2007 Ford E-250 Performance and Racing Products

Essential 2007 Ford E-250 Performance and Racing Products

SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)

Preloaded Performance Programmer for Increased Horsepower & Torque

from

$456.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

Product Features:
  • Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
  • Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
  • Reads and clears DTC (Diagnostic Trouble Codes) with ease.
  • Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
  • Full color LCD display
  • High-speed data logging/monitoring
  • Dual analog inputs
  • Most popular vehicles supported
  • Installs quickly and easily
  • Easy restoration back to stock
  • User adjustable vehicle parameters
  • USB Interface cable included
  • Product might not be available in all states due to local laws.
See More

Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)

50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics

from

$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.

Product Features:
  • HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
  • MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
  • CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
  • Reads and Erases Diagnostic Trouble Codes
  • Display Over 15 Vehicle Parameters
  • Installation Is Easy-10-20 Minutes
  • Free Internet Updates And Upgrades
  • 30 Day Money Back Guarantee
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-0945)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$89.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable and engineered to last for the entire lifespan of your vehicle. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
  • REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
  • EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
See More

Hays – Flywheels (Part No.12-071)

Flywheels

from

$163.99
Flywheels

Hays – Performance; Flywheel (Part No.22-835)

Performance; Flywheel

from

$548.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More

K&N – Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter (Part No.77-2570KTK)

Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter

from

$399.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1343)

Lower Intake Manifold Gasket Set: 2 Piece Set

from

$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

FEL-PRO Performance – Upper Intake Manifold (Plenum) Gasket Set: 2 Piece Set (Part No.1236)

Upper Intake Manifold (Plenum) Gasket Set: 2 Piece Set

from

$40.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
  • Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
  • 5.4L Cobra R; Upper intake
  • Not intended for use in emission controlled vehicles.
See More

MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)

Harness; Ford 4.6L Modular to DIS-4 Ignition

from

$176.99
Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.

Product Features:
  • Easily install two DIS-4 Ignitions on late model Ford Engines
  • Easy Connections w/No Splicing Or Cutting Into Factory Wiring
  • Wiring the system will take only an hour
  • Multiple direct plug in connectors
  • Wiring the system will only take and hour
See More

MSD Ignition – Coils; Ford 4.6/5.4L 2-Valve 98-14 8-Pack (Part No.82428)

Coils; Ford 4.6/5.4L 2-Valve 98-14 8-Pack

from

$259.99
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.

Product Features:
  • Fits 1999-2004 4.6L/5.4L SOHC 2V
  • Improved Spark Energy And Voltage Output
  • Patented Winding Design and Materials
  • Direct Bolt-In to Factory Connectors
See More

MSD Ignition – Ford 4.6/5.4L 3-Valve 8-Pack Ignition Coils – Red (Part No.82438)

Ford 4.6/5.4L 3-Valve 8-Pack Ignition Coils - Red

from

$370.99
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.

Product Features:
  • Fits 2005-2009 4.6L/5.4L SOHC 3V
  • Improved Spark Energy And Voltage Output
  • Patented Winding Design and Materials
  • Direct Bolt-In to Factory Connectors
  • CARB approved legal for use in all states
  • Comes in an package of 8
See More

Richmond Gear – Differential Ring And Pinion (Part No.69-0057-1)

Differential Ring And Pinion

from

$379.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

2007 Ford E-250 Performance and Racing Products

You count on your 2007 Ford E-250 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 14 Performance and Racing Products ranging in price from $17.99 to $548.99, you’re sure to find everything you need for your 2007 Ford E-250.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 8 different brands like K&N, MSD Ignition, and SCT Performance. 2007 Ford E-250 Performance and Racing Products start as low as $17.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 417 extensive product reviews on 2007 Ford E-250 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Ford 4.6/5.4L 3-Valve 8-Pack Ignition Coils – Red with 3.4 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2007 Ford E-250 below to get started!

Top-Rated Performance and Racing Products Brands For Your 2007 Ford E-250

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2007 Ford E-250 running right for years to come. In our inventory you’ll find brands like K&N, MSD Ignition, SCT Performance, and even more.

Popular K&N Performance and Racing Products

You’ll find popular K&N brand products across Performance Air Filters and Performance Air Intake Kits. All are waiting to get your 2007 Ford E-250 back on the road. Some of the top-rated K&N products in these categories are:
Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter
from $399.99
(10)
Cold Air Intake: Adds Up To 17 Horsepower, With Million Mile Air Filter
Performance Air Intake Kits

FAQs for 2007 Ford E-250 Performance and Racing Products

What are the most purchased Performance and Racing Products for the 2007 Ford E-250?

Out of 14 Performance and Racing Products for the 2007 Ford E-250, the most popular in our inventory are:
Coils; Ford 4.6/5.4L 2-Valve 98-14 8-Pack
from $259.99
(8)
Coils; Ford 4.6/5.4L 2-Valve 98-14 8-Pack
Performance Coils
Preloaded Performance Programmer for Increased Horsepower & Torque
from $456.99
(1)
Preloaded Performance Programmer for Increased Horsepower & Torque
Computer Chip Programmers
50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics
from $469.99
(9)
50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics
Performance Computer Prom and Chips

What are the top-rated 2007 Ford E-250 Performance and Racing Products?

Top-rated Performance and Racing Products for your 2007 Ford E-250 based on customer reviews/ratings are:
Ford 4.6/5.4L 3-Valve 8-Pack Ignition Coils - Red
from $370.99
(5)
Ford 4.6/5.4L 3-Valve 8-Pack Ignition Coils – Red
“Great price and service.”