2006 Jeep Grand Cherokee Performance and Racing Products
Find Your Specific 2006 Jeep Grand Cherokee Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 2006 Grand Cherokee. Advance Auto Parts has popular Grand Cherokee parts like Performance Engines, Performance Air Filters, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Grand Cherokee model years including
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021 and more. Select a category of 2006 Jeep Grand Cherokee Performance and Racing Products below and start saving instantly.
Popular 2006 Jeep Grand Cherokee Performance and Racing Products Categories
Essential Performance and Racing Products for 2006 Jeep Grand Cherokees
Omix – Exhaust Gasket; 226CI; 54-64 Jeep CJ Models (Part No.17450.06)
from
$4.49
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a bad exhaust pipe gasket. Omix-ADA offers high quality exhaust gaskets to solve the problem.
Product Features:
See More
Product Features:
- Composite
- Heat Resistant
- OE Style
- Direct Fit
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 17 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12602)
from
$414.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro 5R Filter For Maximum Air Flow
- Rotomolded Plastic Tube For Maximum Air Flow
- 32% cfm Flow Gain
- Improved Throttle Response
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942447)
from
$134.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2233)
from
$83.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Million Mile Air Filter (Part No.57-1513-1)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 25 Horsepower, With Million Mile Air Filter (Part No.57-1506-2)
from
$367.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.20-222-3)
from
$327.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Magnum 230/230 Hydraulic Flat Cam (Part No.20-232-4)
from
$297.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$399.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
Omix – Idle Air Control; 2.4L; 02-04 Wrangler/Liberty (Part No.17715.05)
from
$182.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Built To Meet Or Exceed OE Specifications
- OE Style
- Direct Fit
Omix – Intake Temp Sensor; 01-10 Jeep KJ/WJ/WK/TJ (Part No.17221.03)
from
$61.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Clip In
- OE Style
- Direct Fit
Rugged Ridge – Skid Plate; Differential; for Dana 30 (Part No.16597.30)
from
$123.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 Inch black powder coated steel, these skid plates will help you slide over obstacles.
Product Features:
See More
Product Features:
- Cast Steel
- Black Finish
Rugged Ridge – Skid Plate; Differential; Jeep logo; for Dana 35 (Part No.DMC-16597.35)
from
$193.99
Protect your factory differential cover with these heavy-duty skid plates. Designed to fit the contours of your stock differential cover with the distinctive Jeep logo etched into the steel, these heavy duty skids look great while providing extra protection.
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Steel
- Use w/ Factory Diff Cover
- Mounting Hardware Included
- Jeep Logo
Omix – Ignition Coil; 98-02 Jeep Wrangler TJ (Part No.17247.05)
from
$45.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- External Coil
- OE Style
- Direct Fit
MSD Ignition – Coil; 5.7/6.1L HEMI; 05-14; Single (Part No.8255)
from
$112.99
Fire up your late model hemi with a set of MSD’s blaster coils. The coils are a direct bolt-in and are spec’d with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.
Product Features:
See More
Product Features:
- Improved High RPM Operation
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- Secondary Current (mA): 56 mA
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Product Features:
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Omix – Thermostat 180 Degree; 41-71 Willys/Jeep Models (Part No.17106.02)
from
$8.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Steel
- Better Flow Control
Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)
from
$29.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 160 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully opens at Correct Temperature Consistently Regardless of engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Omix – Sway Bar Link (Part No.18283.22)
from
$29.99
Does your Jeep wander down the road or shift suddenly on turns? The rubber bushings in your sway bar end links may be worn out or missing. Omix-ADA offers replacement sway bar end links to keep your Jeep under control.
Product Features:
See More
Product Features:
- Steel
- With Bushing And Insert
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Sway Bar End Link; 91-01 Jeep Cherokee XJ (Part No.18280.11)
from
$29.99
Does your Jeep wander down the road or shift suddenly on turns? The rubber bushings in your sway bar end links may be worn out or missing. Omix-ADA offers replacement sway bar end links to keep your Jeep under control.
Product Features:
See More
Product Features:
- Includes Bushings
- OE Style
- Direct Fit
Energy Suspension – Sway Bar Bushing Set (Part No.2.5109G)
from
$38.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Flowtech – Header Gasket Set (Part No.99361FLT)
from
$20.99
Header Gasket Set
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.7594)
from
$49.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Omix – Manifold Gasket; 4.0L; 91-99 Jeep MJ/XJ/YJ/ZJ/TJ (Part No.17451.06)
from
$23.99
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, it’s time to replace the exhaust manifold gasket. Omix-ADA offers high quality exhaust manifold gaskets to solve the problem.
Product Features:
See More
Product Features:
- Composite
- Heat Resistant
- OE Style
- Direct Fit
Upgrade your 2006 Jeep Grand Cherokee with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2006 Jeep Grand Cherokee, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Grand Cherokee functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Performance and Racing Products for the 2006 Jeep Grand Cherokee, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Air Filters
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2006 Jeep Grand Cherokee at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $4.49 to $643.99, with
an average price of $211.94.
Our 32 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 2006 Jeep Grand Cherokee without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Jeep Grand Cherokee, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, Flowmaster Inc., Omix, and more.
K&N Performance and Racing Products
start at just $83.99 and boast an impressive 4.8 stars average rating from customers.
Flowmaster Inc. and Omix also bring quality to the table, with Performance and Racing Products available starting at $8.29, and at an average 4.4 stars rating.
With 950 customer reviews and counting, our 2006 Jeep Grand Cherokee Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2006 Jeep Grand Cherokee is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Cherokee in top shape, all in one place.
Start shopping confidently below for your 2006 Jeep Grand Cherokee!
Best-Selling Performance Engines for 2006 Jeep Grand Cherokees
Enhance the driving experience in your Jeep with 13 quality Performance Engine components, starting at $8.29.
Omix – Thermostat 180 Degree; 41-71 Willys/Jeep Models (Part No.17106.02)
from
$8.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Steel
- Better Flow Control
Competition Cams – XFI 208/212 HRLRHEMI (Part No.112-500-11)
from
$643.99
XFI 208/212 HRLRHEMI
Competition Cams – XFI 216/220 HRLRHEMI (Part No.112-501-11)
from
$643.99
XFI 216/220 HRLRHEMI
Competition Cams – TPX 254HR-15 (Part No.112-530-11)
from
$643.99
TPX 254HR-15
Competition Cams – TPX 262HR-14 (Part No.112-535-11)
from
$643.99
TPX 262HR-14
Competition Cams – XFI 224/228 HRLRHEMI (Part No.112-502-11)
from
$643.99
XFI 224/228 HRLRHEMI
Competition Cams – TPX 246HR-16 (Part No.112-525-11)
from
$643.99
TPX 246HR-16
Competition Cams – 7 Degree Steel Retainers Set 100 5.7/6.1 HEMI with 26915/26918 Beehive Spring (Part No.761-100)
from
$636.99
7 Degree Steel Retainers Set 100 5.7/6.1 HEMI with 26915/26918 Beehive Spring
Competition Cams – Hi-Tech Pushrods STock Length 5.7L HEMI – Intake and Exhaust (Part No.7914-16)
from
$283.99
Hi-Tech Pushrods STock Length 5.7L HEMI – Intake and Exhaust
Competition Cams – Hi-Tech 8.380" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8 (Part No.7969-8)
from
$121.99
Hi-Tech 8.380" Long, .080" Wall, 3/8" Diameter Pushrod Set of 8
Competition Cams – 7 Degree Steel Retainers for Chrysler 5.7/6.1 HEMI with 26915/26918 Beehive Spring (Part No.761-16)
from
$80.99
7 Degree Steel Retainers for Chrysler 5.7/6.1 HEMI with 26915/26918 Beehive Spring
Competition Cams – Flat 1 Piece Guide Plate Set for Dodge Magnum V8 with 5/16" Pushrod and 5/16" Stud (Part No.4825-8)
from
$24.99
Flat 1 Piece Guide Plate Set for Dodge Magnum V8 with 5/16" Pushrod and 5/16" Stud
Competition Cams – 7 Degree Steel Retainer for Dodge HEMI 5.7L with 26915/26918 Beehive Valve Spring (Part No.761-1)
from
$10.99
7 Degree Steel Retainer for Dodge HEMI 5.7L with 26915/26918 Beehive Valve Spring
Most Popular 2006 Jeep Grand Cherokee Performance Air Filters
Customize your Jeep with 1 Performance Air Filters products
like Performance Air Filters, all
priced under $83.99.
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2233)
from
$83.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
Top Picks for 2006 Jeep Grand Cherokee Performance Fuel Systems
Upgrade Jeep Grand Cherokees with top-quality Performance Fuel Systems parts, including 1 OEM and aftermarket selections for your 2006 model.
Omix – Intake Temp Sensor; 01-10 Jeep KJ/WJ/WK/TJ (Part No.17221.03)
from
$61.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Clip In
- OE Style
- Direct Fit
In-Demand Performance Oil Filters for 2006 Jeep Grand Cherokees
Select from 1 premium Performance Oil Filters parts for your 2006 Jeep Grand Cherokee.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Most Sold 2006 Jeep Grand Cherokee Performance Exhaust Products
Explore our best-selling Jeep parts for the 2006 Grand Cherokee among 3 OEM and aftermarket options starting from $4.49.
Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Center Outlet, 18in long, Non-Reversible, Moderate Sound (Part No.9530560)
from
$271.99
Designed primarily for today’s heavy duty gas and diesel trucks, this muffler will deliver improved performance, throttle response and mileage. Featuring a deeper, moderate tone with minimal resonance, it is ideal for trucks with modified engines. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Omix – Exhaust Gasket; 226CI; 54-64 Jeep CJ Models (Part No.17450.06)
from
$4.49
Are you smelling exhaust in your Jeep? Can you hear an exhaust leak? If so, you may have a bad exhaust pipe gasket. Omix-ADA offers high quality exhaust gaskets to solve the problem.
Product Features:
See More
Product Features:
- Composite
- Heat Resistant
- OE Style
- Direct Fit
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.7594)
from
$49.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Top-Rated Performance and Racing Products Brands For Your 2006 Jeep Grand Cherokee
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2006 Jeep Grand Cherokees. Below you’ll find some of our best rated Performance and Racing Products from K&N, Flowmaster Inc., and Omix, and more. Performance and Racing Products from these brands that fit a 2006 Grand Cherokee start at just $8.29 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2006 Jeep Grand Cherokee Performance and Racing Products
When it comes to maintaining or upgrading your 2006 Jeep Grand Cherokee, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2006 Jeep Grand Cherokee. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $83.99, with an average price of just $273.32. Plus, with over 37 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$83.99
(25)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
“Put it in wife’s jeep! For best performance and should never have to buy it again!”
from
$367.99
(10)
Cold Air Intake: Adds Up To 15 Horsepower, With Million Mile Air Filter
“I put this on my 05 Jeep Grand Cherokee Limited 5.7L it made the engine sound great made me want to floor it all the time. If you have a 5.7 Liter Hem”
from
$367.99
(2)
Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter
“This is on my 05 Grand Cherokee 3.7L. I love the gains this system give me very happy. I have had K&N filters on just about every car and truck I have”
Popular Flowmaster Inc. 2006 Jeep Grand Cherokee Performance and Racing Products
Flowmaster Inc. auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2006 Jeep Grand Cherokee owner should feel confident when installing genuine Flowmaster Inc. parts in their vehicle. To ensure the best fit and performance for your 2006 Grand Cherokee, Advance Auto Parts carries a full inventory of 1 Flowmaster Inc. Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Flowmaster Inc. Performance and Racing Products range up to $271.99, plus, with more than 1 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$271.99
(1)
50 Series Muffler, 3in Offset Inlet 3in Center Outlet, 18in long, Non-Reversible, Moderate Sound
“I installed it on my motorhome. I wanted performance and a great sound. I am not your average RVer, and neither is my motorhome.”
FAQs for 2006 Jeep Grand Cherokee Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2006 Jeep Grand Cherokees?
Out of 32 Performance and Racing Products that fit 2006 Jeep Grand Cherokees, the following parts are the top sellers:
- Drive Shaft Pinion Yoke (20520312) – $117.99
- 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (99991313) – $399.99
- Intake Temp Sensor; 01-10 Jeep KJ/WJ/WK/TJ (10186451) – $61.99
What’s the price range for 2006 Jeep Grand Cherokee Performance and Racing Products?
Performance and Racing Product prices for the 2006 Jeep Grand Cherokee start at $4.49 and go up to $643.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2006 Jeep Grand Cherokee?
The average price for Performance and Racing Products for the 2006 Jeep Grand Cherokee is $211.94. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Grand Cherokee model years?
What are the cheapest Performance and Racing Products for my 2006 Jeep Grand Cherokee?
The cheapest 2006 Jeep Grand Cherokee Performance and Racing Products we carry in stock are:
- Exhaust Gasket; 226CI; 54-64 Jeep CJ Models (10179709) – $4.49
- Thermostat 180 Degree; 41-71 Willys/Jeep Models (10186688) – $8.29
- 7 Degree Steel Retainer for Dodge HEMI 5.7L with 26915/26918 Beehive Valve Spring (50289116) – $10.99
- Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (6120012) – $17.99
- Flat 1 Piece Guide Plate Set for Dodge Magnum V8 with 5/16" Pushrod and 5/16" Stud (50288874) – $24.99
What are the top-rated Performance and Racing Products that fit the 2006 Jeep Grand Cherokee?
Out of 950 reviews by customers, our 2006 Jeep Grand Cherokee Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2006 Jeep Grand Cherokee and their top-rated products:
- Performance Air Filters
- Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (17400749) – $83.99
- Performance Oil Filters
- Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (17400749) – $83.99
What types of Performance and Racing Products do you sell for my 2006 Jeep Grand Cherokee?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 2006 Jeep Grand Cherokee:
Can I get help with 2006 Jeep Grand Cherokee Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Grand Cherokee Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Grand Cherokee Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
