2006 Ford Mustang Steering and Chassis Parts

Name: Tie Rod End
Brand: Carquest Premium
SKU: 410-637385
Price: 86.99 USD

Below you will find various in-demand Ford Steering and Chassis Parts, components and accessories for your 2006 Mustang. Advance Auto Parts has popular Mustang parts like Tie Rods, Power Steering Parts, Sway Bars and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Mustang model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2006 Ford Mustang Steering and Chassis Parts below and start saving instantly.

Popular 2006 Ford Mustang Steering and Chassis Parts Categories

Sway Bars and Kits

Steering Shaft Bearings

Power Steering Coolers

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Front Alignment Kits

Drive Shaft CV Joints

Power Steering Pump Pulleys

Power Steering Pressure Hoses

Camber Kits

Power Steering Pressure Switches

Power Steering Hose Washer

Power Steering Pump Kits

Steering Knuckles

Sway Bar Link Bushing Kits

Power Steering Return Hoses

Pinion Bearings

Sway Bar Bushings

Track Bar Bushings

Power Steering Pump Seal Kits

Suspension Stabilizer Bar Brackets

Power Steering Pump Hose Fittings

Ball Joint Bolt Kits

Essential Steering and Chassis Parts for 2006 Ford Mustangs

from

$86.99

Carquest Premium tie rods are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium tie rods utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all tie rods to reduce rust. Each part number in the Carquest Premium tie rod line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Corrosion-resistant coating to reduce rust and extend service life
Hex formed studs and/or wrench flats for easier installation (where applicable)
Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Inner tie rod ends are supplied with thread locking compound
Hardware included for easier installation (where applicable)

from

$49.99

CAM BOLT KIT

from

$27.99

To suit 27mm diameter sway bars – the DIY (Do It Yourself) alloy lateral locking system can be utilized on both factory and more importantly aftermarket sway bars. The locks are easily installed on car with no need to remove the sway bar to install. They are mounted directly next to the sway bar mounting points and prevent shifting or sideways movement of the sway bar under lateral (cornering) loads. This results in improved sway bar effectiveness whilst preventing fouling of the sway bar on near by chassis and steering components.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$36.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$10.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$213.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$238.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 30mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Tubular (hollow) construction provides significant weight reduction over a solid sway bar without sacrificing bar rate. Ideal for motorsport where every minor advantage counts.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.

from

$145.99

The Panhard bar’s function is to control the lateral movement of the axle. When modifying the ride height of your vehicle it is necessary to use an adjustable panhard rod to correct axle centre. Whiteline’s Adjustable Panhard Rod is made from heavy duty DOM steel tube with Forged Ends for strength, and features our GIIRO bushings with grease free technology for quiet, maintenance-free operation.

Product Features:

Engineered to alter/ optimise lateral location of the axle as a result of lifting or lowering a vehicle.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$464.99

This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
Reliable fit – precision-engineered to match the dimensions of original components
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$269.99

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$167.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$16.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$6.49

This power steering pump washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this power steering pump washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$85.99

This power steering pressure switch is designed to match the fit, function and performance of an original equipment switch that is damaged, failed, or malfunctioning from internal component failure on specified vehicles. It is engineered to help ensure that engine power output meets the varying needs for power steering pump pressure during vehicle parking and other low-speed maneuvers.

Product Features:

Direct replacement – this power steering pressure switch is designed to match the fit and function of a switch that is damaged or malfunctioning from internal component failure on specified vehicles
Ideal solution – engineered to help ensure that engine power output meets the varying needs for power steering pump pressure during vehicle parking and other low-speed maneuvers
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$77.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$25.49

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$106.99

Whiteline Roll Cente kits are designed to correct roll-centre geometry using specially engineered ball-joints. The {insert part #} kit has 3 adjustment settings to provide precision geometry tuning to the varying heights of lowered Mustangs. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.

