2006 Ford Mustang Steering and Chassis Parts

Below you will find various in-demand Ford Steering and Chassis Parts, components and accessories for your 2006 Mustang. Advance Auto Parts has popular Mustang parts like Tie Rods, Power Steering Parts, Sway Bars and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Mustang model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2006 Ford Mustang Steering and Chassis Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2006 Ford Mustang Steering and Chassis Parts Categories

Sway Bars and Kits

Power Steering Coolers

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Front Alignment Kits

Drive Shaft CV Joints

Power Steering Pump Pulleys

Power Steering Pressure Hoses

Camber Kits

Power Steering Pressure Switches

Power Steering Hose Washer

Power Steering Pump Kits

Steering Knuckles

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Sway Bar Bushing Brackets

Pinion Bearings

Sway Bar Bushings

Track Bar Bushings

Power Steering Pump Seal Kits

Ball Joint Bolt Kits

Essential Steering and Chassis Parts for 2006 Ford Mustangs

from

$239.99

This drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to collision damage, water infiltration or road debris contamination
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$18.49

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$34.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$33.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$36.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$428.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$106.99

Whiteline Roll Center kits are designed to correct roll-centre geometry using specially engineered ball-joints. The KCA439 kit has 3 adjustment settings to provide precision geometry tuning to the varying heights of lowered Mustangs. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tire contact ultimately improving front end grip and cornering speeds.

Product Features:

Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$46.99

Universal sway bar mount saddle. Check out the universal sway bar D mount range offering 14-30mm diameter bushings.

Product Features:

Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.

from

$38.49

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$35.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$37.99

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$62.99

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$29.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$270.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 27mm 4 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.

Product Features:

Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
Take control with multi-point adjustment that allow the driver to fine tune vehicle characteristics to suit their driving preference or conditions.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Manufactured from high quality alloy and utilise the latest technology synthetic elastomer link bushings ensuring maximum strength and durability.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$51.99

Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.

Product Features:

Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$894.99

Edelmann Elite power steering rack and pinions represent a step up in quality and performance over typical aftermarket brand power steering racks and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each rack is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every rack has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

Every component is 100% completely new, never reused
Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
Re-engineered designs like internal vent tubing fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
Complete with Inner Tie Rods & Boots
Includes necessary hardware where applicable (o-ring, washers, etc…)
Reinforced Packaging – Assures the product will arrive undamaged and ready for installation
U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

from

$464.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$34.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$169.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$20.49

Driveworks Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. Driveworks Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Chassis parts have been engineered and manufactured under the proven quality systems. Driveworks Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:

Designed to meet OE Form, Fit, and Function.
Performance tested to ensure durability and reduce tire wear.
Precision engineered for improved ride and steering response.
Hardware included for ease of installation (where applicable)

from

$16.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$309.99

Edelmann Elite power steering pumps represent a step up in quality and performance over typical aftermarket brand power steering pumps and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each pump is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every pump has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

Every component is 100% completely new, never reused
Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
Re-engineered designs fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
Includes necessary hardware where applicable (o-ring, washers, etc…)
Pre-installed pulley and reservoir for ease and time saving install
U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

from

$99.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$39.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$31.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Heavy-duty power steering oil cooler
Size: 3/4″ x 5″ x 9-1/4″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and helps prolong power steering system life

from

$20.99

Tie Rod End

from

$47.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$6.49

Restore a leaking power steering system with this power steering pump O-ring repair kit. Replacing original seals that have dry-rotted or deteriorated with age, these direct-replacement O-rings eliminate leaks.

Product Features:

Exact match – these replacement steering pump O-rings are a direct replacement for worn, dry-rotted original equipment components
Durable construction – manufactured from quality materials for a long service life
Saves money – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

Upgrade your 2006 Ford Mustang with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2006 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 89 Steering and Chassis Parts for the 2006 Ford Mustang, designed to meet your needs without breaking the bank. From Tie Rod replacements to Power Steering Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2006 Ford Mustang at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $6.49 to $894.99, with an average price of $120.10. Our 89 Steering and Chassis Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 2006 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Ford Mustang, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, National, Driveworks, and more. Moog Steering and Chassis Parts start at just $49.99 and boast an impressive 4.5 stars average rating from customers. National and Driveworks also bring quality to the table, with Steering and Chassis Parts available starting at $14.99, and at an average 4.3 stars rating. With 503 customer reviews and counting, our 2006 Ford Mustang Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 2006 Ford Mustang!

Best-Selling Tie Rods for 2006 Ford Mustangs

Enhance the driving experience in your Ford with 7 quality Tie Rod components, starting at $32.49.

show more show less

from

$49.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$34.99

TIE ROD END 1 EA DRIVE

from

$73.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL – Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
Assembled in the USA
TIME SAVINGS – Pre-applied thread locking compound makes installation easier and prevents self-loosening

from

$32.49

Tie Rod End

from

$46.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$109.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$72.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

Most Popular 2006 Ford Mustang Power Steering Parts

Customize your Ford with 32 Power Steering Parts products like Power Steering Pumps, Power Steering Pressure Hoses, and Power Steering Return Hoses, all priced under $894.99.

show more show less

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$50.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$105.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$6.49

Exact match – these replacement steering pump O-rings are a direct replacement for worn, dry-rotted original equipment components
Durable construction – manufactured from quality materials for a long service life
Saves money – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$72.99

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$101.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$38.49

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$269.99

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$85.99

from

$235.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$271.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$47.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$66.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$231.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$894.99

Every component is 100% completely new, never reused
Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
Re-engineered designs like internal vent tubing fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
Complete with Inner Tie Rods & Boots
Includes necessary hardware where applicable (o-ring, washers, etc…)
Reinforced Packaging – Assures the product will arrive undamaged and ready for installation
U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

from

$237.99

Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE

from

$237.99

Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE

Top Picks for 2006 Ford Mustang Sway Bars

Upgrade Ford Mustangs with top-quality Sway Bars parts, including 26 OEM and aftermarket selections for your 2006 model.

show more show less

from

$56.99

Product Features:

EASY TO INSTALL – Wrench flats ensure easy installation and removal
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$17.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS: Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE: Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING: Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$22.29

PREMIUM MATERIALS: Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE: Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING: Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$29.99

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$51.99

Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating on steel links to reduce rust and extend service life
Hex formed studs for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Hardware included for easier installation (where applicable)

from

$39.49

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$30.99

PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$45.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$38.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$43.49

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$29.99

MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:

Improves upon OE designs
Quiet dependable operation
NASCAR-proven performance
Provides like-new steering ease of installation and longer life
Incorporates proven design and engineering features

from

$21.49

Allows Sway Bar System to Work At 100% Efficiency
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$22.49

PREMIUM MATERIALS: Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE: Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING: Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$502.99

Engineered to ‘Activate More Grip’, BFK005 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 33mm 4 point adjustable front sway bar and 27mm 4 point adjustable rear sway bar, the kit is completed with high quality sway bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.

from

$282.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 33mm 4 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.

Product Features:

Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
Take control with multi-point adjustment that allow the driver to fine tune vehicle characteristics to suit their driving preference or conditions.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$270.99

Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
Take control with multi-point adjustment that allow the driver to fine tune vehicle characteristics to suit their driving preference or conditions.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Manufactured from high quality alloy and utilise the latest technology synthetic elastomer link bushings ensuring maximum strength and durability.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$224.99

The symptoms of a failed suspension stabilizer bar assembly, also known as a sway bar, can include suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding. The causes for failure can range from worn bushings and links to collision impact. The sway bar and components in this assembly are designed to match the performance of the original equipment parts on specified vehicle makes, models and years. The assembly has been engineered and manufactured to strict quality control standards for a complete sway bar repair and reliable service life.

Product Features:

Direct replacement – the components in this suspension sway bar assembly are designed to match the performance of the factory assembly on specified vehicles to help ensure predictable vehicle handling
Ideal solution – engineered to help ensure proper vehicle handling and eliminate suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding
Durable construction – designed and manufactured to strict specifications for reliable performance, and to replace a sway bar that has failed due to collision or worn bushings or links
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$211.99

Direct replacement – the components in this suspension sway bar assembly are designed to match the performance of the factory assembly on specified vehicles to help ensure predictable vehicle handling
Ideal solution – engineered to help ensure proper vehicle handling and eliminate suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding
Durable construction – designed and manufactured to strict specifications for reliable performance, and to replace a sway bar that has failed due to collision or worn bushings or links
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$123.99

Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$123.99

Manufactured from high quality alloy and utilise the latest technology synthetic elastomer link bushings ensuring maximum strength and durability.
Manufactured from high quality alloy and utilise the latest technology synthetic elastomer link bushings ensuring maximum strength and durability.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$93.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$67.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$27.99

To suit 27mm diameter sway bars – the DIY (Do It Yourself) alloy lateral locking system can be utilized on both factory and more importantly aftermarket sway bars. The locks are easily installed on car with no need to remove the sway bar to install . They are mounted directly next to the sway bar mounting points and prevent shifting or sideways movement of the sway bar under lateral (cornering) loads. This results in improved sway bar effectiveness whilst preventing fouling of the sway bar on near by chassis and steering components.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$22.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

In-Demand Steering Shafts for 2006 Ford Mustangs

Select from 2 premium Steering Shafts parts for your 2006 Ford Mustang, with prices ranging from $298.99 to $428.99.

