2007 Audi A8 Quattro Steering and Chassis Parts

Below you will find various in-demand Audi Steering and Chassis Parts, components and accessories for your 2007 A8 Quattro. Advance Auto Parts has popular A8 Quattro parts like Sway Bars, Tie Rods, Power Steering Parts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other A8 Quattro model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2007 Audi A8 Quattro Steering and Chassis Parts below and start saving instantly.

Popular 2007 Audi A8 Quattro Steering and Chassis Parts Categories

Rack & Pinions

Sway Bar Link Kits

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Power Steering Return Hoses

Rack and Pinion Boots

Tie Rod Assemblies

Lateral Link Bushings

Power Steering Hose Clamps

Rack and Pinion Bellow Clamps

Essential Steering and Chassis Parts for 2007 Audi A8 Quattros

from

$79.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$128.94

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW’s tie rod end joints includes the latest, high performance designs which incorporate the following features:

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$3.60

The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$4.05

The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$3.84

Steering Rack Boot C

from

$61.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$288.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$87.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Zinc coated tubes protect against rust and corrosion
Heat/abrasion tubing protects vital areas
Banjo end lock tabs prevent hose end from loosening

from

$32.49

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$34.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features

from

$53.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Comes with necessary components and hardware for a complete installation
Hardware functionality matches original design requirements
Easy access wrench flat allows for the use of a socket for easy installation and removal
Application specific for this vehicle

from

$54.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$125.99

Easy to install
Restores like-new steering and handling
Loose or worn chassis parts can lead to premature tire wear
Assembly includes inner and outer tie rods for quick and complete repair
Incorporates proven design and engineering features
Easy access wrench flat allows for use of a socket for easy installation and removal

from

$149.99

Complete with inner and outer tie rod ends
Restores OE alignment
Reduces tire wear
Improves steering response

from

$7.62

The FEQ Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$34.12

The ISG Control Arm Bushing is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$46.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$28.99

POWER STEERINGFILTER

from

$6.99

POWER STEERINGFILTER

from

$532.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$481.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$1862.91

Remanufacturing at Robert Bosch Automotive Steering includes all those products which we produce new and supply to vehicle manufacturers as original equipment. Renovation is carried out in accordance with a strictly defined process. All seals, synthetic and plastic parts are replaced 100%. Other parts which do not fall within the tolerance limits of series production are likewise replaced with new spare parts from the production line. The remanufactured units undergo extensive testing on the test rig before being released for delivery. This process ensures that all remanufactured products are of the same quality as those from the production line.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Remanufactured to meet OE specifications

from

$34.49

R & P Bellows

from

$35.99

RACK BELLOW

from

$9.49

Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.

from

$32.49

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$12.49

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

Upgrade your 2007 Audi A8 Quattro with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2007 Audi A8 Quattro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Steering and Chassis Parts are key to keeping your A8 Quattro functioning at its best. At Advance Auto Parts, we offer a wide selection of 44 Steering and Chassis Parts for the 2007 Audi A8 Quattro, designed to meet your needs without breaking the bank. From Sway Bar replacements to Tie Rods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2007 Audi A8 Quattro at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $1.86 to $1,862.91, with an average price of $149.73. Our 44 Steering and Chassis Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 2007 Audi A8 Quattro without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Audi A8 Quattro, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Cardone Moog, and more. Cardone Steering and Chassis Parts start at just $31.99 and boast an impressive 4 stars average rating from customers. With 189 customer reviews and counting, our 2007 Audi A8 Quattro Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Audi A8 Quattro is always ready to roll. We’re committed to providing you with everything you need to keep your A8 Quattro in top shape, all in one place. Start shopping confidently below for your 2007 Audi A8 Quattro!

Best-Selling Sway Bars for 2007 Audi A8 Quattros

Enhance the driving experience in your Audi with 5 quality Sway Bar components, starting at $1.86.

show more show less

from

$40.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features

from

$48.70

Sway Bar Link

from

$37.17

Sway Bar Link

from

$29.99

from

$1.86

Sway Bar Link Nut

Most Popular 2007 Audi A8 Quattro Tie Rods

Customize your Audi with 6 Tie Rods products like Tie Rod Ends and Tie Rod Assemblies, all priced under $149.99.

show more show less

from

$149.99

Complete with inner and outer tie rod ends
Restores OE alignment
Reduces tire wear
Improves steering response

from

$128.94

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$110.83

Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability
Environmental resistance tests for all weather conditions
Wear and drive tests
Assembly technique testing of all critical safety features

from

$99.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$86.69

Tie Rod End

from

$46.94

FEBI Tie rods strictly comply with the specification of the manufacturers providing; quality, performance and exact fitment. The FEBI tie rods ensures a comfortable driving experience and to prevent high-frequency vibrations being transferred to other parts.

