2006 Lincoln Mark LT Drivetrains

Below you will find various in-demand Lincoln Drivetrains, components and accessories for your 2006 Mark LT. Advance Auto Parts has popular Mark LT parts like Universal Joints, Transfer Cases, 4WD Components and more. You’ll also find aftermarket and OEM Drivetrains for other Mark LT model years including 2007 2008 and more. Select a category of 2006 Lincoln Mark LT Drivetrains below and start saving instantly.

Popular 2006 Lincoln Mark LT Drivetrains Categories

Differential Oil

4WD Hub Locking Actuator Deletes

Axle Shaft Universal Joints

4WD Actuator Switches

4WD Axle Actuator Housings

Drive Shaft Support Bolts

U-Joints

Drive Shaft and Axles

Transfer Case Assemblies

Transmission Transfer Case Motors

Transfer Case Adapter Gaskets

Transfer Case Gaskets

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Drive and Prop Shaft Assemblies

Differential Bearings

Differential Pinion Flanges

Differential Axle Shafts

Bearing Pullers

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

OE CV Boot Kits

Differential Pinion Pilot Bearings

4WD Switches

U-Joint Centering Yokes

Differential Cover Bolts

Axle Shaft Bearings

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Axle Spindle Bearings

Differential Disc Kits

Differential Clutch Packs

4WD Actuator Valves

Differential Ring and Pinions

Differential End Yokes

Spindle Lock Nuts

Differential Spools

Differential Carrier Bearings

Differential Lock Springs

Axle Nuts

Transfer Case Output Shaft Bearings

Differential Pinion Bearing Kits

Axle Shaft Seal Retainers

Complete Differentials

Bearing and Seal Overhaul Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Input Shaft Seals

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Axle Shaft Studs

Differential Drive Pinion Oil Deflectors

Limited Slip Differential Assemblies

Differential Pinion Bearing Spacers

4WD Locking Hub Actuator Vacuum Hoses

Differential Pinion Gear Nut

Essential Drivetrains for 2006 Lincoln Mark LTs

from

$74.67

4WD Actuator Valve

from

$236.73

Transfer Case Motor

from

$20.29

Product Features:

Brand may vary by location

from

$2.59

Universal Joint Strap Kit

from

$269.99

This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:

Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
Quality materials – all components are built for reliable longevity and performance.
Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
Trustworthy quality – backed by team of designers and engineers in the United States

from

$31.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific, providing unsurpassed quality for a seal you can trust
Validated for fit, form, and function
Engineered for the sealing repair environment
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$10.49

Product Features:

SOLID SPACER FORD 8.8″ & 9″

from

$20.29

This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$499.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits 2000-2010 Ford 9.75″
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$176.99

Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$5.99

Ford 7.5″ & 8.8″ ring gear bolt, standard Open & TracLoc. 7/16″ x 20.

Product Features:

Ring gear bolt for Ford 7.5″ and 8.8″
7/16″ x 20

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$134.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits Ford 8.8″
Includes carrier bearings and races and “super” carrier shim kit

from

$22.99

8.8″ Reverse inner pinion bearing oil baffle.

Product Features:

Oil baffle
Fits Ford 8.8″ IFS

from

$10.79

Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.

Product Features:

Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications.
Effective fix – restores a tight seal in the transfer case after original gasket fails.
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$144.99

Product Features:

KIT, SUPER BRG & SEAL-FORD 8.8 TRK TIMKEN

from

$109.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$9.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$30.99

Pinion gear thrust washer for 9.75″ Ford.

Product Features:

Pinion gear thrust washer
Fits Ford 9.75″

from

$8.99

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
.150″ thick

from

$26.99

Pinion nut for GM 7.6″ IRS, 8.6″ IRS and some Ford 9.75″, Check threads for proper fit before before installing. 22mm x 1.5mm, Uses 32mm socket.

Product Features:

Pinion nut for GM 7.6″ IRS and 8.6″ IRS and some Ford 9.75″
22mm x 1.5 thread
32mm socket

from

$34.12

With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:

Help restore the vehicle to like-new condition
Constructed of high strength OE materials
Resists environmental contamination
Protects the CV joint from premature failure

from

$5.99

This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$834.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

Fits Ford 8.8″ with 28 spline axles
4-spring, clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$30.99

7.5″, 8″, 8.8″, 9″, 10.25″ Ford REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:

Redi-Sleeve yoke saver
Fits Ford 7.5″, 8.8″, 9″ and 10.25″

from

$1035.99

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free perfor mance at all speeds.

