2006 GMC Canyon Steering and Chassis Parts
More 2006 GMC Canyon Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2006 GMC Canyon, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2006 GMC Canyon Steering and Chassis Parts
MOOG – Front Upper Suspension Ball Joint (Part No.K80764)
from
$75.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Tie Rod End (Part No.ES800464)
from
$60.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Alignment Kit – Front (Part No.DW-K100026)
from
$46.99
Alignment Kit – Front
Dorman – Suspension Control Arm (Part No.527-035)
from
$232.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Sway Bar Fr Bush (Part No.RP16963)
from
$23.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
MOOG – Alignment Guide Pin (Part No.K100206)
from
$71.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Torsion Bar Load Kit (Part No.T40016)
from
$181.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- High quality construction
- Saves time on installation
- For both professionals and DIYers
- Designed for use on cars and light trucks
- Incorporates proven design and engineering features
MOOG – Stabilizer Bar Bushing Kit (Part No.K201294)
from
$18.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Carquest Premium – 3/8 Cap Seal – .370 (Part No.70018)
from
$30.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More
Carquest Premium – Air Bag Connector (Part No.PTA2152)
from
$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed for the OE distributor as a direct replacement part
Dorman – Power Steering Pump Pulley (Part No.300-141)
from
$47.99
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Stabilizer Bar Link Kit (Part No.510-96783)
from
$51.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$13.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Rack Pinion Seal Kit (Part No.8997)
from
$99.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Cardone – Power Steering Pump (Part No.20-989)
from
$94.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Driveworks – Ball Joint (Part No.DW-K80984)
from
$57.99
Ball Joint
Dorman – Propeller Shaft CV Joint Kit (Part No.932-105)
from
$204.99
This drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to collision damage, water infiltration or road debris contamination
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MOOG – Caster/Camber Adjusting Kit (Part No.K100026)
from
$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Dorman – Lower Steering Shaft (Part No.425-105)
from
$135.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Cardone – Rack and Pinion Assembly (Part No.22-1038)
from
$296.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Carquest Premium – Pressure Hose Assembly (Part No.37568)
from
$86.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
MOOG – Caster/Camber Adjusting Kit (Part No.K100159)
from
$72.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Powercraft – Pump Seal Kit (Part No.8624)
from
$26.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Rack & Pinion Bellows Kit (Part No.K150289)
from
$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Popular 2006 GMC Canyon Steering and Chassis Parts Categories
2006 GMC Canyon Steering and Chassis Parts
You count on your 2006 GMC Canyon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 121 Steering and Chassis Parts ranging in price from $2.99 to $911.99, you’re sure to find everything you need for your 2006 GMC Canyon.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 14 different brands like Imperial, Moog, and Cardone. 2006 GMC Canyon Steering and Chassis Parts start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 2,136 extensive product reviews on 2006 GMC Canyon Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Tie Rod End with 5.0 stars and Alignment Kit – Front with 4.9 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2006 GMC Canyon below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2006 GMC Canyon
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 GMC Canyon running right for years to come. In our inventory you’ll find brands like Imperial, Moog, Cardone, and even more.
Popular Dorman Steering and Chassis Parts
You’ll find popular Dorman brand products across Ball Joints. All are waiting to get your 2006 GMC Canyon back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2006 GMC Canyon, and some of our most reviewed Imperial parts include:
FAQs for 2006 GMC Canyon Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2006 GMC Canyon?
Out of 121 Steering and Chassis Parts for the 2006 GMC Canyon, the most popular in our inventory are:
What are the top-rated 2006 GMC Canyon Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2006 GMC Canyon based on customer reviews/ratings are:
