2006 Jeep Wrangler Bumpers
More 2006 Jeep Wrangler Bumpers
Find your specific 2006 Jeep Wrangler original or aftermarket Bumpers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2006 Jeep Wrangler Bumpers
KAI – Driver Side Rear Bumper End (Part No.CH1104140)
from
$28.99
New Standard Replacement Driver Side Rear Bumper End
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rugged Ridge – Bumper Ends (Part No.11540.23)
from
$165.99
The stubby ends from Rugged Ridge feature a tough off road look while providing greater tire clearance for lifted Jeeps. The beefy black powder coated steel end caps extend out to the edge of the grille to offer protection, but leaves the wheel wells open
Product Features:
See More
Product Features:
- Textured Black
- Added Protection
- Modular Design
- Bolt-on
- Limited 5 Year Warranty
KAI – Bumper Face Bar (Part No.CH1002251)
from
$121.99
New Economy Replacement Front Bumper Face Bar, Black
Product Features:
See More
Product Features:
- Black, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Bumper Face Bar (Part No.LKQ3260904)
from
$394.99
New Standard Replacement Front Bumper, Chrome
Product Features:
See More
Product Features:
- Chrome, Made Of Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rugged Ridge – Front Bumper Cover (Part No.11540.26)
from
$68.99
Are you looking for protection or Rugged Ridge D rings? This pair of European styled XHD bumper tow point covers feature a hard-wearing injection molded plastic design that matches the factory one for an overall integrated look. For use with 11540.10 and
Product Features:
See More
Product Features:
- Textured Black
- European Style
- Easily Removable
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – Black, Plastic, Front Right (Part No.55155756AB)
from
$17.49
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Omix – Bumper Extension (Part No.12031.07)
from
$30.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Plastic
- OE Style
- Direct Fit
- Left Side
- Limited 5 Year Warranty
Rugged Ridge – Tubular Bumper End Cap (Part No.11525.01)
from
$10.49
This three inch round black plastic tubular bumper end caps from Rugged Ridge presses in easily and will replace your missing caps for a completed look. Will fit most three inch tube bumpers. Sold individually.
Product Features:
See More
Product Features:
- Black Plastic
- Press In
- Will Fit Most 3 in. Tube Bumpers
- Sold Individually
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – Oem Replacement (Part No.55155761AA)
from
$28.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Limited 12 Month Or 12,000 Mile Warranty
Rugged Ridge – D-Ring (Part No.11235.01)
from
$53.99
This pair of galvanized 3/4-inch D-shackles from Rugged Ridge is rated to 9,500 lbs. and provides everything you’ll need for recovering stuck Jeeps. Featuring a strong and sturdy construction, their natural high quality stainless steel finish gives them a
Product Features:
See More
Product Features:
- Silver with Red Pin
- 9500Lb Pull Capacity
- Galvanized Steel
- Pair
- 3/4 in.
Rugged Ridge – Xtreme Heavy Duty Front Bumper (Part No.11540.40)
from
$715.99
No other bumper can give your Jeep this many looks! The most versatile bumper system ever created, the XHD Modular Bumper System provides dozens of different looks and styles so you can customize your bumper the way you like it. This black powder-coated c
Product Features:
See More
Product Features:
- Textured Black
- Aluminum
- Modular Design
- Winch Plate
Rugged Ridge – Front Bumper (Part No.11563.03)
from
$787.99
Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate
Product Features:
See More
Product Features:
- Stainless Steel
- With Raiser and Winch Cut Out
- Welded End Caps
- Limited 5 Year Warranty
Rugged Ridge – Front Bumper (Part No.11560.03)
from
$586.99
Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate
Product Features:
See More
Product Features:
- Gloss Black
- With Raiser and Winch Cut Out
- Welded End Caps
- Limited 5 Year Warranty
Omix – Bumper Extension Set (Part No.12031.04)
from
$31.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Pair
- OE Style
- Direct Fit
- Plastic
- Limited 5 Year Warranty
Rugged Ridge – Xtreme Heavy Duty; Bumper End Caps (Part No.11540.42)
from
$165.99
Looking to add some versatility and style to your Wrangler? No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles so you can build the exact bumper of your choice!
Product Features:
See More
Product Features:
- Textured Black
- Added Protection
- Modular Design
- Bolt-on
- Limited 5 Year Warranty
Rugged Ridge – Xtreme Heavy Duty Rear Bumper (Part No.11547.01)
from
$914.99
Taking the light weight theme further, we have developed steel inner framed Aluminum Rear Bumper Pods. These new lightweight Pods still allow for over sized tires but take a huge chunk of weight out of the bumper. (The picture shows the rear pods installe
Product Features:
See More
Product Features:
- Textured Black
- Greater Approach Angle
- Modular Design
- Can Still Use The XHD Tire Carrier
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – One Piece Design, Direct Fit, Uses OE Mounting Hardware, Painted Black Steel (Part No.5ED18T3X)
from
$107.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Omix – Bumper; Rear (Part No.12033.03)
from
$238.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Black
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Rampage – Rear Recovery Bumper, Textured Finish, Lights Sold Separately (Part No.88605)
from
$839.99
Product Features:
See More
- Steel Rear Bumper With 4 Inch Light Receptacles
- Recessed Area For Oversized Tire Clearance
- Textured Black Finish
- Secures With Heavy Duty Latch
- Custom Welded Shackle Mounts
- 1 inch D Rings Included
Rugged Ridge – 3.5-Inch Bull Bar; B (Part No.11564.03)
from
$517.99
3.5-Inch Bull Bar; B
KAI – Driver Or Passenger Side Front Bumper Guard (Part No.CH1054149)
from
$69.99
New Standard Replacement Driver Or Passenger Side Front Bumper Guard
Product Features:
See More
Product Features:
- Made Of Rubber, Poly(Acrylic Acid Ester)
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Westin – MAX Winch Tray Bull Bar Light Mount (Part No.46-43635)
from
$77.99
Westin(TM) MAX(TM) Winch Mounting Systems are made to maximize your options for functional style. The MAX(TM) Winch Tray is suitable for the mounting of most major brand winches. The MAX(TM) System gives you the option of adding a MAX(TM) Bull Bar/Light B
Product Features:
See More
Product Features:
- Features 3 in. Tube
- Accommodates Three 8 in. Lights
- No Drill Installation
- Winch Tray Sold Separately
- 3 Year Warranty
Rugged Ridge – Spartacus Front Bump (Part No.11544.22)
from
$277.99
Spartacus Front Bump
Crown Auto Jeep Replacmnt – 1-Piece, Direct-Fit, Painted Black Steel, Without Tow Hook Mounts/D-Ring Mounts (Part No.5ED16T3X)
from
$97.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Westin – WJ2 Full Width Front Bumper (Part No.59-80035)
from
$854.99
Westins WJ2 Bumper is constructed with high-strength 3/16-inch plate steel. Our WJ2 Bumper improves ground and tire clearance while offering corner light mount points and rock light mount points, plus 2 side and 2 front off-road jack points. Your winch fits down inside the bumper to allow maximum air flow to your vehicles radiator and the WJ2 Bumper includes pre-drilled holes to allow installation of a winch while the bumper is already installed on your Jeep – most other brands wont! Features recovery hooks with a recovery shackle mounting point to allow easy tow strap attachment. Bolt-on installation so no drilling is required. Recommended optional skid plate sold separately. Includes bumper, mounting hardware and install instructions.
Product Features:
See More
Product Features:
- Rock Light Mount Points
- Bolt On Installation; No Drill Required
- Integrated Recovery Shackle Mount Points
- Includes Bumper; Mounting Hardware And Install Instructions
- Designed To Work With Factory Or Westin Hitches
- Auxiliary Light Mount Points
- 2 Off-Road Jack Points
- 0.1875 in. Plate Steel Construction
Rugged Ridge – Front Bumper (Part No.11560.02)
from
$253.99
Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Each front bumper has two welded light tabs for easy mounting of offroad lighting.
Product Features:
See More
Product Features:
- Gloss Black
- Without Raiser
- Welded End Caps
- Limited 5 Year Warranty
Westin – WJ2 Full Width Front Bumper (Part No.59-80115)
from
$996.99
Westins WJ2 Full Width Front Bumper with Bull Bar is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The Bull Bar on our new WJ2 Stubby Bumper is designed to mount and protect your light bar. The product is designed to utilize both styles of factory fog lights or round post lights. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.
Product Features:
See More
Product Features:
- Bumper Made Of 0.1875 in. Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points For Post Mount Square Lights
- Rock Light Mount Points On Lower Bumper Corners
- Bottom Frame Mount Prevents Bumper From Rotating
- 2 Off-Road Jack Points
- Bolt On Installation; No Drill Required
- Includes Bumper; Mounting Hardware And Install Instructions
Rugged Ridge – Spartan Front Bumper (Part No.11548.71)
from
$711.99
Spartan Front Bumper
Popular 2006 Jeep Wrangler Bumpers Categories
2006 Jeep Wrangler Bumpers
Maybe you’re in the middle of a full rebuild of that 2006 Jeep Wrangler. Maybe you just need a couple of Bumpers. Either way, Advance Auto Parts has 41 different Bumpers in our inventory ranging from $3.79 to $823.99. That means you can find the exact parts or products you need to keep that 2006 Jeep Wrangler running smoothly.
Bumpers are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Jeep Wrangler. Omix, Rugged Ridge, and Crown Auto Jeep Replacmnt are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bumpers for your 2006 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bumpers to keep your 2006 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bumpers Brands To Make Your 2006 Jeep Wrangler Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Bumpers make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Bumpers brands and parts.
Popular Crown Auto Jeep Replacmnt Bumpers
We carry Crown Auto Jeep Replacmnt parts in our stock across Bumper Corners and Front Bumper Covers categories, plus more. For a 2006 Jeep Wrangler, our most popular Crown Auto Jeep Replacmnt Bumpers include:
FAQs for 2006 Jeep Wrangler Bumpers
What are the most purchased Bumpers for the 2006 Jeep Wrangler?
Out of 41 Bumpers for the 2006 Jeep Wrangler, the most popular in our inventory are:
