.99
MiniSpool
Motive Gear – Differential Mini Spool (Part No.MS88-28)
Hays – Performance; Flywheel (Part No.22-835)
from
$548.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Popular 2007 Ford Explorer Performance and Racing Products Categories
2007 Ford Explorer Performance and Racing Products
You count on your 2007 Ford Explorer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 17 Performance and Racing Products ranging in price from $17.99 to $802.99, you’re sure to find everything you need for your 2007 Ford Explorer.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 10 different brands like K&N, SCT Performance, and MSD Ignition. 2007 Ford Explorer Performance and Racing Products start as low as $17.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 645 extensive product reviews on 2007 Ford Explorer Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Ford 4.6/5.4L 3-Valve 8-Pack Ignition Coils – Red with 3.4 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2007 Ford Explorer below to get started!
Top-Rated Performance and Racing Products Brands For Your 2007 Ford Explorer
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2007 Ford Explorer running right for years to come. In our inventory you’ll find brands like K&N, SCT Performance, MSD Ignition, and even more.
Popular Flowmaster Inc. Performance and Racing Products
You’ll find popular Flowmaster Inc. brand products across Performance Exhaust Products. All are waiting to get your 2007 Ford Explorer back on the road. Some of the top-rated Flowmaster Inc. products in these categories are:
from
$133.99
(1)
40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
Top-Rated Performance and Racing Products
If are what you’re looking for, our inventory holds plenty. We stock brand Performance and Racing Products for your 2007 Ford Explorer, and some of our most reviewed parts include:
from
$17.99
(99)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
FAQs for 2007 Ford Explorer Performance and Racing Products
What are the most purchased Performance and Racing Products for the 2007 Ford Explorer?
Out of 17 Performance and Racing Products for the 2007 Ford Explorer, the most popular in our inventory are:
from
$456.99
(1)
Preloaded Performance Programmer for Increased Horsepower & Torque
Computer Chip Programmers
from
$469.99
(9)
50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics
Performance Computer Prom and Chips
from
$123.99
This product is not rated
40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
What are the top-rated 2007 Ford Explorer Performance and Racing Products?
Top-rated Performance and Racing Products for your 2007 Ford Explorer based on customer reviews/ratings are:
