2006 Nissan Altima Cooling and Climate Controls

Name: Brake Light Switch Connector
Brand: Carquest Premium
SKU: PTC1134
Price: 39.99 USD

Below you will find various in-demand Nissan Cooling and Climate Controls, components and accessories for your 2006 Altima. Advance Auto Parts has popular Altima parts like Blower Motor and Related Products, Heating Parts, HVAC Electrical Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Altima model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2006 Nissan Altima Cooling and Climate Controls below and start saving instantly.

Popular 2006 Nissan Altima Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Cooling Fan Controllers

AC Replacement Kits

Radiator Caps

AC Compressor Without Clutch

Thermostats

Engine Cooling Fans

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

AC Clutch

Coolant Reservoirs

Coolant Temperature Sensors

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Water Outlets

Engine Coolant Pipe O-Rings

Blower Motor Resistors

Radiator Supports

AC Harness Connectors

Air Conditioning Relays

AC Condensers

AC Compressor Bypass Pulleys

AC Line O-Rings

Radiator Fan Control Relays

Water Pump Install. Kits

AC Evaporators

AC Caps and Valve Core Kits

Engine Coolant Pipes

Thermostat Housing Gaskets

Thermostat Housings

AC Receiver Drier Desiccant Elements

Accumulator and Receiver Driers

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

AC O-Ring and Gasket Kits

AC Discharge Lines

AC Suction Lines

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Hose Assemblies

Blower Relays

Expansion Valve and Orifice Tubes

Radiator Drain Plugs

Engine Water Pump Backing Plate Gaskets

Thermostat Gaskets

Thermostat Housing O-Rings

Engine Coolant Water Outlet Adapter Gaskets

AC Refrigerant Pressure Sensors

Blower Switches

Radiator Cap Adapters

Water Pump Housing O-Rings

Miscellaneous AC Switches

A/C Compressor Nut

Essential Cooling and Climate Controls for 2006 Nissan Altimas

from

$39.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$84.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$18.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$5.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
High quality rubber or composite material designed to withstand high heat conditions
Quality construction for durability
Packaged in clear plastic for easy visibility and identification of all components
Application specific for this vehicle

from

$6.19

Radiator Drain Plug

from

$119.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$201.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$119.99

New Platinum Pro Radiator And Condenser Fan Assembly, 2.5/3.5 Liter Engine

Product Features:

2.5/3.5 Liter Engine, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$60.24

A/C Expansion Valve

from

$21.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$29.99

from

$146.65

Dorman’s Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the durable plastic construction prevents coolant fluid loss.

Product Features:

Comes with reservoir cap
Level sensor included (where applicable)
Direct replacement for a proper fit every time
Quality tested to ensure trouble-free installation and performance

from

$4.35

NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.

from

$1.45

Sway Bar Link Nut

from

$44.61

The Metrix Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.

Product Features:

Excellent electrical and thermal performance
Direct OE replacement
Built to strict quality control standards
100% tested

from

$349.99

Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$4.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$441.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Low Friction Hinge Bearing Mechanism.
High efficiency Low Mass Hollow Piston.

from

$608.98

Valeo manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

OEM Quality Direct fit Application
Guarantees OE quality performance, durability and fitment.
A product 100% ‘new’ developed by Valeo
Matching quality compressor.
Equipped with a new clutch assembly.
Design that associates performance, output and reliability.

from

$20.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$81.99

New Standard Replacement Driver Side Radiator Upper Support

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$60.99

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$4.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$25.99

from

$77.97

Re-engineered to address common failure points in the original equipment, Dorman’s Coolant Water Outlet has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. This is more than a replacement; it’s an upgrade. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:

Direct replacement for a proper fit every time
Hoses slide on for easy installation
High-quality plastic or metal construction
Includes all hardware necessary for a complete repair (where applicable)

from

$26.99

Matches OE form, fit and function
Features a standard jiggle valve where required by OE and has a long stroke for maximum cooling
Constructed with premium materials for durability
Be sure to use the proper coolant to maximize cooling system components. See Beck/Arnley catalog for the coolant for this application.
Application specific for this vehicle

from

$24.05

NTC offers a full line of thermostats to replace your original equipment thermostat. This includes a wide variety of temperature ranges all designed to operate within OEM specifications.