Product Features:

Engineered to alter/ optimise toe alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$36.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$33.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$23.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$32.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$54.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

Zinc coated tubes protect against rust and corrosion

from

$27.99

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing from specific materials provides strength and durability to prevent breakage
Coated technology provides a smooth and durable surface to prevent corrosion and rust
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
A slotted nut and cotter pin for a more secure installation

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$78.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$19.49

This steering shaft bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this steering shaft bearing is designed to match the fit and function of the original bearing on specified vehicles
Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$69.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

Upgrade your 2006 Ford Mustang with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2006 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 88 Steering and Chassis Parts for the 2006 Ford Mustang, designed to meet your needs without breaking the bank. From Tie Rod replacements to Power Steering Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2006 Ford Mustang at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $6.49 to $894.99, with an average price of $110.86. Our 88 Steering and Chassis Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 2006 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Ford Mustang, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Moog, DriveWorks, Imperial, and more. Moog Steering and Chassis Parts start at just $49.99 and boast an impressive 4.5 stars average rating from customers. DriveWorks and Imperial also bring quality to the table, with Steering and Chassis Parts available starting at $9.99, and at an average 4.3 stars rating. With 879 customer reviews and counting, our 2006 Ford Mustang Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 2006 Ford Mustang!

Best-Selling Tie Rods for 2006 Ford Mustangs

Enhance the driving experience in your Ford with 7 quality Tie Rod components, starting at $32.49.

show more show less

from

$49.99

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$34.99

TIE ROD END 1 EA DRIVE

from

$73.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Assembled in the USA
TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening

from

$32.49

Tie Rod End

from

$46.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$109.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$72.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

Most Popular 2006 Ford Mustang Power Steering Parts

Customize your Ford with 31 Power Steering Parts products like Power Steering Pumps, Power Steering Pressure Hoses, and Power Steering Return Hoses, all priced under $894.99.

show more show less

from

$50.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$105.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$47.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$32.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$6.49

Direct replacement – this power steering pump washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Power steering oil cooler
Size: 3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$72.99

from

$35.49

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$101.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100 percent new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100 percent tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$38.49

The main device in any electrical circuit is a switch. In an electrical circuit a device is required to turn a component on or off when commanded by the operator, within the switch are contacts that will complete the electrical path to the load, or driven device. The operation of a switch may be manual from a person or could be electrical from some sort of controller or computer.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$269.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$85.99

from

$235.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$271.99

Protective coating applied to each unit to extend the life of the unit (where applicable).
100 percent performance testing to ensure perfect fit, function and reliable performance.
100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

from

$34.99

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$47.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$66.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$26.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$29.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$231.99

Switch sockets allow re-installation of OE pressure sensors
Zinc coated tubes protect against rust and corrosion
Banjo end lock tabs prevent hose end from loosening
Double lock beading with barbed tube end provides superior hose/coupling integrity
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise
Movable mount bracket for easy, secure installation
Silver heat guard protects hose in high heat areas
Original style fittings, no adapters required

from

$894.99

Edelmann Elite power steering rack and pinions represent a step up in quality and performance over typical aftermarket brand power steering racks and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each rack is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every rack has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

Every component is 100% completely new, never reused
Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
Re-engineered designs like internal vent tubing fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
Complete with Inner Tie Rods & Boots
Includes necessary hardware where applicable (o-ring, washers, etc…)
Reinforced Packaging – Assures the product will arrive undamaged and ready for installation
U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

from

$91.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Power Steering Pressure Switch monitors the hydraulic pressure in the power steering system, enhancing safety and performance by alerting the driver to potential issues such as low fluid levels or system malfunctions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Top Picks for 2006 Ford Mustang Sway Bars

Upgrade Ford Mustangs with top-quality Sway Bars parts, including 26 OEM and aftermarket selections for your 2006 model.

show more show less

from

$56.99

Product Features:

EASY TO INSTALL – Wrench flats ensure easy installation and removal
GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$17.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$22.29

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$29.99

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$51.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$39.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features

from

$30.99

PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$45.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$38.99

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$19.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$40.99

Allows Sway Bar System to Work At 100% Efficiency
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$22.49

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$502.99

Engineered to ‘Activate More Grip’, BFK005 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 33mm 4 point adjustable front sway bar and 27mm 4 point adjustable rear sway bar, the kit is completed with front and rear sway bar links and mounting accessories (where applicable) that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.

from

$282.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 27mm 4 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.

from

$270.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 27mm 4 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.

from

$224.99

The symptoms of a failed suspension stabilizer bar assembly, also known as a sway bar, can include suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding. The causes for failure can range from worn bushings and links to collision impact. The sway bar and components in this assembly are designed to match the performance of the original equipment parts on specified vehicle makes, models and years. The assembly has been engineered and manufactured to strict quality control standards for a complete sway bar repair and reliable service life.

Product Features:

Direct replacement – the components in this suspension sway bar assembly are designed to match the performance of the factory assembly on specified vehicles to help ensure predictable vehicle handling
Ideal solution – engineered to help ensure proper vehicle handling and eliminate suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding
Durable construction – designed and manufactured to strict specifications for reliable performance, and to replace a sway bar that has failed due to collision or worn bushings or links
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$211.99

Direct replacement – the components in this suspension sway bar assembly are designed to match the performance of the factory assembly on specified vehicles to help ensure predictable vehicle handling
Ideal solution – engineered to help ensure proper vehicle handling and eliminate suspension creaking, clunking and groaning noises, abnormal tire wear and steering binding
Durable construction – designed and manufactured to strict specifications for reliable performance, and to replace a sway bar that has failed due to collision or worn bushings or links
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$123.99

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$123.99

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

from

$93.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$67.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$27.99

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$24.99

STABILIZ BAR LINK KT

from

$22.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

In-Demand Steering Shafts for 2006 Ford Mustangs

Select from 3 premium Steering Shafts parts for your 2006 Ford Mustang, with prices ranging from $9.99 to $428.99.

show more show less

from

$9.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$298.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$428.99

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

Most Sold 2006 Ford Mustang Ball Joints

Explore our best-selling Ford parts for the 2006 Mustang among 10 OEM and aftermarket options starting from $21.29.

show more show less

from

$254.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality
GREASEABLE SOCKETá–?Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installation
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$79.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$254.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

CARBON FIBER BEARINGS — Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG quality
GREASEABLE SOCKETá–?Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminants
HARDWARE INCLUDED — Comes with all necessary hardware for easy, fast installation
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box

from

$215.99

Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$215.99

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$279.99

Restores vehicle handling
With ball joint
Reduces vibration
With bushing

from

$215.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$106.99

Engineered to alter/ optimise toe alignment to rectify tyre wear and/or reduce inherent understeer/oversteer behaviour.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$72.99

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$21.29

Driveworks Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. Driveworks Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Chassis parts have been engineered and manufactured under the proven quality systems. Driveworks Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:

Designed to meet OE Form, Fit, and Function.
Performance tested to ensure durability and reduce tire wear.
Precision engineered for improved ride and steering response.
Hardware included for ease of installation (where applicable)

Top-Rated Steering and Chassis Parts Brands For Your 2006 Ford Mustang

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2006 Ford Mustangs. Below you’ll find some of our best rated Steering and Chassis Parts from Moog, DriveWorks, and Imperial, and more. Steering and Chassis Parts from these brands that fit a 2006 Mustang start at just $9.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Moog 2006 Ford Mustang Steering and Chassis Parts

When it comes to maintaining or upgrading your 2006 Ford Mustang, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2006 Ford Mustang. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $49.99, with an average price of just $60.32. Plus, with over 37 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $49.99

(23)

Steering Tie Rod End

“Fit as expected!”

from $73.99

(3)

Front Inner Steering Tie Rod End

“replacement part perfect fit 05 mustang”

from $56.99

(11)

Suspension Stabilizer Bar Link

“Perfect fit and fairly easy to install.”

