2006 Ford F-450 Super Duty Fuel and Emissions Systems

Popular 2006 Ford F-450 Super Duty Fuel and Emissions Systems Categories

Essential Fuel and Emissions Systems for 2006 Ford F-450 Super Duties

Carquest Premium – Diesel Injection Control Pressure Sensor (Part No.HMA1004K)

Diesel Injection Control Pressure Sensor

from

$118.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:
  • The Carquest Premium line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
  • Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
  • Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
  • Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
  • All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.
See More

Dorman – Glow Plug And Injector Harness Repair Connector (Part No.904-188)

Glow Plug And Injector Harness Repair Connector

from

$33.49
This fuel injection harness connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel injection harness connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Fuel Tank Lock Ring (Part No.579-128)

Fuel Tank Lock Ring

from

$87.99
A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:
  • Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part.
  • Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank.
  • Durable construction – manufactured from quality materials for superior service and reliability
  • Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience
See More

Tech Smart – Fuel Pressure Regulator Service Kit (Part No.R81001)

Fuel Pressure Regulator Service Kit

from

$81.99
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • Complete kit comes with everything needed to rebuild the fuel filter housing after a weakened stock spring causes hard starting, stalling, poor fuel mileage, and poor acceleration
  • Includes fuel pressure regulator, gasket, O-rings, and hardware for ease of installation
  • Once installed, the new fuel pressure regulator will Increase fuel pressure by 10-15 PSI, maximizing performance and injector life
  • All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Tube (Part No.EGE1655)

Exhaust Gas Recirculation (EGR) Tube

from

$117.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Gates – Emission Control & Ventilation Hose (Part No.EMH160)

Emission Control & Ventilation Hose

from

$61.99
Gates

Product Features:
  • Resistant to fuel vapors and oil
  • Direct replacement ensures exact fit and easy installation
  • Meets SAE J30R7 specifications
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
See More

Dorman – Six Wire Electrical Connector Pigtail (Part No.645-909)

Six Wire Electrical Connector Pigtail

from

$38.99
This fuel pump driver module connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel pump driver module connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25042)

Remanufactured Diesel Fuel Injector

from

$209.99
CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes 100% replacement of plunger and barrel to improve longevity over competitive units
  • Includes all new premium quality O-rings and seals
  • Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
See More

Carquest – Fuel Injection Pressure Regulator (Part No.23078)

Fuel Injection Pressure Regulator

from

$62.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Our fuel pressure regulators are application specific for the perfect fit and form
  • A robust engineering design for greater resistance to leakage
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Dorman – Exhaust Gas Recirculation Tube (Part No.598-144)

Exhaust Gas Recirculation Tube

from

$33.99
This exhaust gas recirculation (EGR) line is designed to match the fit of an original EGR line on specified vehicles. It is engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve.

Product Features:
  • Direct replacement – this exhaust gas recirculation line is designed to match the fit and function of the original equipment EGR line.
  • Ideal solution – engineered to help restore proper air-fuel balance when a line is malfunctioning due to deposits built up in the EGR valve.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Pump Driver Module (Part No.FPC1087)

Fuel Pump Driver Module

from

$57.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1026)

Manifold Absolute Pressure Sensor (MAP)

from

$69.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Motorcraft – Motorcraft MAP Sensor (Part No.C7044559823MTR)

Motorcraft MAP Sensor

from

$162.43
Motorcraft MAP sensors are the only MAP sensors recommended by Ford Motor Company for use in Ford and Lincoln vehicles.

Product Features:
  • New and remanufactured available to help meet your customers’ needs
  • Units come ready to plug and play, with no need for modifications
  • Optimizes fuel consumption and emissions to help ensure vehicles meet various state smog-level requirements
  • Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
  • Design includes OE innovations and upgrades
See More

Dorman – Remanufactured High Pressure Oil Pump (Part No.502-561)

Remanufactured High Pressure Oil Pump

from

$652.99
This diesel high-pressure oil pump (HPOP) is a direct replacement for the original equipment pump and has been remanufactured to stringent industry standards for optimum performance and efficiency.