Product Features:

Strict quality control, and functional testing
Self-cleaning and self-aligning thermostat valve
Original equipment design provides exact fit and performance
Precise sealing edges reduce leakage and premature cooling
Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
Stainless steel assembly and springs are engineered for long life

Upgrade your 2006 Nissan Altima with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2006 Nissan Altima, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Altima functioning at its best. At Advance Auto Parts, we offer a wide selection of 154 Cooling and Climate Controls for the 2006 Nissan Altima, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Heating Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2006 Nissan Altima at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.45 to $617.99, with an average price of $88.71. Our 154 Cooling and Climate Controls in stock come from 38 trusted brands, so you’re sure to find the right part for your 2006 Nissan Altima without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Nissan Altima, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Imperial, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Imperial also bring quality to the table, with Cooling and Climate Controls available starting at $11.99, and at an average 4 stars rating. With 4,902 customer reviews and counting, our 2006 Nissan Altima Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Nissan Altima is always ready to roll. We’re committed to providing you with everything you need to keep your Altima in top shape, all in one place. Start shopping confidently below for your 2006 Nissan Altima!

Best-Selling Blower Motor and Related Products for 2006 Nissan Altimas

Enhance the driving experience in your Nissan with 11 quality Blower Motor and Related Product components, starting at $39.99.

show more show less

from

$48.49

The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:

High quality composite housings protect against harsh temperatures and severe under hood conditions
Featuring brass or copper contacts where specified for extended wear
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$77.99

Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.

Product Features:

Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment

from

$51.05

Blower Motor Resisto

from

$39.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$45.99

This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models.
Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs.
Restores functionality – made to perform like original equipment to restore full HVAC operation
Trustworthy quality – backed by team of engineers and quality specialists in the USA

from

$102.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$203.86

Blower Motor

from

$178.81

Blower Motor

from

$63.99

from

$53.99

Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all.
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$44.61

The Metrix Blower Motor Resistor is manufactured to meet or exceed the OE specifications for performance, fit and function.

Product Features:

Excellent electrical and thermal performance
Direct OE replacement
Built to strict quality control standards
100% tested

Most Popular 2006 Nissan Altima Heating Parts

Customize your Nissan with 1 Heating Parts products like Heater Cores, all priced under $146.99.

show more show less

from

$146.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Top Picks for 2006 Nissan Altima HVAC Electrical Parts

Upgrade Nissan Altimas with top-quality HVAC Electrical Parts parts, including 1 OEM and aftermarket selections for your 2006 model.

show more show less

from

$119.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

In-Demand Engine Cooling Parts for 2006 Nissan Altimas

Select from 86 premium Engine Cooling Parts parts for your 2006 Nissan Altima, with prices ranging from $2.33 to $617.99.

show more show less

from

$22.99

Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans

Product Features:

Economy adjustable thermostatic fan control
Economy Model; 32-248°F
For use with Imperial electric fans
Probe installs into radiator fins

from

$69.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$10.99

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$49.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

All-in-one, bolt-on solution that includes everything needed for a complete job
Includes thermostat, seal and housing
Easy, one step fit and installation
No special tools required
Meets or exceeds all OEM standards

from

$8.06

Stant offers a wide variety of radiator cap styles and applications for U.S. and import cars, light trucks, HD trucks, racing, off-road and ag equipment. In addition to the standard OE line of caps, a unique line of high- and low- pressure racing caps are available for high performance vehicles. Additionally, the Lev-R-Vent caps are designed with a lever release to safely release pressure for quicker cooling. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:

The SWIV-EL design allows the cap to be installed and removed much easier than conventional radiator caps.
Meets Original Equipment specifications.
Made from premium materials.
Designed to function on open cooling systems and overflow reservoir type systems.
The Lev-R-Vent features a patented lever release to safely release pressure for quicker cooling.

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$11.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$27.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$179.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$28.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$199.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$54.99

Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$18.29

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$92.99

Electric fan with 16″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
16″ diameter
1,400 CFM
Use as a pusher or puller fan

from

$18.79

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$131.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$3.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$70.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$4.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$94.99

Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:

Rapid-Cool® Thin-Line electric fans
12″ Diameter
800 CFM
Use as a pusher or puller fan

from

$55.99

Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160-210°F push-in probe
For use with Imperial electric fans
Probe installs into radiator fins

from

$99.99

Product Features:

Motors built and tested to quality specifications
14 in. universal fit reversible fan
1250 CFM
UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.

from

$38.49

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Preset thermostatic fan control
185°F preset
For use with Imperial electric fans
Probe installs into radiator fins

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$201.87

DENSO is a leading supplier of radiators to OE car makers around the world. Manufacturers rely on our quality and innovation to remain on the leading edge of engine cooling technology. Our OE experience and know-how ensure our products provide unmatched performance, reliability and fitment. Radiator performance is essential for proper engine cooling and function. DENSO’s radiator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturer’s rigid standards. All DENSO radiators pass our strict durability and function tests. As the result, our radiators deliver reliable performance even under the most demanding conditions. Radiator types: Plastic tank with aluminum core. Plastic tank with copper core. Cross-flow and down-flow configurations. DENSO is known for the unsurpassed quality of its products. Plastic, copper or aluminum components: it doesn’t matter. Our DENSO radiators are dependable, lightweight and made to last. An investment in a DENSO radiator will pay dividends in the long run. Radiators can fail causing leaks or inefficient cooling. This can lead to your engine to run hotter which in turn creates excess wear and tear on the engine. DENSO radiators are designed with our First Time Fit® philosophy in mind. You get radiators that drop in easily without the need for adjustment, brackets or modification of any kind. Our radiators are precision built to provide the right part, the right fit, the first time.

Product Features:

Fin Pitch – Superior fin waves provide a higher heat transfer.
Flow Configuration – Available in cross-flow and down-flow configurations.
Aluminum or Copper Core – Thin-tube construction assures maximum cooling efficiency.

from

$8.99

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part.
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$62.99

Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.

Product Features:

Adjustable thermostatic fan control
160°F – 210°F thread-in probe
For use with Imperial electric fans
Thread-in probe for installation in water jacket or radiator

from

$29.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$25.99

from

$107.99

New Platinum Pro Radiator, 3.5 Liter V6 Engine

Product Features:

3.5 Liter V6 Engine, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$34.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$67.99

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$5.99

Matches OE form, fit and function
High quality rubber or composite material designed to withstand high heat conditions
Quality construction for durability
Packaged in clear plastic for easy visibility and identification of all components
Application specific for this vehicle

from

$153.88

Plastic Tank / Aluminum Core Radiator Koyo radiators are available in plastic tank and aluminum core. The Nocolok brazing line keeps the highest quality standards, bringing you superior products you can rely on. The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.

Product Features:

All Aluminum Core and Plastic Tank
OE Style mounting brackets and hose connections
Integrated transmission oil cooler when applicable
Compact and lightweight

from

$3.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$155.63

The Hitachi water pump is a 100% new replacement that contains no remanufactured components, assuring original equipment performance, quality and fit.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Resistant to corrosion.
Unitized bearing assembly.

from

$3.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$5.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$4.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$152.84

The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Advanced technological design.
Carbon ceramic sealing.
Resistant to corrosion.
Optimum cooling performance and longevity.

from

$189.36

Fin Pitch – Superior fin waves provide a higher heat transfer.
Flow Configuration – Available in cross-flow and down-flow configurations.
Aluminum or Copper Core – Thin-tube construction assures maximum cooling efficiency.

from

$115.99

Thin-line electric fan
16″ diameter
1,400 CFM
Use as a pusher or puller fan

from

$8.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$155.80

All Aluminum Core and Plastic Tank
OE Style mounting brackets and hose connections
Integrated transmission oil cooler when applicable
Compact and lightweight

from

$119.99

New Platinum Pro Radiator And Condenser Fan Assembly, 2.5/3.5 Liter Engine

Product Features:

2.5/3.5 Liter Engine, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$111.99

Hitachi’s Water Pump (WUPs) are crucial to the cooling system preventing your vehicle from overheating! With a cast aluminum housing to keep weight down and machined steel internals Hitachi’s WUPs ensure durability with high thermal efficiency. Efficient impeller and flow path designs provide optimal coolant flow and pressure the cooling system. All steel components are powder coated for rust prevention. Each WUP comes with the correct o-ring(s). gasket(s) and/or stud(s) when applicable so there is nothing else to purchase. Designed to meet the exact needs of each specific vehicle, Hitachi’s Water Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivery industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters. Cooling the area around the cylinders is critical to the life of your engine. At the heart of the cooling system, Hitachi’s water pump delivers the crucial element to maintain the engine’s temperature and prevent seizing.