Popular DriveWorks 2006 Ford Mustang Steering and Chassis Parts

DriveWorks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2006 Ford Mustang owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 2006 Mustang, Advance Auto Parts carries a full inventory of 3 DriveWorks Steering and Chassis Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these DriveWorks Steering and Chassis Parts range from $9.99 to $34.99, plus, with more than 80 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from $32.49

(2)

Tie Rod End

“Nice”

from $9.99

(70)

Taper Bearing Set

“Part had the form, fit and function that I needed.”

from $34.99

(8)

TIE ROD END 1 EA DRIVE

“Standard replacement part. Good quality.”

FAQs for 2006 Ford Mustang Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2006 Ford Mustangs?

Out of 88 Steering and Chassis Parts that fit 2006 Ford Mustangs, the following parts are the top sellers:

Taper Bearing Set (5050529) – $9.99
New Power Steering Filter (10417593) – $32.99
Power Steering Caps – Power Steering Sealing Washer Assortment (17190459) – $6.49

What’s the price range for 2006 Ford Mustang Steering and Chassis Parts?

Steering and Chassis Part prices for the 2006 Ford Mustang start at $6.49 and go up to $894.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2006 Ford Mustang?

The average price for Steering and Chassis Parts for the 2006 Ford Mustang is $110.86. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Ford Mustang model years?

Yes, we currently carry Steering and Chassis Parts for 54 model years of Ford Mustangs between 1964 and 2024. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Steering and Chassis Parts for my 2006 Ford Mustang?

The cheapest 2006 Ford Mustang Steering and Chassis Parts we carry in stock are:

Power Steering Caps – Power Steering Sealing Washer Assortment (17190459) – $6.49
Power Steering Filter (50167394) – $7.99
Taper Bearing Set (5050529) – $9.99
Mounting Kit System (6014844) – $11.99
Cup (50206150) – $16.49

What are the top-rated Steering and Chassis Parts that fit the 2006 Ford Mustang?

Out of 879 reviews by customers, our 2006 Ford Mustang Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2006 Ford Mustang and their top-rated products:

Tie Rods
- Steering Tie Rod End (21880495) – $49.99
- Front Inner Steering Tie Rod End (21880381) – $73.99
- TIE ROD END 1 EA DRIVE (10361696) – $34.99

What types of Steering and Chassis Parts do you sell for my 2006 Ford Mustang?

As of 11/2/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2006 Ford Mustang:

Can I get help with 2006 Ford Mustang Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Steering and Chassis Parts and more.

What is your return policy for Ford Mustang Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Ford Mustang Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Ford Mustang Steering and Chassis Parts

Carquest Premium – Tie Rod End (Part No.410-637385)

Rare Parts – CAM BOLT KIT (Part No.RP16746)

Whiteline – Sway Bar Lateral Lock (Part No.KLL127)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.540-707)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)

Cardone – Remanufactured Power Steering Pump (Part No.20-9651)

Whiteline – Sway Bar 30Mm Heavy Duty Blade Adjustable (Part No.BFF95Z)

Whiteline – Panhard Rod (Part No.KPR068)

Dorman – Steering Knuckle (Part No.698-225)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-288)

Dorman – Suspension Control Arm (Part No.524-010)

FAG US – Cup (Part No.M802011)

Dorman – Help – Power Steering Caps – Power Steering Sealing Washer Assortment (Part No.82540)

Dorman – Power Steering Pressure Sensor (Part No.987-013)

Carquest Premium – Power Steering Pressure Hose Assembly, 1/4" Male Inv. Flare x 3/8" Female S.A.E., 1/4" Male Inv. Flare x 3/8" Female S.A.E. (Part No.35315)

Carquest Premium – Power Steering End Fitting, 3/8" Male Inv. Flare x 3/8" Beaded Tube (Part No.35012)

Whiteline – Roll Centre Correction Kit (Part No.KCA439)

