2006 Jeep Grand Cherokee Steering and Chassis Parts
More 2006 Jeep Grand Cherokee Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2006 Jeep Grand Cherokee, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2006 Jeep Grand Cherokee Steering and Chassis Parts
Monroe – Magnum Steering Damper (Part No.SC2928)
from
$52.99
The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.
Product Features:
See More
Product Features:
- 1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
- All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
- Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
- Micro-Cellular Gas Design Allows unit to be mounted horizontally.
- Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
- Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Carquest Premium – Bulk – 11/32" ID Return Hose (J189) (sold by each) (Part No.34996)
from
$5.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Stabilizer Bar Link Kit (Part No.512-497183)
from
$42.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Rare Parts – Ball Joint (Part No.RP13110)
from
$391.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Full Ball Stud Pitman Arm end
- Greaseable
- Self aligning no bind design
- Low friction
MOOG – Track Bar Bushing (Part No.K3147)
from
$26.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Omix – Power Steering Pressure Hose (Part No.18012.11)
from
$47.49
Is your Jeep’s power steering hose leaking? Tired of adding fluid? Omix-ADA offers high-quality replacements that will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Withstands High Oil Temperatures
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Screw; Trim Panel; 9 (Part No.11840.04)
from
$4.49
Screw; Trim Panel; 9
Driveworks – Suspension Ball Joint Kit (Part No.DW-K7403)
from
$39.99
Suspension Ball Joint Kit
MOOG – Control Arm and Ball Joint Assembly (Part No.RK621608)
from
$162.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
- GREASEABLE SOCKETá–┐Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants┐
- HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installationá
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
MOOG – Stabilizer Bar Bushing Kit (Part No.K3168)
from
$17.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Driveworks – Steering Tie Rod End (Part No.DW-ES3095R)
from
$37.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Omix – POWER STEERING PUMP; (Part No.18008.10)
from
$451.99
POWER STEERING PUMP;
MOOG – Stabilizer Bar Bushing Kit (Part No.K201428)
from
$42.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
PWR – New Hydraulic Power Rack and Pinion (Part No.42-2099)
from
$1037.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Rack and Pinions are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
Dorman – Power Steering Pump Pulley (Part No.300-302)
from
$34.49
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Rare Parts – Tie Rod End (Part No.RP29312)
from
$113.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Omega – P/S Return Hose (Part No.M2016523948OME)
from
$49.50
P/S Return Hose
Driveworks – DRAG LINK 1 EA DRIVE (Part No.DW-DS1235)
from
$66.99
Driveworks Brand drag links are part of a 4-bar steering linkage. Replace worn drag links for smooth, safe operation and an improved ride. The drag links help eliminate erratic steering and promote positive front-end adjustment. Driveworks Brand chassis p
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
MOOG – Track Bar (Part No.RK660154)
from
$75.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
Powercraft – Rack Pinion Seal Kit (Part No.9160)
from
$164.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8554)
from
$21.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Omix – Power Steering Seal Kit (Part No.18010.04)
from
$9.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Complete Kit
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Power Steering Pressure Hose (Part No.18012.19)
from
$79.99
Is your Jeep’s power steering hose leaking? Tired of adding fluid? Omix-ADA offers high-quality replacements that will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Withstands High Oil Temperatures
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Power Steering Pressure Hose (Part No.18012.14)
from
$55.99
Is your Jeep’s power steering hose leaking? Tired of adding fluid? Omix-ADA offers high-quality replacements that will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Withstands High Oil Temperatures
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Power Steering Return Hose (Part No.18014.09)
from
$25.49
Is your Jeep’s power steering hose leaking? Tired of adding fluid? Omix-ADA offers high-quality replacements that will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Synthetic Rubber
- OE Style
- Direct Fit
- Oil Resistant
- Limited 5 Year Warranty
Popular 2006 Jeep Grand Cherokee Steering and Chassis Parts Categories
2006 Jeep Grand Cherokee Steering and Chassis Parts
You count on your 2006 Jeep Grand Cherokee to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 86 Steering and Chassis Parts ranging in price from $2.99 to $1,037.99, you’re sure to find everything you need for your 2006 Jeep Grand Cherokee.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 16 different brands like Imperial, Carquest Premium, and Cardone. 2006 Jeep Grand Cherokee Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 1,939 extensive product reviews on 2006 Jeep Grand Cherokee Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Control Arm and Ball Joint Assembly with 4.3 stars and Steering Stabilizer with 4.4 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2006 Jeep Grand Cherokee below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2006 Jeep Grand Cherokee
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Jeep Grand Cherokee running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.
Popular Carquest Premium Steering and Chassis Parts
You’ll find popular Carquest Premium brand products across Power Steering Parts and Sway Bars. All are waiting to get your 2006 Jeep Grand Cherokee back on the road. Some of the top-rated Carquest Premium products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2006 Jeep Grand Cherokee, and some of our most reviewed Imperial parts include:
FAQs for 2006 Jeep Grand Cherokee Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2006 Jeep Grand Cherokee?
Out of 86 Steering and Chassis Parts for the 2006 Jeep Grand Cherokee, the most popular in our inventory are:
from
$2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
What are the top-rated 2006 Jeep Grand Cherokee Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2006 Jeep Grand Cherokee based on customer reviews/ratings are:
from
$44.99
(5)
Steering Stabilizer
“Would be helpful to have help instructions on how to remove old taper sleeve. Ended up applyiing heat to he sterring tie rod to release the tapered bo”