Product Features:

O-ring(s)/Gasket(s)/Stud Bolt(s) included when applicable
Designed to ensure optimal circulation; Keeps the engine running cool.
Hitachi is a Tier 1 OE supplier for water pumps
100% NEW, never remanufactured
Meets the OE performance and durability standards for this application
Cast aluminum housing with machined steel internals for lightweight, durability, and high thermal efficiency
Efficient impeller and flow path designs provide optimal coolant flow and pressure
All steel components powder coated for rust prevention

Most Sold 2006 Nissan Altima Air Conditioning Parts

Explore our best-selling Nissan parts for the 2006 Altima among 55 OEM and aftermarket options starting from $1.45.

show more show less

from

$14.49

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$583.65

Valeo manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

OEM Quality Direct fit Application
Guarantees OE quality performance, durability and fitment.
A product 100% ‘new’ developed by Valeo
Matching quality compressor.
Equipped with a new clutch assembly.
Design that associates performance, output and reliability.

from

$98.76

A/C Evaporator

from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$419.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.

from

$41.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$214.99

Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.

Product Features:

O-Rings and gaskets necessary for installation are included.
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$25.05

Product Features:

Premium components ensure optimum performance and long service life under all operating conditions
Neodymium in the core creates the strongest magnetic field and produces max high voltage output at all speeds
High-dielectric epoxy injected into case and pulled into vacuum to eliminate air pockets and prevent moisture intrusion or thermal breakdown
Reinforced bobbins prevent voltage flashover for an extended service life

from

$74.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$25.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$10.99

New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:

MT2909
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$40.99

from

$20.49

from

$26.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$70.84

A/C Pressure Switch

from

$26.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$219.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.

from

$64.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$199.99

Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality stAndards in the Re-manufacturing process

from

$108.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$78.99

New Platinum Pro A/C Condenser, 2.5/3.5 Liter Engines

Product Features:

2.5/3.5 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$27.99

New Standard Replacement A/C Receiver Drier/Desiccant Element

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$169.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$99.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$349.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$60.24

A/C Expansion Valve

from

$56.99

100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
Welds and crimps meet and exceed original equipment tension specifications.
Manufactured to allow flexibility in the hose to conform to engine compartments.
O-Rings necessary for installation are included.

from

$22.60

METRIX receiver driers are manufactured to OE specifications and provide durable, efficient performance. The OE engineered internal components provide enhanced separation of liquid and vapor, along with a desiccant filter that effectively controls moisture and helps protect the entire A/C system against corrosion. METRIX receiver driers features a lightweight aluminum assembly and provides an exact fit, just as an OE-quality part should.

Product Features:

OE-Quality – Exact Fit
Utilizes factory style fittings and connectors
Compatible with both R12 and R134A refrigerant
Manufactured using the highest quality components

from

$608.98

Valeo manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

OEM Quality Direct fit Application
Guarantees OE quality performance, durability and fitment.
A product 100% ‘new’ developed by Valeo
Matching quality compressor.
Equipped with a new clutch assembly.
Design that associates performance, output and reliability.

from

$434.99

As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$420.58

A/C Compressor

from

$381.99

DENSO is the world’s largest OE supplier of A/C compressors
Each compressor is precision manufactured for exact replacement
Designed for high output and extended durability
Highest quality in the Aftermarket

from

$369.99

New Standard Replacement A/C Compressor, DKS17D, 6 Groove

Product Features:

DKS17D, 6 Groove
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$324.60

The Original Equipment Air Conditioning Compressor Clutch is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$321.03

A/C Compressor

from

$198.26

Koyo engineers design the A/C Condensers to meet the demanding OE specifications, offering a true plug and play installation: No drilling, cutting, relocating, or stretching to get our radiators to fit properly.