Product Features:

Original Equipment Manufacturer
Larger diameter to increase the load carrying capacity
Outstanding slide properties

Top Picks for 2007 Audi A8 Quattro Power Steering Parts

Upgrade Audi A8 Quattros with top-quality Power Steering Parts parts, including 15 OEM and aftermarket selections for your 2007 model.

show more show less

from

$48.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$1862.91

Premium Original Equipment replacement
Provides performance and dependability
Remanufactured to meet OE specifications

from

$532.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$481.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$87.99

Zinc coated tubes protect against rust and corrosion
Heat/abrasion tubing protects vital areas
Banjo end lock tabs prevent hose end from loosening

from

$61.80

The Vaico Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$53.99

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$32.49

Matches OE form, fit and function
One piece neoprene boot (this is not a split boot)
Includes boot and two clamps for complete installation.
Quality construction for durability
Application specific for this vehicle

from

$32.30

Rein Automotive uses only OE-quality steering rack boots, with an exact fit for every import application. Plus, Rein Automotive steering rack boots are always correct in form, fit, and function.

Product Features:

Keeps dirt and contaminates off of critical components
Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$3.84

Steering Rack Boot C

from

$2.73

Radiator Hose Clamp

In-Demand Chassis for 2007 Audi A8 Quattros

Select from 3 premium Chassis parts for your 2007 Audi A8 Quattro, with prices ranging from $7.62 to $34.12.

show more show less

from

$34.12

The ISG Control Arm Bushing is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$28.85

Control Arm Bushing

from

$7.62

The FEQ Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

Most Sold 2007 Audi A8 Quattro Ball Joints

Explore our best-selling Audi parts for the 2007 A8 Quattro among 15 OEM and aftermarket options starting from $126.99.

show more show less

from

$131.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$179.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$179.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$169.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride

from

$167.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$163.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength durability and confidence is required.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride

from

$163.99

MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength durability and confidence is required.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride

from

$153.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$133.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$132.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$131.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$131.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$131.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$131.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$126.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

Top-Rated Steering and Chassis Parts Brands For Your 2007 Audi A8 Quattro

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2007 Audi A8 Quattros. Below you’ll find some of our best rated Steering and Chassis Parts from Cardone and Moog, and more. Steering and Chassis Parts from these brands that fit a 2007 A8 Quattro start at just $31.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Cardone 2007 Audi A8 Quattro Steering and Chassis Parts

When it comes to maintaining or upgrading your 2007 Audi A8 Quattro, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Cardone ticks all of those boxes. We offer a wide selection of Cardone Steering and Chassis Parts, specifically designed for the 2007 Audi A8 Quattro. With over 6 Cardone brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.99, with an average price of just $195.74. Plus, with over 62 customer reviews and an average rating of 4 stars, you can trust that our Cardone Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$481.99

This product is not rated

Remanufactured Rack and Pinion Assembly

“”

from
$532.99

This product is not rated

Remanufactured Rack and Pinion Assembly

“”

from
$31.99

This product is not rated

Power Steering Filter

“”

Popular Moog 2007 Audi A8 Quattro Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2007 Audi A8 Quattro owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2007 A8 Quattro, Advance Auto Parts carries a full inventory of 5 Moog Steering and Chassis Parts. Plus you will be keeping your Audi in peak condition while saving money because prices on these Moog Steering and Chassis Parts range from $40.99 to $169.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$163.99

This product is not rated

Control Arm and Ball Joint Assembly

“”

from
$163.99

This product is not rated

Control Arm and Ball Joint Assembly

“”

from
$169.99

This product is not rated

Suspension Control Arm and Ball Joint Assembly

“”

FAQs for 2007 Audi A8 Quattro Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2007 Audi A8 Quattros?

Out of 44 Steering and Chassis Parts that fit 2007 Audi A8 Quattros, the following parts are the top sellers:

Power Steering Filter (10659735) – $31.99
Stabilizer Bar Link (20519800) – $40.99
Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (12484991) – $31.49

What’s the price range for 2007 Audi A8 Quattro Steering and Chassis Parts?

Steering and Chassis Part prices for the 2007 Audi A8 Quattro start at $1.86 and go up to $1,862.91 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2007 Audi A8 Quattro?

The average price for Steering and Chassis Parts for the 2007 Audi A8 Quattro is $149.73. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Audi A8 Quattro model years?

Yes, we currently carry Steering and Chassis Parts for 27 model years of Audi A8 Quattros between 1997 and 2024. Steering and Chassis Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Steering and Chassis Parts for my 2007 Audi A8 Quattro?

The cheapest 2007 Audi A8 Quattro Steering and Chassis Parts we carry in stock are:

Sway Bar Link Nut (11940793) – $1.86
Radiator Hose Clamp (12591235) – $2.73
Steering Rack Boot C (11684057) – $3.84
Control Arm Bushing (10781607) – $7.62
Control Arm Bushing (12601684) – $28.85

What are the top-rated Steering and Chassis Parts that fit the 2007 Audi A8 Quattro?

