2007 Dodge Ram 3500 Fuel and Emissions Systems

Name: Air Charge Temperature Sensor
Brand: Carquest Premium
SKU: WTA1087
Price: 26.99 USD

Below you will find various in-demand Dodge Fuel and Emissions Systems, components and accessories for your 2007 Ram 3500. Advance Auto Parts has popular Ram 3500 parts like Air Flow Sensors, Gas Caps, Fuel Injectors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Ram 3500 model years including 1998, 2000, 2003, 2004, 2005, 2006, 2008, 2009, 2010 and more. Select a category of 2007 Dodge Ram 3500 Fuel and Emissions Systems below and start saving instantly.

Popular 2007 Dodge Ram 3500 Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Air Flow Meters and Mass Air

EGR Pressure Feedback Sensors

Gas Caps

Diesel Particulate Filters

Fuel Pumps

Oxygen Sensors

Vapor Canister Purge Valves

Diesel Fuel Injector Connector Tubes

Fuel Injection Pumps

Fuel Injection Pressure Sensors

EGR System Service Kits

Fuel Vapor Leak Detection Pumps

MAP-Barometric Pressures

Manifold Air Pressure Sensors

Canister Purge Solenoids

Diesel Oxidation Catalysts

Fuel Injection Fuel Rail Pressure Sensors

EGR Valves

Fuel Injectors

Vapor Canisters

Fuel Injection Fuel Feed Pipes

Injection Pressure Regulating Valves

Pressure Regulators

Air Charge Temperature Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

EGR Lines

Fuel Tank Lock Rings

Fuel Tank Filler Necks

EGR Tube Seals

Fuel Injector Connectors

Fuel Injection Nozzle O-Rings

Mass Air Flow Sensor Connectors

Fuel Injection Fuel Rails

Diesel Fuel Injector Lines

Exhaust Gas Differential Pressure Sensors

Fuel Pump Tank Seals

Oxygen Sensor Connectors

Fuel Injector O-rings

EGR Valve Gaskets

EGR Gasket Sets

EGR Valve Temperature Sensors

Evaporative Emissions System Leak Detection Pump Seals

Fuel Injection Nozzle O-Ring Kits

Fuel Injector Set

Fuel Cap Tester Adapters

Exhaust Gas Recirculation (EGR) Cooler Seals

Essential Fuel and Emissions Systems for 2007 Dodge Ram 3500s

from

$26.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$78.99

A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part.
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank.
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

from

$59.71

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$31.99

Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.

Product Features:

Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system.
Quality construction – manufactured from premium materials for a long service life.
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$127.17

Forecast Manifold Absolute Pressure/Manifold Air Temperature Sensors are designed to perform in harsh environments such as extreme temperatures and vibration, thermal and mechanical shock.

Product Features:

Designed for under-hood environments
All-silicon, solid-state microelectronic technology
Temperature compensation
Electromagnetic interference (EMI) protection
Air temperature output

from

$2175.99

This diesel particulate filter (DPF) is designed to match the fit and function of the original filter on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this diesel particulate filter (DPF) is designed to match the fit and function of the original filter on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to clogging.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$74.99

New Standard Replacement Fuel Tank Strap Kit, 35 1/2 Inch And 28 Inch Straps, Pair

Product Features:

35 1/2 Inch And 28 Inch Straps
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$105.99

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$2.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$134.99

This exhaust gas recirculation (EGR) line is designed to match the fit of an original EGR line on specified vehicles. It is engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve.

Product Features:

Direct replacement – this exhaust gas recirculation line is designed to match the fit and function of the original equipment EGR line.
Ideal solution – engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$39.99

This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles.
Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service.
Durable construction – recommended for replacement when the fuel pump or sensor is replaced
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$212.99

This EGR system service kit includes the necessary gaskets, seals and O-rings to complete the filter service. The components are designed to match the fit of the original parts on specified vehicles.

Product Features:

Direct replacements – components in this exhaust gas recirculation (EGR) system service kit are designed to match the function of the original parts on specified vehicles.
Ideal solution – engineered to reliably replace EGR components that are damaged or due for service.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$21.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$1771.00

This diesel fuel injection pump has been thoroughly remanufactured using an exclusive process to ensure optimum quality and reliability. Critical components are replaced and clearances are verified after cleaning, reassembly and testing.

Product Features:

Ideal replacement – this remanufactured diesel fuel injection pump restores lost performance from a worn original equipment injection pump.
Thoroughly remanufactured – this fuel injector pump has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free.
Quality tested – this part has undergone calibration to application-specific requirement and tested to ensure performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$14.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$461.99

This fuel injection fuel rail pressure sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel injection fuel rail pressure sensor is designed to match the fit and function of the original sensor on specified vehicles.
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$1361.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
End of line testing using the exact OE test specifications.
Guaranteed to provide OE performance and meet all emission specifications.
Continuous improvement, manufactured with the latest upgrades to components and specifications.

from

$517.39

Dorman’s Fuel Pressure Sensor effectively measures fuel pressure in the fuel rail, alerting both the EVAP system and the fuel system to leaks. Replacement restores engine performance.

Product Features:

Stops and prevents rough idling
Replacement shuts off the “check engine” light
Restores fuel efficiency
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

from

$290.99

This DPF differential pressure sensor is designed to match the fit and function of the original part on specified makes, years and models, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this replacement exhaust gas differential pressure sensor, also known as a diesel particulate filter (DPF) sensor, is designed to match the fit and function of the original sensor on specified makes, years and models.
Restores functionality – reliable replacement for an original sensor that has broken, burned out, corroded or otherwise stopped working.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$77.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$10.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$87.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$146.99

This evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this evaporative emissions system leak detection pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original part that has clogged or failed due to emissions control system damage.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

The leak detection pump is an integral piece of the evaporative emission control system providing EVAP system monitoring for system leakage detection. The seal allows for service of common system component failure.

from

$42.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$32.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$627.99

Exhaust Gas Recirculation (EGR) Valve Temperature Sensor

Upgrade your 2007 Dodge Ram 3500 with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2007 Dodge Ram 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Ram 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 154 Fuel and Emissions Systems for the 2007 Dodge Ram 3500, designed to meet your needs without breaking the bank. From Air Flow Sensor replacements to Gas Caps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2007 Dodge Ram 3500 at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.99 to $3,227.99, with an average price of $227.61. Our 154 Fuel and Emissions Systems in stock come from 21 trusted brands, so you’re sure to find the right part for your 2007 Dodge Ram 3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Dodge Ram 3500, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO, NTK, Carquest Premium, and more. FELPRO Fuel and Emissions Systems start at just $1.99 and boast an impressive 5 stars average rating from customers. NTK and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $5.99, and at an average 5 stars rating. With 5,264 customer reviews and counting, our 2007 Dodge Ram 3500 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Dodge Ram 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your Ram 3500 in top shape, all in one place. Start shopping confidently below for your 2007 Dodge Ram 3500!

Best-Selling Air Flow Sensors for 2007 Dodge Ram 3500s

Enhance the driving experience in your Dodge with 16 quality Air Flow Sensor components, starting at $16.79.

show more show less

from

$39.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$42.99

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$26.99

NTK’s Ambient Air Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper reading of outside air temperature.
The Ambient Air Temperature Sensor measures outside air temperature and is used by the heating and cooling control system, along with other vehicle cabin sensors, to control temperature and blower speed.

from

$27.99

NTK’s Air Charge Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper monitoring of air temperature entering the engine.
The Air Charge Temperature Sensor is used by the Engine Control Unit (ECU) to measure air density for fuel mixture control, which allows it to make continuous adjustments to the engine’s air / fuel mixture for maximum fuel efficiency.

from

$24.99

from

$70.90

NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$79.99

CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:

Lifecycle tested to meet or exceed OE specifications
Direct OE replacement
High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
Global coverage for import and/or domestic applications.

from

$80.36

Oxygen Sensor

from

$182.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$59.71

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$135.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$115.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$54.23

Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.

Product Features:

Improved Engine Response and Performance
Lower Emissions
Improved Fuel Economy
Longer Sensor Life
Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install

from

$28.99

Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.

Product Features:

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$22.29

The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

Top Picks for 2007 Dodge Ram 3500 Fuel Injectors

Upgrade Dodge Ram 3500s with top-quality Fuel Injectors parts, including 35 OEM and aftermarket selections for your 2007 model.

show more show less

from

$464.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
State-of-the-art designs that meet or exceed OE specifications
Top-of-the-line quality and performance
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$14.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$17.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Each gasket set is built to meet or exceed all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$32.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$57.99

This fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel injection fuel feed pipe is designed to match the fit and function of the original pipe on specified applications.
Restores functionality – reliable replacement for an original part that has failed due to heat or vibration.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$139.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$26.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.99

Complete injector seal kit includes all necessary components to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.

Product Features:

Premium OE quality materials
Includes injector body o-ring
Includes copper combustion seal
Fuel inlet tube o-ring

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$188.99

Continental mass air flow sensors, or MAFS, are the genuine OEM part. Continental sensors are made and manufactured to the highest quality and original equipment specifications. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. MAFS are essential in optimizing fuel economy and ensure your vehicle is running at peak performance and efficiency.

from

$148.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
End of line testing using the exact OE test specifications.
Guaranteed to provide OE performance and meet all emission specifications.
Continuous improvement, remanufactured with the latest upgrades to components and specifications.

from

$369.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. CARQUEST Premium Cummins 5.9L injectors are updated to the latest design revision to reduce failure modes that are common with the original design. Each injector is 100% tested on a sophisticated automated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Includes 100% new nozzle to ensure precise fuel delivery under all operating parameters
Includes 100% new stator solenoid to ensure precise fuel injection timing
Includes 100% new control valve to improve longevity over competitive units
Includes copper combustion seal
Includes fuel inlet tube O-ring
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$44.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$38.99

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles.
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$539.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$432.99

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated automated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Includes 100% new nozzle to ensure precise fuel delivery under all operating parameters
Includes copper combustion seal
Includes fuel inlet tube O-ring
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$371.99

This fuel pressure regulator is engineered to match the function of the original equipment regulator on specified vehicles. It is engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning.

Product Features:

Direct replacement – this fuel pressure regulator is designed to match the fit and function of the original equipment regulator on specified vehicle.
Ideal solution – engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$152.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.

Product Features:

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.
End of line testing using the exact OE test specifications.
Guaranteed to provide OE performance and meet all emission specifications.
Continuous improvement, manufactured with the latest upgrades to components and specifications.

from

$1598.99

Carquest premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Carquest Premium Cummins 5.9L injectors are updated to the latest design revision to reduce failure modes that are common with the original design. Each injector is 100% tested on a sophisticated automated flow bench under multiple operating parameters to meet or exceed OE specifications. This Carquest six-pack includes six premium injectors and six fuel inlet tubes, which should be replaced any time the injector is serviced or replaced to reduce potential injector failure from contamination. The upgraded design of the fuel inlet tube includes several features such as a larger sealing surface to improve sealing between the fuel injector and inlet tube, an integrated edge filter and improved alignment pin.

Product Features:

Includes six premium injectors and six fuel inlet tubes
Includes 100% new nozzle to ensure precise fuel delivery under all operating parameters
Includes 100% new stator solenoid to ensure precise fuel injection timing
Includes 100% new control valve to improve longevity over competitive units
Includes copper combustion seal
Includes fuel inlet tube o-ring
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$640.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$481.99

Bosch is the leading OE supplier of diesel fuel systems for diesel passenger cars, SUVs, van and pickup trucks.End of line testing using the exact OE test specifications.Guaranteed to provide OE performance and meet all emission specifications.Continuous improvement, manufactured with the latest upgrades to components and specifications. Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, And Asian vehicles.