Product Features:
  • Direct replacement – this diesel high-pressure oil pump (HPOP) matches the fit and functionality of the original equipment injection pump
  • Durable construction – this high-pressure oil pump is remanufactured from quality materials for durability
  • Cost-effective dealer alternative – offers original manufacturer quality at lower cost than a dealer replacement
  • Quality tested – this high-pressure oil pump has been tested for quality and fit for this vehicle application
See More

Dorman – Fuel Pump Control Module (Part No.E3006448011DOR)

Fuel Pump Control Module

from

$124.82
Re-engineered to address failure points in the original materials and design, Dorman’s Fuel Pump Driver Module is powder-coated for high corrosion resistance and long-lasting durability. Newly designed rubber bushings on the mounting screws help to sustain years of service.

Product Features:
  • Dorman’s fully re-engineered micro-processor provides greater response time and reliability
  • Comes with rubber mounting bushings to position the module away from the steel frame for increased protection from corrosion and damage to the metal housing
  • Regulates voltage to the fuel pump in order to maintain proper fuel pressure over the full operating range of the engine
  • Vehicle simulator testing has been conducted on this part to ensure quality performance
See More

Dorman – Water In Fuel Sensor (Part No.904-438)

Water In Fuel Sensor

from

$32.99
This replacement water-in-fuel (WiF) sensor matches the function and performance of the original equipment sensor to prevent water damaging a diesel fuel injector. Made of quality materials, it has undergone extensive testing to ensure durability.

Product Features:
  • Ideal replacement – this water-in-fuel (WiF) sensor matches the original equipment sensor’s function and performance.
  • Durable construction – this sensor is made of durable materials to withstand exposure to diesel fuel.
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone vehicle try-on and bench testing to ensure a quality fit and long service life
See More

DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015466288ND)

First Time Fit Air Fuel Ratio Sensor

from

$116.71
DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.

Product Features:
  • Tarnish-proof platinum electrodes provides longer life and maintains accuracy
  • Quick-response planar zirconia element can quickly detect oxygen concentration
  • Measures A/F ratios from approximately 12:1 to 19:1
  • Increased performance by mapping a/f ratios throughout rpm range
  • Reduces emissions by keeping the air-fuel mixture at an optimum ratio
See More

Carquest Premium – Reman Diesel Fuel Injector – 4 Pack (Part No.AD25022-4PK)

Reman Diesel Fuel Injector - 4 Pack

from

$685.99
Carquest premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is tested on a sophisticated flow bench under multiple operating parameters. This injector four-pack offers savings over purchasing single injectors. Replacing all four injectors at the same time ensures a complete repair and reduces the chance of future labor costs.

Product Features:
  • Includes four premium fuel injectors
  • Each unit is 100% tested to OE specifications
  • Includes 100% replacement of plunger and barrel to improve longevity over competitive units
  • Includes all new premium quality o-rings and seals
  • Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
See More

Motorcraft – Original Equipment (O.E.) Fuel Injector (Part No.CMR-8-RM)

Original Equipment (O.E.) Fuel Injector

from

$299.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
See More

Delphi – Electric Fuel Lift Pump: With Gasket (Part No.HFP964)

Electric Fuel Lift Pump: With Gasket

from

$312.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • All pumps are functionally tested for correct operation which improves pump reliability
  • Exact fit original equipment replacements means easy installation
  • Consistent pressure at all operating temperatures results in quick start-ups.
  • Pump is designed for diesel engines and applications
  • Always check fuel filter when replacing the fuel pump
See More

Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPC1011)

Fuel Injection Pressure Sensor

from

$89.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

Spectra Premium – Fuel Tank Strap (Part No.ST330)

Fuel Tank Strap

from

$94.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
  • Direct fit ensures safe, secure fuel tank installation
  • Product individually packaged and labeled to help reduce product damage prior to installation
  • Industry leading coverage on straps for plastic tanks
  • Manufactured with double-layered steel on the mounting brackets for a more robust solution
See More

Gates – Silicone Vacuum Hose (Part No.27079)

Silicone Vacuum Hose

from

$11.29
Specially formulated silicone rubber. High temperature resistance assures long service life in harsh environments.

Product Features:
  • Extremely ┐exible and kink resistant
  • Also used to transfer air, water and coolant for exhaust gas recirculation
  • Orange color for easy identification
  • Convenient 6-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard
  • Meets SAE J200 M2GE 705 Z1 (60-70 Shore A)
  • Temperature Range: -67 Deg. F to 350 Deg. F (-55 Deg. C to 177 Deg. C)
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AC20012)

Fuel Injector Seal Kit

from

$21.99
Complete injector seal kit includes all six components necessary to properly reseal injector when reinstalled. All parts in kit are manufactured using premium OE quality materials.