Out of 189 reviews by customers, our 2007 Audi A8 Quattro Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2007 Audi A8 Quattro and their top-rated products:

Sway Bars
- Stabilizer Bar Link (20519800) – $40.99

What types of Steering and Chassis Parts do you sell for my 2007 Audi A8 Quattro?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2007 Audi A8 Quattro:

Can I get help with 2007 Audi A8 Quattro Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Steering and Chassis Parts and more.

What is your return policy for Audi A8 Quattro Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Audi A8 Quattro Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2007 Audi A8 Quattro Steering and Chassis Parts

Rare Parts – Tie Rod End (Part No.RP29502)

TRW – TRW Tie Rod End (Part No.M3010324830TRW)

Febi – Steering Rack Boot C (Part No.M1011452369FEB)

Febi – Steering Rack Boot Clamp (Part No.M1011755121FEB)

Rein – Steering Rack Boot C (Part No.M1011452366RIN)

Dorman – Suspension Control Arm (Part No.520-767)

Dorman – Suspension Control Arm (Part No.524-232)

Carquest Premium – Power Steering Return Hose, 14mm Banjo x 3/8" I.D. Hose (Part No.40781)

Driveworks – Sway Bar Link Kits (Part No.DW-K80564)

MOOG – Stabilizer Bar Link (Part No.K750361)

Beck/Arnley – Stabilizer End Link (Part No.101-4933)

Rein – Tie Rod (Part No.SCT0296R)

MOOG – Tie Rod End Assembly (Part No.ES3681A)

Rare Parts – Tie Rod Assbly (Part No.RP29443)

FEQ – Control Arm Bushing (Part No.L2030434458FEQ)

International Suspension Group – Control Arm Bushing (Part No.L2030434458ISG)

Cardone – Power Steering Filter (Part No.20-0012F)

Cardone – Power Steering Filter (Part No.20-P038F)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT3)

BBB Industries – POWER STEERINGFILTER (Part No.991-FLT1)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2927E)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2927)

Bosch – Complete Steering Rack, Remanufactured (Part No.M1000341174BOS)

Rare Parts – R & P Bellows (Part No.RP57370)

Dorman – RACK BELLOW (Part No.541-501)

Rein – Power Steering Rack Boot (Part No.BKP0081R)

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3083)

MOOG – Rack & Pinion Bellows Kit (Part No.K90439)

MOOG – Stabilizer Bar Link (Part No.K80481)

Lemfoerder – Sway Bar Link (Part No.L1030528754LEM)

Delphi – Sway Bar Link (Part No.L1030528754DEL)

Rein – Sway Bar Link (Part No.SCL0126P)

Febi – Sway Bar Link Nut (Part No.L1038422923FEB)

Rare Parts – Tie Rod Assbly (Part No.RP29443)

TRW – TRW Tie Rod End (Part No.M3010324830TRW)

TRW – TRW Tie Rod (Part No.M3001285226TRW)

Rare Parts – Tie Rod End (Part No.RP29467)

Autopart International Inc – Tie Rod End (Part No.M30101934213API)

Febi – Tie Rod (Part No.M3001285226FEB)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Power Steering Filter (Part No.20-0012F)

Cardone – New Power Steering Filter (Part No.20-0038F)

Cardone – Power Steering Filter (Part No.20-P038F)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Bosch – Complete Steering Rack, Remanufactured (Part No.M1000341174BOS)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2927E)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2927)

Carquest Premium – Power Steering Return Hose, 14mm Banjo x 3/8" I.D. Hose (Part No.40781)

Vaico – Vaico Steering Rack Boot (Part No.M1010135705VCO)

Rare Parts – R & P Bellows (Part No.RP57346)

Beck/Arnley – Steering Rack Boot Kit (Part No.103-3084)

Rein – Steering Rack Boot (Part No.M1010135705RIN)

Rein – Steering Rack Boot C (Part No.M1011452366RIN)

MTC – Radiator Hose Clamp (Part No.G2010932381MTC)

International Suspension Group – Control Arm Bushing (Part No.L2030434458ISG)

Autopart International Inc – Control Arm Bushing (Part No.L20302000492API)

FEQ – Control Arm Bushing (Part No.L2030434458FEQ)

Dorman – Suspension Control Arm (Part No.520-993)

Dorman – Suspension Control Arm (Part No.521-750)

Dorman – Suspension Control Arm (Part No.521-749)

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK620619)

Dorman – Suspension Lateral Link (Part No.521-755)

MOOG – Control Arm and Ball Joint Assembly (Part No.CK620621)

MOOG – Control Arm and Ball Joint Assembly (Part No.CK620620)

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK620620)

Dorman – Suspension Control Arm (Part No.520-996)

Rare Parts – Conrol Arm W/Bj (Part No.RP11829)

Rare Parts – Conrol Arm W/Bj (Part No.RP11810)

Dorman – Suspension Control Arm (Part No.520-994)

Rare Parts – Conrol Arm W/Bj (Part No.RP11811)

Dorman – Suspension Control Arm (Part No.520-995)

Rare Parts – Conrol Arm W/Bj (Part No.RP11809)