2006 Jeep Wrangler Vehicle Hoods

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install

New CAPA Certified Premium Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)

Product Features:

• With One Washer Hole (Replaces Two Hole Version), Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This black UV treated plastic ram air induction scoop forces more air into your Jeep ventilation system to increase interior ventilation up to 60 percent. Installs over factory hood vent without drilling. For maximum air flow, the scoop should be mounted

Product Features:

• Black
• UV Treated
• Easy to Install
• Uses Automotive Grade Double Sided Tape
• Limited 5 Year Warranty

The new JK Hood Louvers from Rugged Ridge mount to the factory JK hood and are designed to provide more ventilation surface area to assist with reducing heat build-up in the engine compartment. Our hood louvers promote proper airflow through and out of th

Product Features:

• Primer
• Paintable
• Black Stainless Hardware
• Increase Air Flow
• Use w/ 17759.xx Hoods

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

This hood lock kit includes two keys and features a special design that virtually disappears into the grille without taking away from the appearance of your Jeep’s front-end. These clever applications install in minutes. An upgraded internal lock cover ke

Product Features:

• Hidden Behind Grille
• Keeps Your Jeeps Hood Locked
• Internal Lock Cover
• Easy to Install
• Limited 5 Year Warranty

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Is the hood to cowl seal deteriorating on your 97-06 Jeep Wrangler? You can tell by checking to see if the seal is brittle and weathered; or maybe your hood could be rattling. If so, it is time to replace it with the Omix-ADA OE replacement hood to cowl s

Product Features:

• Direct OE Replacement
• Built To Original Specifications
• 5 Year Limited Warranty

This complete eight piece hood kit from Rugged Ridge includes all necessary mounting hardware. Constructed of prime 304 stainless steel that has been polished to a mirror finish, these accessories are built to last. 304 stainless steel is virtually rust p

Product Features:

• Stainless Steel
• 8 Piece Kit
• Includes Hardware
• Limited 5 Year Warranty

This stainless steel 9-piece hood kit is constructed of prime 304 stainless steel that has been polished to a mirror finish. 304 stainless steel is virtually rust proof guaranteeing that these parts will stand the test of time. All hardware is also constr

Product Features:

• Stainless Steel
• 9 Piece Kit
• Includes Hardware
• Limited 5 Year Warranty

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1987-1995 Wrangler, Liftgate Support Strut (Shock), LH or RH

Hatch Strut

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Rubber Construction
• Meets Quality Standards
• Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
• Easy To Install

This hood stop support is designed to match the fit and function of the original support on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this hood stop support is designed to match the fit and function of the original support on specified vehicles
• Restores functionality – reliable replacement for an original support that has failed due to collision damage or has cracked from fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Bumper; Hood to Fend

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Single
• OE Style
• Direct Fit
• Limited 5 Year Warranty

This pair of hood hinges from Rugged Ridge comes in a semi-gloss black powder-coated finish to protect your investment against the elements. Hardware included ensuring a trouble free installation.

Product Features:

• Black
• OE Style
• Direct Fit
• Includes Hardware
• Limited 5 Year Warranty

Product Features:

• Limited 12 Month Warranty Or Limited 12,000 Mile Warranty

This pair of hood hinges from Rugged Ridge comes in a semi-gloss black powder-coated finish to protect your investment against the elements. Hardware included ensuring a trouble free installation.

Product Features:

• Black
• OE Style
• Direct Fit
• Includes Hardware
• Limited 5 Year Warranty

Screw; Hood Bumper S

New Economy Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)

Product Features:

• With One Washer Hole (Replaces Two Hole Version), Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Hood Panel, With 2 Washer Nozzles, Without Power Bulge

Product Features:

• With 2 Washer Nozzles, Without Power Bulge, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle