from

$75.99

Constructed with 100-percent polyurethane boxed frame, this high flow, oiled OE replacement performance filter will outflow the stock filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Product Features:

High Flow For Increased Performance
Progressive 5 Layer Cotton Gauze Material
Deep Cotton Pleats for Increased Flow
Progressive Bump Seal For Leak-Free Seal

from

$26.99

Replacing an air filter every 12 months or 12,000 miles can have a significant impact on engine performance and efficiency. PurolatorONE┐ Air Filters trap up to 99% of dirt, dust, soot and other debris, helping to protect your engine from damage. A new air filter may also help prevent engine wear, improve fuel efficiency and can even improve acceleration by up to 11% (U.S. DOE study). PurolatorONE Air Filters are widely available for most passenger cars and light trucks on the road today. Changing your air filter regularly is an easy way to keep your engine running at peak performance. Full synthetic or highly embossed media for superior strength and dirt holding capacity; Blocks up to 99% of damaging dirt, soot and debris from entering your engine. Optimizes engine airflow with precision fit polyurethane framingHelps improve acceleration and boost engine efficiency. Employs steel grid backing, ridge supports or polyamide high temperature glue beads to provide superior strength and stability. Meets or exceeds OE specifications; Trusted OE supplier

from

$18.99

Carquest Standard engine air filters are designed to remove airborne contaminants and optimize engine performance in all driving conditions. Each air filter features cured filter media that increases tensile strength, allowing the filter to maintain high-pressure requirements without collapse. Carquest Standard air filters use a polyurethane construction that provides higher tear strength and more structural support. Our Carquest Standard air filters meet original equipment (O.E.) standards and fulfill the requirements for maintaining a new vehicle warranty.

from

$41.99

Spectre’s High Performance Replacement Air Filters are engineered to outperform ordinary paper filters by providing increased air flow for improved performance. Manufactured using high quality materials including pre-dyed synthetic media, urethane, and steel mesh, this performance air filter is factory pre-oiled and ready to use.

Product Features:

High performance and high air flow filter
Filter media is non-woven synthetic and pre-dyed
Replaces stock air filter
Easy to install with no special tools or skills required
Reinforced with a steel mesh

from

$18.99

K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards.

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains

from

$7.79

Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.

Product Features:

Protection for up to 10,000 miles
Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
Solid metal end caps are designed to be long lasting
Silicone anti-drain back valve for engine start-up protection
Heavy-duty steel baseplate provides additional strength to resist leakage
Heavy gauge steel canister withstands high pressure operating conditions
Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
Meets requirements for maintaining new vehicle warranties

from

$17.99

PurolatorONE Oil FIlters keep engines operating at peak performance for up to 15,000 miles. Available for both domestic and import applications, PurolatorONE provides advanced engine protection for most vehicles on the road today. Made with a high-density synthetic blend filter media, PurolatorONE maintains its integrity and filtering capabilities between oil changes. Up to 15,000 miles – advanced engine protection; High-density synthetic blend media No metal components for easy recycling (as applicable). Premium gasket for leak-tight seal. Excellent Dirt Removal Power

Product Features:

Up to 15,000 miles – advanced engine protection
Ideal for all synthetic and high mileage oils
99% Dirt Removal Power
High-density synthetic blend media
Silicone anti-drainback valve prevents dry starts
PTFE treated gasket; Heat resistant – stays flexible for advanced leak protection
Metal end caps provide stability and integrity for greater wear resistance

from

$5.49

Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.

Product Features:

Protection for up to 5,000 miles
Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
Nitrile anti-drain back valve for engine start-up protection
Lathe cut nitrile sealing gasket prevents leaks
Double fluted spiral wound center tube allows maximum flow and provides additional strength
Solid steel baseplate provides additional strength to resist leakage
Meets requirements for maintaining new vehicle warranties

from

$36.49

GM Genuine Parts Automatic Transmission Filters are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These filters help capture abrasive particles such as metal shavings or debris caused by the transmission operation, preventing them from entering or blocking fluid flow that may cause damage to the transmission’s internal components. They deliver efficient filtration and outstanding fluid flow to and from your vehicle’s transmission. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Felt filter media helps deliver high-filtration efficiency and excellent fluid flow
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$42.99

Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:

Guaranteed OE quality form, fit and function
Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.

from

$32.99

ACDelco Gold (Professional) Automatic Transmission Filters are a high quality alternative to Original Equipment (OE) parts. These filters help capture abrasive particles such as metal shavings or debris caused by the transmission operation, preventing them from entering or blocking fluid flow that may cause damage to the transmission’s internal components. They deliver efficient filtration and outstanding fluid flow to and from your vehicle’s transmission. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Felt filter media helps deliver high-filtration efficiency and excellent fluid flow
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$57.99

Filter extension for B&M deep pan part number 70260 when used on a GM 4L60E automatic transmission. Lowers the filter to the bottom of the pan for improved fluid pick up on deeper than stock transmission oil pans.

Product Features:

Replacement Filter Extension
For Most B and M Deep Pans
Cast Aluminum
Aluminum
Extends length of filter tube

from

$95.99

For use when relocating the oil filter is necessary. Includes all required hardware except hoses.

Product Features:

Remote mount filter kit
For use when relocation of the oil filter is necessary
Comes with all necessary hardware except hoses

from

$30.99

Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:

Guaranteed OE quality form, fit and function
Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.

from

$40.99

AUTO TRANS FLTR KT

from

$40.99

Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:

Guaranteed OE quality form, fit and function
Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.

from

$42.99

AT FLTR 5/16 D BARB

from

$17.99

TRANSMISSION FILTER

from

$5.49

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$5.49

AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.

Product Features:

Easy Install – Finger-grip wing for ease of installation
All plugs have 14mm hex – just one wrench works for all
Hi-Temp Gasket – Red hi-temp gasket for max sealing protection

from

$31.99

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$7.99

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$3.99

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$3.49

These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:

Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
Restores functionality – built to restore a proper seal
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$2.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$3.49

These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:

Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
Restores functionality – built to restore a proper seal
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

2006 GMC Canyon Filters and PCVs

More 2006 GMC Canyon Filters and PCVs Categories

Essential 2006 GMC Canyon Filters and PCVs

aFe POWER – PRO 5R Air Filter: 98.6% Filtration Efficiency, 5 Layer Cotton, Oiled Filter, Track/Street Driving (Part No.30-10263)

Purolator ONE – Advanced Filtration Engine Air Filter: Full Synthetic Highly Embossed Media, Up To 99% Dirt Removal (Part No.A48171)

Carquest Standard – Engine Air Filter: Meets Original Equipment Specifications (Part No.R87013)

Spectre – Spectre Replacement Air Filter (Part No.HPR9778)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-7027)

Carquest Premium – Oil Filter: Ideal for Synthetic Oil, Protection up to 10,000 Miles (Part No.85522)

Purolator ONE – Oil Filter: Ideal for High Mileage & Synthetic Oil, Protects to 15,000 miles (Part No.PL15839)

Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles (Part No.R84060)

ACDelco – Automatic Transmission Fluid Filter Kit with Gasket and Seal (Part No.24208576)

Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.85976)

ACDelco – High-Performance Automatic Transmission Fluid Filter Kit (Part No.TF289)

B & M – Filter Extension, 4L60E (Part No.70354)

Imperial – Remote Mount Filter Kit – Universal (Part No.240291)

Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.96080)

ATP – AUTO TRANS FLTR KT (Part No.IL-150)

Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.85970)

ATP – AT FLTR 5/16 D BARB (Part No.JX-151)

Carquest Premium – TRANSMISSION FILTER (Part No.96313029)

Dorman – Pilot Point Engine Oil Drain Plug: M12-1.75 Thread, 15 mm Head (Sold by each) (Part No.090-175)

Accufit – Oil Drain Plug, M12 x 1.75 (Part No.ODP-00009B)

Dorman – Standard Engine Oil Drain Plug: M12-1.75 Thread, 15 mm Head, 1 Pack (Part No.090-948)

Dorman – Magnetic Engine Oil Drain Plug: M12x1.75 Thread, 15 mm Head, 1 Pack (Part No.090-936CD)

Dorman – Help – Pilot Point Engine Oil Drain Plug: M12-1.75 Thread, 15 mm Head, 1 Pack (Part No.69011)

Dorman – Oil Drain Plug Gasket – Rubber Fits M12, 7/16 Inch (sold by each) (Part No.097-119)

Felpro – Engine Oil Drain Plug Gasket (Part No.70820)

Dorman – Rubber Drain Plug Gasket, Fits M12 (20mm Od) (Part No.097-836CD)

Popular 2006 GMC Canyon Filters and PCVs Categories

2006 GMC Canyon Filters and PCVs

Top-Rated Filters and PCVs Brands For Your 2006 GMC Canyon

Popular K&N Filters and PCVs

Top-Rated Purolator ONE Filters and PCVs

FAQs for 2006 GMC Canyon Filters and PCVs

What are the most purchased Filters and PCVs for the 2006 GMC Canyon?

What are the top-rated 2006 GMC Canyon Filters and PCVs?