Product Features:

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$13.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$299.99

Product Features:

Spider gear kit
Fits Ford 8.8″ 31 spline Trac Loc positraction
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

Upgrade your 2006 Lincoln Mark LT with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2006 Lincoln Mark LT, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lincoln or enhancing its overall performance, Drivetrains are key to keeping your Mark LT functioning at its best. At Advance Auto Parts, we offer a wide selection of 339 Drivetrains for the 2006 Lincoln Mark LT, designed to meet your needs without breaking the bank. From Universal Joint replacements to Transfer Cases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2006 Lincoln Mark LT at great prices. Our Drivetrains inventory for this model ranges from just $1.99 to $1,958.99, with an average price of $211.09. Our 339 Drivetrains in stock come from 31 trusted brands, so you’re sure to find the right part for your 2006 Lincoln Mark LT without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Lincoln Mark LT, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Moog, Dorman, and more. Valvoline Drivetrains start at just $12.49 and boast an impressive 5 stars average rating from customers. Moog and Dorman also bring quality to the table, with Drivetrains available starting at $5.99, and at an average 4 stars rating. With 1,178 customer reviews and counting, our 2006 Lincoln Mark LT Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Lincoln Mark LT is always ready to roll. We’re committed to providing you with everything you need to keep your Mark LT in top shape, all in one place. Start shopping confidently below for your 2006 Lincoln Mark LT!

Best-Selling Universal Joints for 2006 Lincoln Mark LTs

Enhance the driving experience in your Lincoln with 28 quality Universal Joint components, starting at $2.59.

show more show less

from

$39.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.

from

$2.59

Universal Joint Strap Kit

from

$25.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$15.99

DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$32.99

Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$36.99

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$36.99

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$41.99

BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$19.99

Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST — Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE — Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN — Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR — Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE — Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$8.39

Universal Joint – Brute Force

from

$7.89

Universal Joint

from

$4.59

Universal Joint

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$5.49

Universal Joint – Brute Force

from

$5.39

Universal Joint

from

$37.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$159.99

Yukon flange yoke for Ford 9.75″. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 9.75″
31 spline

from

$61.99

Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.

from

$176.99

from

$51.99

Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.

from

$32.60

Designed and built by GMB to handle the highest loads and excessive torque found in pickups, SUVs, 4x4s and off road vehicles.

Product Features:

Elliptical bearing design delivers reliable performance under the heaviest of loads
Exclusive GMB Ultra-select bearing design exceeds OE specification
Precision finish trunnions and bearing surfaces ensure durability
Proven reliability in off-road conditions and harsh environments

from

$172.44

U Joint

from

$111.99

Yukon 1350 to Mechanics 3R adaptor U/joint.

from

$49.99

Universal Joint

from

$36.99

Universal Joint

from

$15.59

Universal Joint

from

$12.99

DrvShftPinYoke

Most Popular 2006 Lincoln Mark LT Transfer Cases

Customize your Lincoln with 23 Transfer Cases products like Transfer Case Gaskets, Input Shaft Bearings, and Transmission Transfer Case Motors, all priced under $1,429.99.

show more show less

from

$15.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$10.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$214.99

Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

Product Features:

Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications.
Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion.
100% new – this transfer case motor is entirely new, not remanufactured like competitors
Quality assured – vehicle-specific application has been validation tested to ensure quality

from

$21.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$203.99

CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:

All motors are 100% torque tested to ensure strength for proper gear engagement.
Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
Motor magnets are 100% recharged for superior performance and reliability.
Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$10.79

Transfer case gasket warped and cracked? This replacement gasket restores a tight seal to prevent fluid leaks on certain vehicle years, makes and models.

Product Features:

Direct replacement – this transfer case gasket matches the fit and performance of the original gasket on specific vehicle applications.
Effective fix – restores a tight seal in the transfer case after original gasket fails.
Durable construction – built for reliable longevity, free of defects in materials and workmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$4.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$31.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific, providing unsurpassed quality for a seal you can trust
Validated for fit, form, and function
Engineered for the sealing repair environment
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$19.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$236.73

Transfer Case Motor

from

$1429.99

Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.