Product Features:
  • Includes pink and blue high-pressure oil seals, black square oil seal, steel back-up ring, orange fuel seal and copper combustion seal
  • Premium OE quality materials
  • Services one injector
See More

Carquest Premium – Fuel Injection Pressure Sensor (Part No.FPA1015)

Fuel Injection Pressure Sensor

from

$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Exhaust Gas Recirculation Cooler Kit – Not CARB Compliant (Part No.904-273)

Exhaust Gas Recirculation Cooler Kit - Not CARB Compliant

from

$419.99
This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:
  • Improved reliability – this replacement EGR cooler features a spiral tube design, reducing clogging experienced with the original manufacturer’s design.
  • Superior durability – precision-engineered using welded stainless steel for long service life.
  • Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
  • Hardware included – all necessary O-rings, gaskets, and application-specific hardware included
See More

Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPC1062)

Vapor Canister Vent Solenoid

from

$114.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Cardone – Remanufactured Vacuum Pump (Part No.64-1029)

Remanufactured Vacuum Pump

from

$138.99
CARDONE Remanufactured Vacuum Pumps are engineered for quick installation and no comebacks. Each unit is engineered and tested to meet or exceed O.E.M performance, providing youreliable performance, every time. Original design weaknesses are corrected to make a longer lasting part you and your vehicle can rely on.

Product Features:
  • 100% NEW check valves, diaphragms, O-rings and seals prevent leaks and ensure proper vacuum required to efficiently run vehicle accessories.
  • 100% computer testing guarantees reliable performance.
  • Engineered to meet or exceed O.E.M.performance.
  • Designed for easy installation.
  • Guaranteed fit and function.
See More

Upgrade your 2006 Ford F-450 Super Duty with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2006 Ford F-450 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your F-450 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 200 Fuel and Emissions Systems for the 2006 Ford F-450 Super Duty, designed to meet your needs without breaking the bank. From Fuel Injector replacements to Fuel Pumps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2006 Ford F-450 Super Duty at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $3.49 to $1,416.32, with an average price of $148.60. Our 200 Fuel and Emissions Systems in stock come from 23 trusted brands, so you’re sure to find the right part for your 2006 Ford F-450 Super Duty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Ford F-450 Super Duty, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like FELPRO, Motorcraft, Carquest Premium, and more. FELPRO Fuel and Emissions Systems start at just $3.49 and boast an impressive 5 stars average rating from customers. Motorcraft and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $6.99, and at an average 5 stars rating. With 2,913 customer reviews and counting, our 2006 Ford F-450 Super Duty Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Ford F-450 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your F-450 Super Duty in top shape, all in one place. Start shopping confidently below for your 2006 Ford F-450 Super Duty!

Best-Selling Fuel Injectors for 2006 Ford F-450 Super Duties

Enhance the driving experience in your Ford with 50 quality Fuel Injector components, starting at $3.49.

Dorman – Fuel Injection Control Module Repair Kit – No Flash Required (Part No.904-229)

Fuel Injection Control Module Repair Kit - No Flash Required

from

$209.99
This fuel injector control module is designed to match the fit and function of the original module on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration.
  • Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board.
  • No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
  • Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future
See More

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33711)

Fuel Injection Nozzle O-Ring Kit

from

$53.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Tech Smart – Fuel Injector Control Module (Part No.R76001)

Fuel Injector Control Module

from

$224.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • Allows you to replace only faulty power supply instead of entire fuel injection control module assembly
  • 100% new, not remanufactured, so there’s no leftover debris that may cause failure
  • Re-engineered circuit board layout
  • Higher-quality electronics protect critical components from excess heat that can lead to failure
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61478)

Fuel Injection Throttle Body Mounting Gasket

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Fuel Injector O-Ring Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Dorman – Fuel Pressure Regulator (Part No.904-239)

Fuel Pressure Regulator

from

$49.99
This fuel pressure regulator is engineered to match the function of the original equipment regulator on specified vehicles. It is engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning.