show more show less

from

$298.99

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$428.99

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

Most Sold 2006 Ford Mustang Ball Joints

Explore our best-selling Ford parts for the 2006 Mustang among 10 OEM and aftermarket options starting from $21.29.

show more show less

from

$254.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS – Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
GREASEABLE SOCKETá- Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$79.99

Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER GUSHER BEARING: Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET: Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT: Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING: Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL: Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE: Available for foreign and domestic nameplates

from

$254.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS – Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá-áLaser-etched ID provides visible assurance of genuine MOOG quality
GREASEABLE SOCKETá- Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$215.99

Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$215.99

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$279.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$215.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$106.99

Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$72.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$21.29

Designed to meet OE Form, Fit, and Function.
Performance tested to ensure durability and reduce tire wear.
Precision engineered for improved ride and steering response.
Hardware included for ease of installation (where applicable)

Top-Rated Steering and Chassis Parts Brands For Your 2006 Ford Mustang

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2006 Ford Mustangs. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, National, and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 2006 Mustang start at just $14.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2006 Ford Mustang Steering and Chassis Parts

When it comes to maintaining or upgrading your 2006 Ford Mustang, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2006 Ford Mustang. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $49.99, with an average price of just $60.32. Plus, with over 37 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $73.99

(3)

Front Inner Steering Tie Rod End

“replacement part perfect fit 05 mustang”

from $56.99

(11)

Suspension Stabilizer Bar Link

“Perfect fit and fairly easy to install.”

from $49.99

(23)

Steering Tie Rod End

“Fit as expected!”

Popular National 2006 Ford Mustang Steering and Chassis Parts

National auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2006 Ford Mustang owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2006 Mustang, Advance Auto Parts carries a full inventory of 1 National Steering and Chassis Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these National Steering and Chassis Parts range up to $14.99, plus, with more than 3 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $14.99

(3)

Bearing Race

“Used on my diesel truck”

FAQs for 2006 Ford Mustang Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2006 Ford Mustangs?

Out of 89 Steering and Chassis Parts that fit 2006 Ford Mustangs, the following parts are the top sellers:

New Power Steering Filter (10417593) – $32.99
Power Steering Caps – Power Steering Sealing Washer Assortment (17190459) – $6.49
Camber Bolt Kit (10361721) – $20.49

What’s the price range for 2006 Ford Mustang Steering and Chassis Parts?

Steering and Chassis Part prices for the 2006 Ford Mustang start at $6.49 and go up to $894.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2006 Ford Mustang?

The average price for Steering and Chassis Parts for the 2006 Ford Mustang is $120.10. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Ford Mustang model years?

Yes, we currently carry Steering and Chassis Parts for 56 model years of Ford Mustangs between 1964 and 2026. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 2006 Ford Mustang?

The cheapest 2006 Ford Mustang Steering and Chassis Parts we carry in stock are:

Power Steering Caps – Power Steering Sealing Washer Assortment (17190459) – $6.49
Power Steering Filter (50308546) – $13.99
Bearing Race (5052505) – $14.99
Suspension Stabilizer Bar Bushing Kit – Front to Frame (11619996) – $17.99
Camber Bolt Kit (10361721) – $20.49

What are the top-rated Steering and Chassis Parts that fit the 2006 Ford Mustang?

Out of 503 reviews by customers, our 2006 Ford Mustang Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2006 Ford Mustang and their top-rated products:

Tie Rods
- TIE ROD END 1 EA DRIVE (10361696) – $34.99
- Front Inner Steering Tie Rod End (21880381) – $73.99
- Steering Tie Rod End (21880495) – $49.99

What types of Steering and Chassis Parts do you sell for my 2006 Ford Mustang?

As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 2006 Ford Mustang:

Can I get help with 2006 Ford Mustang Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Steering and Chassis Parts and more.

What is your return policy for Ford Mustang Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Ford Mustang Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Ford Mustang Steering and Chassis Parts

Dorman – Propeller Shaft CV Joint Kit (Part No.932-203)

Driveworks – Sway Bar Link Kit (Part No.DW-K80631)

Rare Parts – Stabilizer Bar Link Kit (Part No.RP22199)

MOOG – Alignment Camber Kit (Part No.K90476)

Energy Suspension – Track Bar Bushing Set (Part No.4.7129G)

Dorman – Lower Steering Shaft (Part No.425-376)

Whiteline – Front Roll Center – Correction Kit (Part No.KCA439)

Whiteline – Alloy Sway Bar Saddle Mount (Part No.KBR10)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1019)

Cardone – Power Steering Filter (Part No.20-P038F)

Driveworks – Tie Rod End (Part No.DW-ES2150RL)