Product Features:

Japanese Engineered, OE Equivalent Quality
Meet or exceed OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Compatible with R12 and R134a refrigerant.
Applicable gaskets and O-rings supplied with each part.

from

$159.60

A/C Hose

from

$152.54

The PEX OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:

OE quality direct fit application
Manufactured to meet or exceed OE requirements and testing
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference

from

$151.69

ABS Speed Sensor

from

$136.06

ABS Speed Sensor

from

$135.69

A/C Hose

from

$122.51

A/C Hose

from

$120.82

A/C Hose

from

$114.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$107.32

TYC brand Evaporators are designed to compliment and optimize a vehicle’s air conditioning system with years of trouble-free service. Tubes and fins are manufactured from high grade aluminum to improve longevity. Precision cut and stamped aluminum plates reduce weight and increase lifespan of the Evaporator. TYC brand Evaporators will fit perfectly and perform comparable to the original equipment.

Product Features:

OE Quality
All aluminum core
Precision cut and stamped aluminum plates

from

$101.76

A/C Hose

from

$75.11

A/C Hose

from

$53.38

A/C Hose

Top-Rated Cooling and Climate Controls Brands For Your 2006 Nissan Altima

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2006 Nissan Altimas. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Imperial, and more. Cooling and Climate Controls from these brands that fit a 2006 Altima start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2006 Nissan Altima Cooling and Climate Controls

When it comes to maintaining or upgrading your 2006 Nissan Altima, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2006 Nissan Altima. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Popular Carquest Premium 2006 Nissan Altima Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2006 Nissan Altima owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2006 Altima, Advance Auto Parts carries a full inventory of 33 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Nissan in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $11.99 to $617.99, plus, with more than 324 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$25.99

This product is not rated

Multi Purpose Relay

“”

from
$29.99

This product is not rated

Coolant Temperature Sensor

“”

from
$40.99

This product is not rated

Multi Purpose Relay

“”

FAQs for 2006 Nissan Altima Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2006 Nissan Altimas?

Out of 154 Cooling and Climate Controls that fit 2006 Nissan Altimas, the following parts are the top sellers:

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Cap & Valve A/C System Seal Kit (15890310) – $17.99
Adjustable Thermostatic Fan Control (6016936) – $22.99

What’s the price range for 2006 Nissan Altima Cooling and Climate Controls?

Cooling and Climate Control prices for the 2006 Nissan Altima start at $1.45 and go up to $617.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2006 Nissan Altima?

The average price for Cooling and Climate Controls for the 2006 Nissan Altima is $88.71. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Nissan Altima model years?

Yes, we currently carry Cooling and Climate Controls for 31 model years of Nissan Altimas between 1993 and 2024. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Cooling and Climate Controls for my 2006 Nissan Altima?

The cheapest 2006 Nissan Altima Cooling and Climate Controls we carry in stock are:

Sway Bar Link Nut (11948709) – $1.45
Water Pipe O-Ring (11814404) – $2.33
Engine Coolant Water Outlet Adapter Gasket (12600465) – $3.29
Water Pump Hsng Gask (12073970) – $3.44
Engine Coolant Outlet Gasket (15780031) – $3.49

What are the top-rated Cooling and Climate Controls that fit the 2006 Nissan Altima?

Out of 4,902 reviews by customers, our 2006 Nissan Altima Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2006 Nissan Altima and their top-rated products:

Blower Motor and Related Products
- A/C Compressor Control Relay (10016103) – $48.49
Engine Cooling Parts
- A/C Compressor Control Relay (10016103) – $48.49

What types of Cooling and Climate Controls do you sell for my 2006 Nissan Altima?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2006 Nissan Altima:

Can I get help with 2006 Nissan Altima Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Cooling and Climate Controls and more.

What is your return policy for Nissan Altima Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Nissan Altima Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Nissan Altima Cooling and Climate Controls

Carquest Premium – Brake Light Switch Connector (Part No.PTC1134)

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34869)

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26747)

Beck/Arnley – Water Outlet Gasket (Part No.039-0124)

Ohno – Radiator Drain Plug (Part No.G1060122008OHN)

Factory Air – System Mounted Pressure Transducer (Part No.20994)

Carquest Premium – A/C Condenser (Part No.714979)

KAI – Rad/Condenser Fan Assembly (Part No.NI3115116)

Santech – A/C Expansion Valve (Part No.R1045423653SII)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10267)