Dorman – Power Steering Pump Pulley (Part No.300-028)

Energy Suspension – Track Bar Bushing Set (Part No.4.7129G)

Rare Parts – Sway Bar Link Kit (Part No.RP17014)

Cardone – New Power Steering Filter (Part No.20-0038F)

Carquest Premium – Power Steering End Fittings – 90 Deg Elbow (Part No.34970)

Driveworks – Tie Rod End (Part No.DW-EV117)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Rare Parts – Tie Rod End (Part No.RP26200)

Dorman – Upper Steering Column Bearing (Part No.926-537)

Powercraft – Pump Seal Kit (Part No.8501)

Rare Parts – Sway Bar Link Kit (Part No.RP22247)

MOOG – Steering Tie Rod End (Part No.ES80805)

Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES80805)

MOOG – Front Inner Steering Tie Rod End (Part No.EV80804)

Driveworks – Tie Rod End (Part No.DW-EV80804)

Carquest Premium – Tie Rod End (Part No.310-34980)

Rare Parts – Tie Rod End (Part No.RP28620)

Rare Parts – Tie Rod End (Part No.RP28600)

Cardone – Power Steering Filter (Part No.20-0058F)

Cardone – Remanufactured Power Steering Pump (Part No.20-327)

Cardone – Power Steering Filter (Part No.20-0012F)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Cardone – New Power Steering Filter (Part No.20-0038F)

Dorman – Help – Power Steering Caps – Power Steering Sealing Washer Assortment (Part No.82540)

Imperial – Power Steering Oil Cooler (Part No.241009)

Carquest Premium – Power Steering Pressure Hose Assembly, 11mm Male Captive "O" Ring x 16mm Swivel "O" Ring (Part No.37475)

Cardone – Power Steering Filter (Part No.20-P038F)

Cardone – Remanufactured Power Steering Pump (Part No.20-368)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1019)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-288)

Carquest Premium – Power Steering Pressure Hose Assembly, 11mm Male Captive "O" Ring x 16mm Swivel "O" Ring – with Switch Port (Part No.37309)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-2001)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-299)

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Powercraft – Pump Seal Kit (Part No.8634)

Dorman – Power Steering Pump Pulley (Part No.300-147)

Dorman – Power Steering Pump Pulley (Part No.300-009)

Powercraft – Pump Drive Shaft Seal Kit (Part No.8635)

Carquest Premium – Power Steering Return Hose, 3/8" I.D. Hose x 3/8" I.D. Hose (Part No.37953)

Edelmann – Factory New Rack and Pinion – Includes Inner Tie Rods (Part No.2071)

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1032)

MOOG – Suspension Stabilizer Bar Link (Part No.K80899)

MOOG – Front To Frame Suspension Stabilizer Bar Bushing Kit (Part No.K201490)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201500)

Driveworks – Sway Bar Link Kit (Part No.DW-K80899)

Carquest Premium – Stabilizer Bar Link (Part No.510-232406)

MOOG – Suspension Stabilizer Bar Link (Part No.K750137)

MOOG – Stabilizer Bar Bushing Kit (Part No.K8787)

Dorman – Sway Bar Bushing Bracket Kit (Part No.928-349)

MOOG – Suspension Stabilizer Bar Link (Part No.K750139)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5193R)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5191G)

MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201532)

Whiteline – Adjustable Sway Bar Kit for Enhanced Handling and Performance (Part No.BFK005)

Whiteline – Sway Bar 33Mm Heavy Duty Blade Adjustable (Part No.BFF55Z)

Whiteline – Sway Bar 27Mm Heavy Duty Blade Adjustable (Part No.BFR65Z)

Dorman – Sway Bar Kit (Part No.927-203)

Dorman – Sway Bar Kit (Part No.927-202)

Whiteline – Sway Bar Link (Part No.KLC170)

Whiteline – Sway Bar Link (Part No.KLC169)

Rare Parts – Sway Bar Link (Part No.RP19506)