Carquest Premium – Power Steering Repair Fittings, 3/8" Swivel "O" Ring x 3/8" Beaded Tube (Part No.34987)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8635)

Whiteline – Non-Adjustable Sway Bar – Rear, 27mm (Part No.BFR65Z)

Whiteline – Front Lower Ball Joint (Part No.W53557)

Edelmann – Factory New Rack and Pinion – Includes Inner Tie Rods (Part No.2071)

Dorman – Steering Knuckle (Part No.698-225)

Dorman – Power Steering Pump Pulley (Part No.300-010)

Dorman – Suspension Control Arm (Part No.526-265)

Driveworks – Camber Bolt Kit (Part No.DW-K90474)

National – Bearing Race (Part No.LM29710)

Edelmann – Factory New Power Steering Pump with Reservoir (Part No.6012R)

Carquest Premium – Power Steering Pressure Hose Assembly, 5/16" Swivel "O" Ring (Type II) x 3/8" Swivel "O" Ring (Type I) (Part No.35483)

Rare Parts – Sway Bar Frame Bushing (Part No.RP18288)

Imperial – Power Steering Oil Cooler Heavy Duty (Part No.241011)

Carquest Premium – Tie Rod End (Part No.310-566343)

Powercraft – Pump Seal Kit (Part No.8634)

Dorman – Help – Power Steering Caps – Power Steering Sealing Washer Assortment (Part No.82540)

MOOG – Steering Tie Rod End (Part No.ES80805)

Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES80805)

MOOG – Front Inner Steering Tie Rod End (Part No.EV80804)

Driveworks – Tie Rod End (Part No.DW-EV80804)

Carquest Premium – Tie Rod End (Part No.310-34980)

Rare Parts – Tie Rod End (Part No.RP28620)

Rare Parts – Tie Rod End (Part No.RP28600)

National – Bearing Race (Part No.M802011)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Remanufactured Power Steering Pump (Part No.20-327)

Cardone – Power Steering Filter (Part No.20-0012F)

Cardone – New Power Steering Filter (Part No.20-0038F)

Dorman – Help – Power Steering Caps – Power Steering Sealing Washer Assortment (Part No.82540)

Imperial – Power Steering Oil Cooler (Part No.241009)

Carquest Premium – Power Steering Pressure Hose Assembly, 11mm Male Captive "O" Ring x 16mm Swivel "O" Ring (Part No.37475)

Cardone – Power Steering Filter (Part No.20-P038F)

Cardone – Remanufactured Power Steering Pump (Part No.20-368)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1019)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-288)

Carquest Premium – Power Steering Pressure Hose Assembly, 11mm Male Captive "O" Ring x 16mm Swivel "O" Ring – with Switch Port (Part No.37309)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-2001)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-299)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Powercraft – Pump Seal Kit (Part No.8634)

Dorman – Power Steering Pump Pulley (Part No.300-147)

Dorman – Power Steering Pump Pulley (Part No.300-009)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8635)

Carquest Premium – Power Steering Return Hose, 3/8" I.D. Hose x 3/8" I.D. Hose (Part No.37953)

Edelmann – Factory New Rack and Pinion – Includes Inner Tie Rods (Part No.2071)

Carquest Premium – Remanufactured Power Steering Rack & Pinion – Hydraulic (Part No.22-299CQ)

Carquest Premium – Remanufactured Power Steering Rack & Pinion – Hydraulic (Part No.22-288CQ)

MOOG – Suspension Stabilizer Bar Link (Part No.K80899)

MOOG – Suspension Stabilizer Bar Bushing Kit – Front to Frame (Part No.K201490)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201500)

Driveworks – Sway Bar Link Kit (Part No.DW-K80899)

Carquest Premium – Stabilizer Bar Link (Part No.510-232406)

MOOG – Suspension Stabilizer Bar Link (Part No.K750137)

MOOG – Stabilizer Bar Bushing Kit (Part No.K8787)

Dorman – Sway Bar Bushing Bracket Kit (Part No.928-349)

MOOG – Suspension Stabilizer Bar Link (Part No.K750139)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5191R)

MOOG – Stabilizer Bar Link (Part No.K700050)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5193R)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201532)

Whiteline – Sway Bar Kit – Front 33mm & Rear 27mm (Part No.BFK005)

Whiteline – Non-Adjustable Sway Bar – Front, 33mm (Part No.BFF55Z)

Whiteline – Non-Adjustable Sway Bar – Rear, 27mm (Part No.BFR65Z)

Dorman – Sway Bar Kit (Part No.927-203)

Dorman – Sway Bar Kit (Part No.927-202)

Whiteline – Front Adjustable Sway Bar Link (Part No.KLC169)

Whiteline – Rear Adjustable Sway Bar Link (Part No.KLC170)