Product Features:

Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
OEM cores are processed as individual units throughout the tear down and assembly process
Cores cleaned using our Hydro Blast cleaning and rinse process
All case halves wet sanded to ensure perfect mating surfaces
Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
Remanufactured in our ISO9001:2008 USA facility.
Without Motor

from

$1396.99

Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
OEM cores are processed as individual units throughout the tear down and assembly process
Cores cleaned using our Hydro Blast cleaning and rinse process
All case halves wet sanded to ensure perfect mating surfaces
Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
Remanufactured in our ISO9001:2008 USA facility.
Without Motor

from

$149.99

Transfer Case Motor

from

$144.99

TRANSFER CASE PARTS

from

$132.99

TCaseBrg-SealKit

from

$64.47

Trans Case Output Sh

from

$36.72

Trans Case Output Sf

from

$24.79

BEARING

from

$18.40

Trans Case Output Sh

from

$11.29

CUP

from

$9.56

Trans Case Output Sh

from

$9.29

TCaseOutputShaftSeal

from

$5.99

TCaseInputShaftSeal

Top Picks for 2006 Lincoln Mark LT 4WD Components

Upgrade Lincoln Mark LTs with top-quality 4WD Components parts, including 10 OEM and aftermarket selections for your 2006 model.

show more show less

from

$179.99

The internal diaphragm on vacuum-activated hub actuators is prone to failure on certain 4WD vehicles. This replacement hub locking actuator restores 4WD and ensures greater reliability by eliminating that problematic vacuum function.

Product Features:

Dependable solution – this unique hub locking actuator delete enables 4WD operation while disabling the failure-prone original vacuum function.
Cost-effective fix – deleting need for troublesome vacuum saves future replacement cost and frustration.
Patented design – exclusively engineered in the United States by highly trained automotive experts
Fully reversible – actuator includes vacuum caps for holding remnant lines and allow for restoring original function in future

from

$112.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Direct-fit replacement provides proper fit, form, and function
Quality-engineered replacement for damaged OE units with rotted or torn diaphragms, which cause actuators to fail, prevent hubs from engaging, and cause vehicles to be stuck in 2WD mode
Quality-designed vacuum-operated diaphragm allows axles to engage properly during 4WD operation
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$111.99

This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models.
Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator.
Smart solution – delivers reliable fit and function for competitive price
Trustworthy quality – backed by team of designers and engineers in the United States

from

$45.49

This 4WD hub locking solenoid directly replaces the original equipment solenoid on certain vehicle years, makes and models.

Product Features:

Direct replacement – this 4WD hub locking solenoid matches the fit and function of the stock solenoid on certain vehicle applications.
Effective fix – restores control of 4WD system impacted by failed original solenoid.
Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
Trustworthy quality – backed by team of designers and engineers in the United States

from

$104.99

from

$61.97

4WD Actuator Valve

from

$160.75

Locking Hub Actuator

from

$109.99

from

$74.67

4WD Actuator Valve

from

$67.99

This 4WD hub locking actuator vacuum hose is designed to match the fit and function of an original hose on specified vehicles to help ensure proper engagement and disengagement of a front wheel hub on a 4WD system..

Product Features:

Direct replacement – this 4WD hub locking actuator vacuum hose is designed to match the fit and function of an original hose on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper engagement and disengagement of a front wheel hub on a 4WD system when an original hose is leaking or has failed from fatigue
Durable construction – this hose is made from quality components and materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

In-Demand Differentials for 2006 Lincoln Mark LTs

Select from 240 premium Differentials parts for your 2006 Lincoln Mark LT, with prices ranging from $1.99 to $1,958.99.

show more show less

from

$14.49

Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$35.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$25.99

Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:

Maximizes horsepower
Extends gear and bearing life
Reduces operating temperature
Lower coefficient of friction
Superior corrosion protection
Separates rapidly from water
For use with open, limited-slip and locking differential
Contains limited-slip friction modifier
Made in USA

from

$69.99

Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$48.99

This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:

Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$9.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$38.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$126.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

KIT BRG&SL FORD MSTR 8.8

from

$179.99

Product Features:

FRD 10BL 8.8 R/P 4.10A MG

from

$14.99

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
Formulated to help prevent gear wear and protect against rust and corrosion
Formulated to deliver enhanced protection against deposits
Helps provide better protection during extreme operating conditions

from

$34.99

Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$11.79

Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$96.99

Product Features:

FRD 8.8″ INT. KIT 31 SPL OPEN 1987 & LATER ONLY

from

$23.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$5.99

Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$137.99

MASTER KIT FORD 8.8″

from

$31.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$48.99

A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.

Product Features:

Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles.
Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$8.49

High-quality Differential Carrier Shim Kit

Product Features:

CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON

from

$39.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$4.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$32.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$37.99

DIFF COVER KIT

from

$19.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$63.99

Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles.
Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid.
Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$6.99

Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.

Product Features:

35 spline
8 x 3.96″ bolt pattern
Cut to length design fits 40″-43.5″ applications
Fits Dana Spicer 60, 70 and 80

from

$5.99

This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles.
Required replacement – when servicing the differential
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.99

Product Features:

Brand may vary by location

from

$12.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$9.99

Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:

Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
0.480″ tall

from

$10.99

Ford 9.75″ ring gear bolt. 12mm x 1.25.

Product Features:

Ring gear bolt for Ford 9.75″
12mm x 1.25

from

$11.99

Pinion gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:

Pinion gear thrust washer for Ford 8.8″
0.875″ diameter cross pin shaft applications only

from

$8.99

Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:

Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear

from

$5.99

Ford 7.5″ & 8.8″ ring gear bolt, standard Open & TracLoc. 7/16″ x 20.

Product Features:

Ring gear bolt for Ford 7.5″ and 8.8″
7/16″ x 20

from

$7.99

Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:

Pinion nut for Ford 7.5″, 8″ and 9″
3/4″ x 20 thread
1 1/6″ socket

from

$1.99

Product Features:

Ford 7.5″, 8.8″ Ring Gear Bolt

from

$209.99

Product Features:

Spider gear kit
Fits Ford 8.8″ 31 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$26.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$99.99

Yukon outer stub axle for Chrysler 9.25″ front. This axle uses a 1485 u/joint and has 33 splines.

Product Features:

Fits Ford 8.8″
Steel

from

$228.99

Product Features:

FRD 10BL 8.8 R/P 4.10 MG

from

$134.99

Fits Ford 8.8″
Includes carrier bearings and races and “super” carrier shim kit

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$99.99

Product Features:

Trac Loc spring for Ford 8.8″
31 spline applications only

from

$74.99

Chrome cover for 8.8″ Ford.

Product Features:

Fits Ford 8.8″
Chrome

from

$35.99

Product Features:

MINI INSTALL KIT FORD 8.8

Most Sold 2006 Lincoln Mark LT Drive Shafts and Axles

Explore our best-selling Lincoln parts for the 2006 Mark LT among 34 OEM and aftermarket options starting from $6.49.

show more show less

from

$20.29

Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.49

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$10.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$42.99

from

$44.99

from

$133.99

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$7.99

Wheel Lug Stud

from

$8.99

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
.150″ thick

from

$481.99

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$39.99

Stub axle snap ring clip for 8.8″ Ford IFS.

Product Features:

Stub axle snap ring
Fits Ford 8.8″ IFS

from

$17.29

Low swell in hydrocarbon fluids
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Recognized worldwide for their quality and reliable performance for every type of repair
Temperature range: -40°F to 225°F; -40°C to 107°C

from

$16.99

9.75″ Ford C-Clip.

Product Features:

C-clip
Fits Ford 9.75″

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$286.99

Yukon flange yoke for 8.8″ Ford passenger and 8.8″ Ford IFS truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 8.8″
30 spline
Round companion flange
4.3″ O.D.

from

$201.99

Designed to meet or exceed OE specifications for fit, form and function
100% new axle and components
New axle nut or attaching hardware included when applicable
Bearings, races and housings are heat-treated for longer life
Precision-engineered seal mating surfaces for leak-free performance
High moly CV joint grease with stainless-steel boot bands

from

$1035.99

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$888.99

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$861.99

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$676.99

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$569.99

Built to match O.E. form, fit and function.
100% NEW universal joints are installed to ensure proper fit and optimal performance.
All slip yokes are lubricated to prevent premature wear.
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

from

$221.99

Yukon yoke for Ford 8.8″ truck U/joint size (5″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 8.8″
30 spline
Round companion flange
5.00″ O.D.

from

$111.99

AXLE SHAFT REPAIR BE

from

$97.49

Wheel Bearing

from

$47.99

Plug adapter for extra-large clamshell. No Return.

Product Features:

Plug adapter for Extra Large clamshell
Fits carrier bearing puller

from

$44.07

Dorman’s Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.