Product Features:

100% of injectors are end of line tested using the exact OE test specifications and equipment
Manufactured with the latest OE updates, so they can often be superior to the parts they replace
Manufactured using all OE tools and processes
Guaranteed to provide OE performance

from

$465.99

100% of injectors are end of line tested using the exact OE test specifications and equipment
Manufactured with the latest OE updates, so they can often be superior to the parts they replace
Manufactured using all OE tools and processes
Guaranteed to provide OE performance

from

$445.99

Includes 100% new nozzle to ensure precise fuel delivery under all operating parameters
Includes copper combustion seal
Includes fuel inlet tube O-ring
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$437.99

100% of injectors are end of line tested using the exact OE test specifications and equipment
Manufactured with the latest OE updates, so they can often be superior to the parts they replace
Manufactured using all OE tools and processes
Guaranteed to provide OE performance

from

$389.99

This common rail diesel fuel injector has been thoroughly remanufactured using an exclusive process to ensure optimum quality and reliability. Critical components are replaced and clearances are verified after cleaning, reassembly and testing.

Product Features:

Ideal replacement – this remanufactured common rail diesel fuel injector restores lost performance from a fouled original equipment injector
Thoroughly remanufactured – this fuel injector has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$329.99

Ideal replacement – this remanufactured common rail diesel fuel injector restores lost performance from a fouled original equipment injector
Thoroughly remanufactured – this fuel injector has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$321.99

Encore Automotive Genuine OE Air Flow Meter measures the precise amount of air and communicates with the Engine Control Unit (ECU) for the ideal amount of fuel injection. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.

Product Features:

Genuine OE Part
Highly accurate sensing elements that respond quickly to airflow changes for an efficient air/fuel mixture
No moving parts

from

$254.99

Direct replacement – this fuel pressure regulator is designed to match the fit and function of the original equipment regulator on specified vehicle.
Ideal solution – engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$44.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$37.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$12.82

Fuel Injector O-Ring

from

$10.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$8.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

In-Demand Oxygen Sensors for 2007 Dodge Ram 3500s

Select from 9 premium Oxygen Sensors parts for your 2007 Dodge Ram 3500, with prices ranging from $37.99 to $151.66.

show more show less

from

$37.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$54.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$48.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$79.99

Advanced Wideband sensing element for exact air/fuel measurement
Robust sensor design increases sensor longevity
Seared protection tube due to 100% functional quality test
True Direct-fit
Pre-coated threads with anti-seize compound right out of the box

from

$63.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$74.99

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$59.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$151.66

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$63.99

Most Sold 2007 Dodge Ram 3500 Fuel Pumps

Explore our best-selling Dodge parts for the 2007 Ram 3500 among 27 OEM and aftermarket options starting from $36.99.

show more show less

from

$244.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$172.99

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$173.99

Product Features:

All CARQUEST fuel pumps are designed to meet or exceed OE specs and are 100% tested to ensure performance and long-life.
High-efficiency turbine technology provides quiet and precise fuel delivery
Carbon commutator technology provides improved durability and robust performance for gasoline and flexible fuel
CARQUEST Fuel Pump has modified return porting to increase flow resulting in lower failure rates. Upgraded convoluted tubing improves durability to resist tube wear failure and create longer life.
CARQUEST strainer uses polyester material to ensure filtration performance meet or exceed OE requirements.

from

$36.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$227.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$172.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$161.99

Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$161.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$262.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$797.99

CARQUEST premium remanufactured high-pressure fuel pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Includes pump mounted regulator

from

$262.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$1744.99

Each unit is 100% tested to OE specifications
Includes pump mounted regulator

from

$1895.99

CARDONE Remanufactured Fuel Injection Pumps are application specific pumps that expand across a variety of platforms. Our diesel injector pumps are precision wound with trimmed solenoid windings to ensure accurate and precise delivery of fuel from the electronic control module (ECU). This allows for smooth engine operation, improved fuel consumption, reduced harmful emissions, instant throttle response, and optimal fuel atomization, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$1515.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% end of line tested to OE specifications in our ISO facility
100% nozzle replacement means improved durability
100% O-ring replacement
100% wiring harness replacement results in reliable connections
All Delphi injection pumps are tested utilizing OE methodologies
All parts used in the rebuild process are Delphi validated
Part completely disassembled, inspected, components replaced, unit reassembled.

from

$1301.14

Bosch High Pressure Pumps come standard on the majority of diesel vehicles, providing superior performance and durability.

Product Features:

Built with Bosch OE components
End of line testing using the exact OE test specifications
Guaranteed to provide OE performance and meet all emission specifications

from

$1214.99

The diesel fuel in your truck contains contaminants dirt, water and air/vapor which is reducing power and damaging your diesel fuel injectors. aFe’s POWER DFS780 Diesel Fuel System, with its patent-pending design, is capable of removing power-robbing debris such as air, water and other contaminants. The DFS780 also boosts fuel pressure ensuring constant availability for the high-pressure pump, improving throttle response and horsepower at all RPMs.

Product Features:

Clear High Impact Polycarbonate Sight Glass
Helical Spur Gears Runs Quieter That Straight Cut Gears
Marine Grade Motor Protects Against Dust And Water
Contoured CNC Manifold Enhances Flow

from

$1091.99

100% of pumps are end of line tested using the exact OE test specifications and equipment
Manufactured with the latest OE updates, so they can often be superior to the parts they replace
Manufactured using all OE tools and processes
Guaranteed to provide OE performance

from

$841.99

100% of pumps are end of line tested using the exact OE test specifications and equipment
Remanufactured pumps include all OE updates, so they can often be superior to the OE pumps that they replace
Manufactured using all OE tools and processes
Remanufactured Pumps receive new OE parts for all wearable or critical components

from

$679.99

Ideal replacement – this remanufactured common rail fuel injection pump restores lost performance from a worn original equipment injection pump
Thoroughly remanufactured – this fuel injector pump has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free
Quality tested – this part has undergone calibration to application-specific requirement and tested to ensure performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$679.99

This diesel fuel injection pump is a direct replacement for the original equipment injection pump and has been remanufactured to stringent industry standards for optimum performance and efficiency.

Product Features:

Direct replacement – this diesel fuel injection pump matches the fit and functionality of the original equipment injection pump
Durable construction – this injection pump is remanufactured from quality materials for durability
Cost-effective dealer alternative – offers original manufacturer quality at lower cost than a dealer replacement
Quality tested – this diesel fuel injection pump has been tested for quality and fit for this vehicle application

from

$568.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$463.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$428.26

Fuel modules are designed to provide uninterrupted flow of fuel to the engine at system pressure. Depending on customer needs, the Delphi Series 7000 Fuel Module can integrate a pump, fuel level sensor, fuel filter, reservoir with active and passive filling mechanisms, and regulator in a compact, modular package that is easy to install. The Delphi Series 7000 Fuel Module also offers an in-tank fuel filter with 10-12 µm filtration. The Delphi Series 7000 Fuel Module provides superior low fuel handling and fuel level sensing performance with its enhanced bottom reference design. It also offers reduced noise levels and improved pump durability compared to conventional fuel modules. The simplicity of design also results in lower cost. This module is targeted to meet California ZEV requirements.

Product Features:

Acetal cover can accommodate 116mm tank opening to permit integrated filter in reservoir
Single stage turbine pump provides quiet, energy efficient operation
Active reservoir-fill mechanism (high pressure jet pump) to maintain fuel supply in reservoir
Passive reservoir fill mechanism helps fill the reservoir at low-fuel volumes
High capacity filter media helps supply clean fuel to the injection system
Available serviceable in-tank fuel filter for markets with poor quality fuels

from

$370.19

CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Triple barb hose fitting provides superior, long-lasting seal
Superior return porting for optimum fuel flow
Enhanced pump to flange harness design provides worry-free electrical performance
Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
Gradient density, dual zone filtration designed for better contamination resistance

from

$219.99

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Triple barb hose fitting provides superior, long-lasting seal
Superior return porting for optimum fuel flow
Enhanced pump to flange harness design provides worry-free electrical performance
Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
Gradient density, dual zone filtration designed for better contamination resistance

from

$185.99

Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
Triple barb hose fitting provides superior, long-lasting seal
Superior return porting for optimum fuel flow
Enhanced pump to flange harness design provides worry-free electrical performance
Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
Gradient density, dual zone filtration designed for better contamination resistance

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Top-Rated Fuel and Emissions Systems Brands For Your 2007 Dodge Ram 3500

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2007 Dodge Ram 3500s. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, NTK, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2007 Ram 3500 start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2007 Dodge Ram 3500 Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2007 Dodge Ram 3500, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 2007 Dodge Ram 3500. With over 16 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.99, with an average price of just $15.53. Plus, with over 124 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$17.99

This product is not rated

UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET

“”

from
$3.99

This product is not rated

EGR/EXHAUST AIR SUPPLY GASKET

“”

from
$26.49

This product is not rated

Fuel Injection Throttle Body Mounting Gasket

“”

Popular NTK 2007 Dodge Ram 3500 Fuel and Emissions Systems

NTK auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2007 Dodge Ram 3500 owner should feel confident when installing genuine NTK parts in their vehicle. To ensure the best fit and performance for your 2007 Ram 3500, Advance Auto Parts carries a full inventory of 7 NTK Fuel and Emissions Systems. Plus you will be keeping your Dodge in peak condition while saving money because prices on these NTK Fuel and Emissions Systems range from $26.99 to $74.99, plus, with more than 141 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$26.99

This product is not rated

Ambient Air Temperature Sensor

“”

from
$42.99

This product is not rated

Manifold Absolute Pressure Sensor

“”

from
$27.99

This product is not rated

Air Charge Temperature Sensor

“”

FAQs for 2007 Dodge Ram 3500 Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2007 Dodge Ram 3500s?

Out of 154 Fuel and Emissions Systems that fit 2007 Dodge Ram 3500s, the following parts are the top sellers:

Fuel Injector O-Ring Kit (3504360) – $7.49
Switching Oxygen Sensor: 4 Wire, 11.75" Long, Heated, Direct Fit (20501945) – $54.99
Tethered Fuel Cap (12102515) – $25.99

What’s the price range for 2007 Dodge Ram 3500 Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2007 Dodge Ram 3500 start at $1.99 and go up to $3,227.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2007 Dodge Ram 3500?

The average price for Fuel and Emissions Systems for the 2007 Dodge Ram 3500 is $227.61. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Dodge Ram 3500 model years?

Yes, we currently carry Fuel and Emissions Systems for 13 model years of Dodge Ram 3500s between 1994 and 2010. Fuel and Emissions Systems are bought most frequently for the following model years: 2010, 2009, 2008, 2006, 2005, 2004, 2003, 2000, and 1998.

What are the cheapest Fuel and Emissions Systems for my 2007 Dodge Ram 3500?

The cheapest 2007 Dodge Ram 3500 Fuel and Emissions Systems we carry in stock are:

EGR/EXHAUST AIR SUPPLY GASKET (10109334) – $1.99
Exhaust Gas Recirculation Valve Gasket (10599264) – $3.49
EGR/EXHAUST AIR SUPPLY GASKET (20688251) – $3.49
EGR/EXHAUST AIR SUPPLY GASKET (10017862) – $3.99
EGR Valve Gasket (12576308) – $3.99

What are the top-rated Fuel and Emissions Systems that fit the 2007 Dodge Ram 3500?

Out of 5,264 reviews by customers, our 2007 Dodge Ram 3500 Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2007 Dodge Ram 3500 and their top-rated products:

Fuel Injector Connectors
- Fuel Inlet Tube (11477859) – $41.99

What types of Fuel and Emissions Systems do you sell for my 2007 Dodge Ram 3500?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2007 Dodge Ram 3500:

Can I get help with 2007 Dodge Ram 3500 Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Fuel and Emissions Systems and more.

What is your return policy for Dodge Ram 3500 Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Dodge Ram 3500 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2007 Dodge Ram 3500 Fuel and Emissions Systems

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1087)

Dorman – Fuel Tank Lock Ring (Part No.579-127)

Bosch – Bosch Oxygen Sensor (Part No.C5010111930BOS)

Dorman – Evaporative Emissions Purge Solenoid Valve (Part No.911-236)

Forecast – Forecast MAP Sensor (Part No.C7044175820FOR)

Dorman – Direct Fit DPF – Not CARB Compliant (Part No.674-1002)

KAI – Fuel Tank Strap (Part No.TNKST191)

Carquest Premium – Exhaust Gas Recirculation (EGR) Pressure Sensor (Part No.EGA1487)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)

Dorman – Exhaust Gas Recirculation Tube (Part No.598-164)

Dorman – Fuel Tank O-Ring (Part No.911-245)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Dorman – Exhaust Gas Recirculation Service Kit With Crank Case Ventilation Filter (Part No.904-481)

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Dorman – Remanufactured Diesel Fuel Injection Pump (Part No.502-555)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61372)

Dorman – HD Solutions – Common Rail Fuel Pressure Sensor (Part No.904-7149)

Bosch – Fuel Rail (Part No.0445226044)

Dorman – OE Solutions Fuel Pressure Sensor (Part No.C3001702877DOR)

Dorman – Differential Pressure Sensor (Part No.904-475)

Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.ES 73066)

MAHLE Original – Injector Nozzel O-Ring (Part No.GS33614)

Spectra Premium – Fuel Filler Neck (Part No.FN654)

Dorman – Fuel Vapor Leak Detection Pump (Part No.310-207)

Carquest Premium – Evaporative Emissions System Leak Detection Pump Seal (Part No.VCA1013)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0177)

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1071)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Temperature Sensor (Part No.EGA2626)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1018)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0177)

NTK – Ambient Air Temperature Sensor (Part No.AN0009)

NTK – Air Charge Temperature Sensor (Part No.AJ0019)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1026)

NTK – NTK Oxygen Sensor (Part No.C5010379903NTK)

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Carquest Premium – Air Charge Temperature Sensor (Part No.WTC1164)

DENSO – Oxygen Sensor (Part No.C5010922604ND)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1091)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010344455ND)

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1444)

DENSO – Wideband Oxygen Sensor: 5 Wire, 13.15" Long, Heated, Exact Fit (Part No.234-5090)

Walker – Walker Oxygen Sensor (Part No.C5010380938WKR)

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10238)

Walker Products – Air Charge Temperature Sensor (Part No.C6000352480WKR)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17508)

Carquest Premium – Fuel Cap: 10838, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10838)

Carquest Premium – Fuel Cap (Part No.10842)

Carquest Premium – Locking Fuel Cap: 10508, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10508)

Carquest Premium – Locking Fuel Cap: 10512, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10512)

Motorad – Tethered Fuel Cap (Part No.MGC837T)

Carquest Premium – Fuel Cap (Part No.10838D)

Carquest Premium – Locking Fuel Cap (Part No.10508D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17512)

Motorad – Tethered Fuel Cap (Part No.MGC537T)

Carquest – Fuel Injector (Part No.67533)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61372)

Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 97248)

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1071)

Dorman – Injector Connector Tube (Part No.904-437)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6259)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61415)

Carquest Premium – Fuel Injector Seal Kit (Part No.AC20532)

Carquest – Fuel Injector Seal Kit (Part No.274838)

Continental – Mass Air Flow Sensor (Part No.5WK97506Z)

Bosch – Hydraulic Pressure Relief Valve (Part No.1110010013)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25021)

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33484)

Dorman – Fuel Injector O-Ring Kit (Part No.904-314)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61740)

Delphi – Fuel Injector (Part No.EX631042)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25041)

Dorman – Fuel Control Actuator (Part No.904-581)

Bosch – Metering Unit (Part No.0928400642)

Carquest Premium – Reman Diesel Fuel Injector – 6 Pack (Part No.AD25021-6PK)

Cardone – Fuel Injector (Part No.2J-302)

Bosch – Diesel Fuel Injector: Remanufactured (Part No.0445120193)

Bosch – Fuel Injector (Part No.0986435518)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25031)