2007 Ford Explorer Drivetrains
More 2007 Ford Explorer Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2007 Ford Explorer, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2007 Ford Explorer Drivetrains
Powertrax – Grip PRO Traction System (Part No.GT443527)
from
$526.69
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Motive Gear – Differential Mini Spool (Part No.MS88-31)
Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)
from
$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.
Product Features:
See More
Product Features:
- Side gear thrust washer for Ford 8.8″
- 0.875″ diameter cross pin shaft applications only
Yukon Gear – Zip Locker Install Kit (Part No.34026)
from
$249.99
Product Features:
See More
- Installation kit
- Includes o-ring for bulkhead fitting, bulkhead fitting, outer fitting, switch, front and rear switch cover, solenoid, zip ties and 20′ air line
Dorman – Transfer Case Shift Motor (Part No.600-800)
from
$113.99
Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
- Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
- 100% new – this transfer case motor is entirely new, not remanufactured like competitors
- Quality assured – vehicle-specific application has been validation tested to ensure quality
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Yoke For Ford 8.8" Truck U/Joint Size (5" Od) (Part No.41050)
from
$221.99
Yukon yoke for Ford 8.8″ truck U/joint size (5″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- 30 spline
- Round companion flange
- 5.00″ O.D.
Yukon Gear – Pinion Install Kit For Ford 8.8" Differential (Part No.13041)
from
$167.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 2009 and down Ford 8.8″
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-507)
from
$48.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles
- Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Pro-King – Differential Axle Seal (Part No.762C074)
from
$109.99
Pro-King High Quality Differential Products are designed for trouble free installation and setup.
See More
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Pro-King – Differential Internal Nest Kit (Part No.762B717)
from
$239.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Stub Axle Bearing For Ford 7.5" IRS, 8.8" IRS & 8.8" IFS (Part No.18055)
Yukon Gear – 8.8" Ford Cover Gasket (Part No.23011)
Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)
from
$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.
Product Features:
See More
Product Features:
- 35 spline
- 8 x 3.96″ bolt pattern
- Cut to length design fits 40″-43.5″ applications
- Fits Dana Spicer 60, 70 and 80
Yukon Gear – Mini Spool For Ford 8.8" With 31 Spline Axles (Part No.32226)
from
$194.99
Mini Spool for Ford 8.8″ with 31 spline axles and 7/8″ cross pin. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″ with 31 spline axles
- Provides 100% traction to both wheels at all times
- Installs into standard open carrier case
Dorman – Split CV Boot – With Quick Drying Adhesive (Part No.614-700)
from
$42.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Chrome Cover For 8.8" Ford (Part No.32009)
Motive Gear – Performance Differential Ring and Pinion (Part No.F888355)
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.371)
from
$24.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV11109)
from
$103.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
National – Multi Purpose Seal (Part No.710403)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.SCH-1310)
from
$17.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Differential Clutch Kit (Part No.697-780)
from
$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
- Quality materials – all components are built for reliable longevity and performance
- Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – Set Up Bearing (Part No.56045)
from
$153.99
M802048 set-up bearing (one bearing). No return.
Product Features:
See More
Product Features:
- Set up bearing
- Fits M802048 pinion bearing
- Easily slips on and off pinion journal to allow for easier pinion depth adjustment
SKF – Diff. Side Cover Sea (Part No.J7041325694SKF)
from
$19.60
Diff. Side Cover Sea
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
Yukon Gear – Replacement Outer Oil Slinger For Dana 25, 27, 30, 44 & 50 (Part No.33011)
Popular 2007 Ford Explorer Drivetrains Categories
2007 Ford Explorer Drivetrains
You count on your 2007 Ford Explorer to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 248 Drivetrains ranging in price from $0.99 to $1,822.99, you’re sure to find everything you need for your 2007 Ford Explorer.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 26 different brands like Moog, Valvoline, and Driveworks. 2007 Ford Explorer Drivetrains start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 8,889 extensive product reviews on 2007 Ford Explorer Drivetrains. Some of the top-rated Drivetrains products we carry are C.V. Joint Solvent Welded Split Boot Kit Outer with 2.5 stars and Universal Joint with 4.4 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2007 Ford Explorer below to get started!
Top-Rated Drivetrains Brands For Your 2007 Ford Explorer
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2007 Ford Explorer running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2007 Ford Explorer back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2007 Ford Explorer Drivetrains
What are the most purchased Drivetrains for the 2007 Ford Explorer?
Out of 248 Drivetrains for the 2007 Ford Explorer, the most popular in our inventory are:
What are the top-rated 2007 Ford Explorer Drivetrains?
Top-rated Drivetrains for your 2007 Ford Explorer based on customer reviews/ratings are:
from
$21.99
(88)
C.V. Joint Solvent Welded Split Boot Kit Outer
“This kit was easily installed and solved my problem”
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