Product Features:

Direct replacement for a proper fit every time
High quality steel construction
Conveniently available in many styles and in packs of different quantities
Dorman’s Spindle Nuts are constructed to strict engineering quality standards

from

$36.66

Spindle Nut

from

$35.49

AXLE BEARING

from

$14.46

Diff. Bearing Shaft

from

$14.20

SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:

Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
The flanged design allows for easier and proper installation and helps avoid cocking.
The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.

from

$12.49

BEARING

from

$11.40

Wheel Seal

from

$10.79

Product Features:

Brand may vary by location

from

$6.49

Product Features:

Brand may vary by location

Top-Rated Drivetrains Brands For Your 2006 Lincoln Mark LT

Shop for the best-rated brands offering Drivetrains and other products for your 2006 Lincoln Mark LTs. Below you’ll find some of our best rated Drivetrains from Valvoline, Moog, and Dorman, and more. Drivetrains from these brands that fit a 2006 Mark LT start at just $5.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2006 Lincoln Mark LT Drivetrains

When it comes to maintaining or upgrading your 2006 Lincoln Mark LT, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2006 Lincoln Mark LT. With over 6 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.49, with an average price of just $27.99. Plus, with over 419 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$19.99

This product is not rated

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart

“”

from
$12.49

This product is not rated

High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart

“”

from
$14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”

Popular Moog 2006 Lincoln Mark LT Drivetrains

Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 2006 Lincoln Mark LT owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2006 Mark LT, Advance Auto Parts carries a full inventory of 6 Moog Drivetrains. Plus you will be keeping your Lincoln in peak condition while saving money because prices on these Moog Drivetrains range from $19.99 to $41.99, plus, with more than 292 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from
$36.99

(41)

Greaseable Super Strength Universal Joint

“Easy install and great way to have sting durability with access to grease points”

from
$32.99

(30)

Non-Greaseable Super Strength Universal Joint

“Working great.”

from
$25.99

(143)

Greaseable Premium Universal Joint

“Good product”

FAQs for 2006 Lincoln Mark LT Drivetrains

Which Drivetrains are best-sellers for 2006 Lincoln Mark LTs?

Out of 339 Drivetrains that fit 2006 Lincoln Mark LTs, the following parts are the top sellers:

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (12079201) – $14.49
Greaseable Premium Universal Joint (10086740) – $25.99
4WD Locking Hub Actuator (10243421) – $111.99

What’s the price range for 2006 Lincoln Mark LT Drivetrains?

Drivetrain prices for the 2006 Lincoln Mark LT start at $1.99 and go up to $1,958.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2006 Lincoln Mark LT?

The average price for Drivetrains for the 2006 Lincoln Mark LT is $211.09. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Lincoln Mark LT model years?

Yes, we currently carry Drivetrains for 2 model years of Lincoln Mark LTs between 2007 and 2008. Drivetrains are bought most frequently for the following model years: 2008 and 2007.

What are the cheapest Drivetrains for my 2006 Lincoln Mark LT?

The cheapest 2006 Lincoln Mark LT Drivetrains we carry in stock are:

Ring Gear Bolt (20520509) – $1.99
Universal Joint (18270063) – $2.59
Universal Joint (5270189) – $4.59
Oil Seal (5440211) – $4.79
Oil Seal (5442613) – $4.79

What are the top-rated Drivetrains that fit the 2006 Lincoln Mark LT?

Out of 1,178 reviews by customers, our 2006 Lincoln Mark LT Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2006 Lincoln Mark LT and their top-rated products:

Universal Joints
- Universal Joint (10854997) – $39.99
- Universal Joint (18270063) – $2.59
- Greaseable Premium Universal Joint (10086740) – $25.99
4WD Components
- Universal Joint (10854997) – $39.99
- Universal Joint (18270063) – $2.59
- Greaseable Premium Universal Joint (10086740) – $25.99

What types of Drivetrains do you sell for my 2006 Lincoln Mark LT?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2006 Lincoln Mark LT:

Can I get help with 2006 Lincoln Mark LT Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lincoln Drivetrains and more.

What is your return policy for Lincoln Mark LT Drivetrains?

