2006 Porsche Cayman Engine Cooling Parts

Essential 2006 Porsche Cayman Engine Cooling Parts

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA2273)

Engine Coolant Temperature Sensor

from

$80.99
Engine Coolant Temperature Sensor

NTK – Engine Coolant Temperature Sensor (Part No.EF0153)

Engine Coolant Temperature Sensor

from

$29.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Wahler – Thermostat (Part No.G4000648607WAH)

Thermostat

from

$121.87
Wahler is a provider of premium quality thermostats and thermo-switches in OE quality. The varying applications and divergent technologies of the internal combustion engine call for thermostats featuring different operating characteristics and modes of operation. Therefore Wahler provides thermostats with a highly accurate coolant control.

Product Features:
  • Strict quality control, and functional testing
  • Self-cleaning and self-aligning thermostat valve
  • Original equipment design provides exact fit and performance
  • Precise sealing edges reduce leakage and premature cooling
  • Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
  • Stainless steel assembly and springs are engineered for long life
See More

Behr – Radiator (Part No.G1000160864BEH)

Radiator

from

$383.93
Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:
  • OE-Equivalent
  • Direct fit for easy installation.
  • High quality corrosion resistant materials.
  • OE Style mounting brackets and hose connections.
  • Mechanically bonded aluminum core.
  • Integrated transmission oil cooler when applicable.
See More

Carquest Premium – Radiator (Part No.813163)

Radiator

from

$529.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Rein – Thermostat Assembly 83C (Part No.CTA0026)

Thermostat Assembly 83C

from

$44.99
Rein Automotive OE quality thermostat assemblies install, fit and perform the way the original manufacturer intended. These assemblies are designed to meet or exceed the OE materials used. Rein thermostat housings are constructed of metal or plastic based on vehicle specific factory requirements. The housings are constructed from molds cast directly from the OEM parts to meet the strict tolerances of the vehicle’s factory specifications. This ensures a smooth and easy installation, just as one would expect to find with OE quality. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat assemblies aim to provide the profession repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.

Product Features:
  • Matches original equipment design specifications
  • Direct fitments allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Thermostat set to 83 degrees Celsius to maintain optimal running temperature
See More

Pierburg – OE Replacement Water Pump (Part No.G3000653741APG)

OE Replacement Water Pump

from

$470.51
The Pierburg water pump is a 100% new replacement that contains no remanufactured components, assuring original equipment performance, quality and fit.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Resistant to corrosion.
  • Unitized bearing assembly.
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2266)

Engine Water Pump: New, Gasket/Seals Included

from

$237.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.57-1582)

Water Pump: New, Installation Gasket Included

from

$181.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.

Product Features:
  • 100% Factory tested for leakage and dimensional precision
  • Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
  • Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
  • Assembled with new, high-quality unitized shaft seals to prevent premature leakage
  • Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Elring – Water Pump Gasket (Part No.G3040160843ELR)

Water Pump Gasket

from

$20.84
Water Pump Gasket

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Original Equipment – Water Pipe Gasket (Part No.G2048393250OEA)

Water Pipe Gasket

from

$8.03
Water Pipe Gasket

Febi – Expansion Tank Cap (Part No.G1040343540FEB)

Expansion Tank Cap

from

$35.02
The Febi Expansion Tank Cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10249)

Engine Coolant Reservoir Cap

from

$11.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Rein – Cap-Expansion Tank (Part No.CPE0027P)

Cap-Expansion Tank

from

$34.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

2006 Porsche Cayman Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2006 Porsche Cayman. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 21 different Engine Cooling Parts in our inventory ranging from $5.95 to $548.99. That means you can find the exact parts or products you need to keep that 2006 Porsche Cayman running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Porsche Cayman. Permatex, DriveWorks, and Elth are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2006 Porsche Cayman, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2006 Porsche Cayman rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2006 Porsche Cayman Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Porsche Cayman demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Cayman the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

FAQs for 2006 Porsche Cayman Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2006 Porsche Cayman?

Out of 21 Engine Cooling Parts for the 2006 Porsche Cayman, the most popular in our inventory are:
Water Pump: New, Installation Gasket Included
from $181.99
(6)
Water Pump: New, Installation Gasket Included
Water Pumps
Water Temp. Sensor
from $24.17
This product is not rated
Water Temp. Sensor
Coolant Temperature Sensors
Expansion Tank Cap
from $35.02
This product is not rated
Expansion Tank Cap
Coolant Reservoir Caps