Carquest Premium – HVAC Blower Control Switch (Part No.BLC1095)

Dorman – OE Solutions Coolant Reservoir – Expansion Tank (Part No.G1030391538DOR)

Nippon Reinz – Water Pipe O-Ring (Part No.G2026122022NRZ)

Original Equipment – Sway Bar Link Nut (Part No.L1038247690OEA)

Metrix – Metrix Blower Motor Resistor (Part No.R2032237304MTX)

Carquest Premium – A/C Compressor and Component Kit (Part No.5675K)

Felpro – THERMOSTAT GASKET (Part No.35769)

Carquest Premium – A/C New, with Clutch, with DCS171C Compressor (Part No.T68667)

Valeo – A/C Compressor w/ Clutch, New (Part No.R1000316847VAL)

Carquest Premium – Multi Purpose Relay (Part No.RAA1754)

KAI – Radiator Support (Part No.NI1225218)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56328)

Felpro – WATER OUTLET GASKET (Part No.35228)

Carquest Premium – Multi Purpose Relay (Part No.RAA1742)

Dorman – Radiator Hose Pipe Adapter (Part No.G2025835486DOR)

Beck/Arnley – Thermostat (Part No.143-0824)

NTC – TAMA – NTC Thermostat (Part No.G4000379761NTC)

Carquest – A/C Compressor Control Relay (Part No.R6145)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1043)

Santech – Blower Motor Resisto (Part No.R2032335593SII)

Carquest Premium – Brake Light Switch Connector (Part No.PTC1134)

Dorman – Blower Motor Resistor Kit With Harness (Part No.973-118)

Carquest Premium – Blower Motor: Without Wheel (Part No.75814)

Original Equipment – Blower Motor (Part No.R2031139974OEA)

VDO – Blower Motor (Part No.R2031139974VDO)

Carquest Premium – HVAC Blower Control Switch (Part No.BLA1037)

Dorman – HVAC Blower Motor Resistor (Part No.973-263)

Metrix – Metrix Blower Motor Resistor (Part No.R2032237304MTX)

Carquest Premium – Heater Core (Part No.399184)

Factory Air – System Mounted Pressure Transducer (Part No.20994)

Imperial – Adjustable Thermostatic Fan Control (Part No.226203)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1234)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack (Part No.54245)

Motorad – Integrated Thermostat Housing: With Gasket, 180 Degrees (Part No.431-180)

Stant – Radiator and Reservoir Caps (Part No.G101032815STN)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator Cap: 13 PSI (Part No.10227)

Motorad – Thermostat: With Seals, With Gasket, 180, 203 Degrees (Part No.427457)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432315)

Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.14678)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432621)

Carquest Premium – Integrated Thermostat Housing: With Gasket, 180 Degrees (Part No.14778)

Felpro – WATER OUTLET GASKET (Part No.35752)

Carquest Premium – Standard Thermostat: With Seal, 203 Degrees (Part No.15112)

Imperial – Electric Fan 16" Diameter (Part No.226116)

Carquest Premium – Radiator Cap: 13 PSI (Part No.10327)

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-419)

Felpro – Engine Coolant Outlet Gasket (Part No.35622)

Dorman – Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-614)

Felpro – Engine Water Pump Gasket (Part No.35755)

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Imperial – Adjustable Thermostatic Fan Control (Part No.226204)

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Imperial – Thermostatic Fan Control – Preset (Part No.226206)

Felpro – Engine Coolant Outlet Gasket (Part No.35620)

DENSO – First Time Fit Radiator (Part No.G1000446476ND)

Dorman – Help – Radiator Drain Cocks (Part No.61137)

Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1016)

Carquest Premium – Multi Purpose Relay (Part No.RAA1742)

KAI – Radiator (Part No.RAD2415)

NTK – Engine Coolant Temperature Sensor (Part No.EF0107)

Motorad UltraStats – Thermostat: With Gasket, With Seals, 180, 203 Degrees (Part No.5427457)

Beck/Arnley – Water Outlet Gasket (Part No.039-0124)

Koyo Cooling – Radiator (Part No.G1000122104KCS)

MAHLE Original – WTR INLET GASKET (Part No.C31681)

Hitachi – OE Replacement Water Pump (Part No.G3000399697HIT)