Advance Auto Parts keeps returns simple. For new Lincoln Mark LT Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Lincoln Mark LT Drivetrains

Motorcraft – 4WD Actuator Valve (Part No.J7603674059MTR)

Dorman – Transfer Case Motor (Part No.J7100700382DOR)

Driveworks – Tapered Roller Bearing (Part No.S-HM-89443)

Neapco – Universal Joint (Part No.1-0025)

Dorman – Differential Clutch Kit (Part No.697-781)

Felpro – Transfer Case Adapter Gasket (Part No.55484)

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

USA Standard Gear – Master Overhaul Kit for the ’00-’10 Ford 9.75" Differential (Part No.37087)

Dorman – Differential Pinion Yoke Assembly (Part No.697-532)

Yukon Gear – Ford 7.5" & 8.8" Ring Gear Bolt, Standard Open & Tracloc (Part No.33053)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

Yukon Gear – Ford 8.8" Reverse Oil Baffle (Part No.33006)

Dorman – Transfer Case Gasket (Part No.917-522)

Motive Gear – Differential Super Bearing Kit – Timken (Part No.R8.8RSKTT)

Carquest Premium – 4WD Switch (Part No.FWC1046)

Driveworks – Oil Seal (Part No.S-4278)

Yukon Gear – Pinion Gear And Thrust Washer For 9.75" Ford (Part No.33302)

Yukon Gear – C/Clip (Part No.33083)

Yukon Gear – Pinion Nut (Part No.33147)

EMPI – RE CV Joint Boot Kit (Part No.K6010182736EMP)

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Yukon Gear – Dura Grip Positraction For Ford 8.8" With 28 Spline Axles (Part No.26005)

Yukon Gear – 7.5", 8", 8.8", 9", 10.25" Ford Redi Sleeve Yoke Saver (Part No.30226)

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-2011)

National – Bearings (Part No.HK-1816)

USA Standard Gear – Standard Spider Gear Set For Ford 8.8" Trac Loc Posi, 31 Spline (Part No.39032)

Spicer – Universal Joint (Part No.5-213X)

Neapco – Universal Joint (Part No.1-0025)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

Driveworks – Universal Joint (Part No.DW-354)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.232)

Driveworks – Universal Joint (Part No.DW-331)

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.331)

Brute Force – Universal Joint (Part No.2-0053BF)

Neapco – Universal Joint (Part No.2-4801)

Neapco – Universal Joint (Part No.2-4800)

Driveworks – Universal Joint (Part No.DW-270)

Brute Force – Universal Joint (Part No.2-4800BF)

Neapco – Universal Joint (Part No.2-0053)

Spicer – Universal Joint (Part No.5-1330X)

Yukon Gear – Flange Yoke For Ford 9.75" (Part No.41066)

Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)

Spicer – Universal Joint (Part No.5-3203X)

Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

GMB – Universal Joint – Greasable (Part No.K1010481404GMB)

SKF – U Joint (Part No.K10101318583SKF)

Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

Spicer – Universal Joint (Part No.5-1350-1X)

Spicer – Universal Joint (Part No.5-1330-1X)

Neapco – Universal Joint (Part No.2-0052)

Yukon Gear – DrvShftPinYoke (Part No.33574)

National – Bearings (Part No.M88048)

National – Bearings (Part No.M88010)

Dorman – Transfer Case Shift Motor (Part No.600-911)

National – Multi Purpose Seal (Part No.4503N)

Cardone – Remanufactured Transfer Case Motor (Part No.48-208)

Dorman – Transfer Case Gasket (Part No.917-522)

Driveworks – Oil Seal (Part No.S-3946)

Felpro – Transfer Case Adapter Gasket (Part No.55484)

National – Multi Purpose Seal (Part No.710664)

Dorman – Transfer Case Motor (Part No.J7100700382DOR)

EVO Driveline – Transfer Case Assembly (Part No.UMT420-2M1)

EVO Driveline – Remanufactured Transfer Case (Part No.UMT420-2)

EVO Driveline – Transfer Case Motor (Part No.UMM4408)

USA Standard Gear – TRANSFER CASE PARTS (Part No.72057)

USA Standard Gear – TCaseBrg-SealKit (Part No.76401)

SKF – Trans Case Output Sh (Part No.J7121223394SKF)

Timken – Trans Case Output Sf (Part No.J7121366772TIM)

FAG US – BEARING (Part No.6208-C3)

SKF – Trans Case Output Sh (Part No.J7121366773SKF)

FAG US – CUP (Part No.M88010)

Autopart International Inc – Trans Case Output Sh (Part No.J71212043276API)

USA Standard Gear – TCaseOutputShaftSeal (Part No.72252)

USA Standard Gear – TCaseInputShaftSeal (Part No.75651)