2006 Nissan Altima Air Conditioning Parts

Essential 2006 Nissan Altima Air Conditioning Parts

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26748)

O-Ring & Gasket A/C System Seal Kit

from

$14.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV and rear air applications
See More

Original Equipment – Sway Bar Link Nut (Part No.L1038247690OEA)

Sway Bar Link Nut

from

$1.45
Sway Bar Link Nut

KAI – A/C Desiccant Element (Part No.ARD010085)

A/C Desiccant Element

from

$27.99
New Standard Replacement A/C Receiver Drier/Desiccant Element

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Connector (Part No.PTA1233)

Connector

from

$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Standard – Reman York-Diesel Kiki-Zexel-Seltec DCS171C Compressor w/ Clutch (Part No.DW67667)

Reman York-Diesel Kiki-Zexel-Seltec DCS171C Compressor w/ Clutch

from

$312.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Original Equipment – Air Conditioning Compressor Clutch (Part No.R1010327082OEA)

Air Conditioning Compressor Clutch

from

$304.45
The Original Equipment Air Conditioning Compressor Clutch is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.5675K)

A/C Compressor and Component Kit

from

$349.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39023)

A/C Block Type O-Ring Expansion Valve

from

$41.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Condenser (Part No.714979)

A/C Condenser

from

$201.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Dorman – Help – Air Conditioning Bypass Pulley (Part No.34869)

Air Conditioning Bypass Pulley

from

$84.99
This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:
  • Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed.
  • Durable components – this bypass pulley uses quality components for a long service life
  • Easy to install – uses the same mounting points as the A/C compressor
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83132)

A/C Filter Drier with Pad Mount

from

$25.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C New, with Clutch, with VCS-14EC Compressor (Part No.T98667)

A/C New, with Clutch, with VCS-14EC Compressor

from

$458.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T55121)

A/C Suction Line Hose Assembly

from

$74.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.CCA1033)

A/C Refrigerant Pressure Sensor

from

$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56135)

A/C Discharge Line Hose Assembly

from

$57.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56077)

A/C Discharge Line Hose Assembly

from

$56.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26747)

O-Ring & Gasket A/C System Seal Kit

from

$18.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV and rear air applications
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Cap & Valve A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Carquest – Multi Purpose Relay (Part No.83A1018)

Multi Purpose Relay

from

$14.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1501)

Multi Purpose Relay

from

$40.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

TYC – Genera A/C Evaporator (Part No.R1130681899TYC)

Genera A/C Evaporator

from

$135.32
TYC brand Evaporators are designed to compliment and optimize a vehicle’s air conditioning system with years of trouble-free service. Tubes and fins are manufactured from high grade aluminum to improve longevity. Precision cut and stamped aluminum plates reduce weight and increase lifespan of the Evaporator. TYC brand Evaporators will fit perfectly and perform comparable to the original equipment.

Product Features:
  • OE Quality
  • All aluminum core
  • Precision cut and stamped aluminum plates
See More

Santech – A/C Evaporator (Part No.R11302732232SII)

A/C Evaporator

from

$257.91
A/C Evaporator

Original Equipment – Original Equipment ABS Speed Sensor (Part No.N6030227845OEA)

Original Equipment ABS Speed Sensor

from

$282.18
The Original Equipment brand ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment. The Original Equipment brand ABS speed sensor is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

Pex – PEX ABS Speed Sensor (Part No.N6030227845PEX)

PEX ABS Speed Sensor

from

$159.42
The PEX OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

Santech – A/C Hose (Part No.R1020402471SII)

A/C Hose

from

$129.34
A/C Hose

Santech – A/C Hose (Part No.R1020518648SII)

A/C Hose

from

$150.98
A/C Hose

KAI – A/C Service Valve (Part No.FTT010751)

A/C Service Valve

from

$10.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:
  • MT2909
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Santech – A/C Service Valve Co (Part No.R1254946899SII)

A/C Service Valve Co

from

$9.79
A/C Service Valve Co

2006 Nissan Altima Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 2006 Nissan Altima. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 55 different Air Conditioning Parts in our inventory ranging from $1.45 to $608.98. That means you can find the exact parts or products you need to keep that 2006 Nissan Altima running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 17 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Nissan Altima. Factory Air, Carquest Premium, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 2006 Nissan Altima, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 306 reviews in this category, some of the top rated parts include A/C Compressor w/ Clutch, New with 5.0 stars and A/C New, with Clutch, with DKS17D Compressor with 4.5 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 2006 Nissan Altima rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 2006 Nissan Altima Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Nissan Altima demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Altima the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Air Products Air Conditioning Parts

We carry Air Products parts in our stock across AC Evaporators categories, plus more. For a 2006 Nissan Altima, our most popular Air Products Air Conditioning Parts include:
A/C Evaporator
from $98.76
(3)
A/C Evaporator
AC Evaporators

Top 2006 Nissan Altima Air Conditioning Parts from Factory Air

Factory Air products are another trusted brand when it comes to Air Conditioning Parts for your 2006 Nissan Altima. Popular Factory Air parts include:
Cap & Valve A/C System Seal Kit
from $17.99
(29)
Cap & Valve A/C System Seal Kit
AC Line O-Rings
O-Ring & Gasket A/C System Seal Kit
from $14.49
(6)
O-Ring & Gasket A/C System Seal Kit
AC O-Ring and Gasket Kits

FAQs for 2006 Nissan Altima Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 2006 Nissan Altima?

Out of 55 Air Conditioning Parts for the 2006 Nissan Altima, the most popular in our inventory are:
A/C Remanufactured; w/ Clutch; w/ DKS17D Compressor
from $214.99
(3)
A/C Remanufactured; w/ Clutch; w/ DKS17D Compressor
AC Compressor Without Clutch
A/C Compressor Control Relay
from $25.05
(5)
A/C Compressor Control Relay
Air Conditioning Relays
A/C Filter Drier with Pad Mount
from $25.99
(3)
A/C Filter Drier with Pad Mount
Accumulator and Receiver Driers

What are the top-rated 2006 Nissan Altima Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 2006 Nissan Altima based on customer reviews/ratings are:
A/C Compressor w/ Clutch, New
from $583.65
(2)
A/C Compressor w/ Clutch, New
“Very quiet”
A/C New, with Clutch, with DKS17D Compressor
from $419.99
(2)
A/C New, with Clutch, with DKS17D Compressor
“Works very well, for my Nissan Altima 2006, I’m satisfied with the compressor”
A/C Suction Line Hose Assembly
from $74.99
(2)
A/C Suction Line Hose Assembly
“Great product for a great price.”