Product Features:
  • Direct replacement – this fuel pressure regulator is designed to match the fit and function of the original equipment regulator on specified vehicle.
  • Ideal solution – engineered to help ensure proper fuel injection pressure when the original regulator has failed or is malfunctioning.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Spectra Premium – Mass Air Flow Sensor (Part No.MA147)

Mass Air Flow Sensor

from

$89.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
  • Platinum connector threads reduce the number of connection points for faster reaction to change
  • Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
  • Ceramic board provides reliable voltage to eliminate engine rough-idle problems
  • Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
See More

Carquest – Fuel Injector (Part No.67528)

Fuel Injector

from

$295.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • State-of-the-art designs that meet or exceed OE specifications
  • Top-of-the-line quality and performance
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Cardone – Fuel Injector (Part No.2J-201)

Fuel Injector

from

$387.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
  • Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
  • All components are renewed or replaced as necessary to ensure high quality and durability
  • When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Tech Smart – Fuel Pressure Regulator Service Kit (Part No.R81001)

Fuel Pressure Regulator Service Kit

from

$81.99
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • Complete kit comes with everything needed to rebuild the fuel filter housing after a weakened stock spring causes hard starting, stalling, poor fuel mileage, and poor acceleration
  • Includes fuel pressure regulator, gasket, O-rings, and hardware for ease of installation
  • Once installed, the new fuel pressure regulator will Increase fuel pressure by 10-15 PSI, maximizing performance and injector life
  • All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6206)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$75.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Carquest Premium – Injection Pressure Regulator (IPR) Valve (Part No.AC20292)

Injection Pressure Regulator (IPR) Valve

from

$231.99
Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:
  • Original equipment fit, form and function
  • Manufactured to precise OE performance specifications
  • O-ring seals included and installed on new IPR valve
See More

Carquest Premium – Remanufactured Fuel Injection Control Module (FICM) (Part No.AE11242)

Remanufactured Fuel Injection Control Module (FICM)

from

$531.99
CARQUEST premium Fuel Injection Control Module (FICM) for the Ford Power Stroke 6.0L is completely disassembled and all electronic components are tested. Common failure points in the original design are corrected. All defective components are replaced with upgraded components. The unit is pre-programmed with the latest software available which improves injector operation (NO REFLASH REQUIRED). Each unit is 100% tested under multiple operating conditions prior to shipment. Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Preprogrammed plug-and-play ready which reduces installation time and cost
  • Upgraded module prevents common failure modes inherent with OE design
  • Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AC20152)

Fuel Injector Seal Kit

from

$14.29
Complete injector seal kit includes all seven components necessary to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.

Product Features:
  • Kit includes top high-pressure oil inlet seal and metal C clip, two injector body O-rings, copper combustion seal and two electrical plug seals
  • Premium OE quality materials
  • Services one injector
See More

Motorcraft – Original Equipment (O.E.) Fuel Injector (Part No.CN-5019-RM)

Original Equipment (O.E.) Fuel Injector

from

$322.99
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:
  • Motorcraft Fuel Injector Assembly consists of a cylindrical housing with an electric solenoid-controlled plunger valve mounted inside
  • When the solenoid is electrically actuated by the engine control module, the plunger valve opens, allowing fuel to reach the spray head that injects atomized fuel into the cylinder to be mixed with oxygen for combustion.
  • The resulting explosive air/fuel mixture is compressed by the upward moving piston and ignited by a spark plug or glow plug to power the engine.
  • As with all Motorcraft aftermarket parts, any engineering innovations or product improvements developed since the vehicle’s manufacture are incorporated into every Motorcraft Fuel Injector Assembly, ensuring the most current technology.
  • Motorcraft Fuel Injector Assemblies are built to last: corrosion resistant, pressure-tested and engineered to perform under extreme conditions and meet Ford’s exacting OE specifications, performance and quality standards.
See More

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33442)

Fuel Injection Nozzle O-Ring Kit

from

$46.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6251)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$119.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25072)

Remanufactured Diesel Fuel Injector

from

$257.99
CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes 100% replacement of the solenoids which eliminates wire insulation cracking and coil failure in the field
  • Includes 100% replacement of connector which ensures proper connection to vehicle wiring harness and proper fit and sealing through valve cover
  • Spool valves and housing are 100% leak and flow tested to meet or exceed OE specifications
  • New spool valves are designed with updated features to reduce injector stiction
  • Precision ground nozzles are 100% flow tested to ensure accurate and precise fuel delivery
  • Includes all new premium quality O-rings and seals
  • Includes copper combustion gasket
  • Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
See More

Dorman – Fuel Pressure Regulator Upgrade Kit (Part No.904-490)

Fuel Pressure Regulator Upgrade Kit

from

$38.99
This fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Fuel Injector Seal Kit (Part No.274838)

Fuel Injector Seal Kit

from

$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High-quality materials withstand extreme conditions
  • Undergoes extensive testing to ensure reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Dorman – Fuel Injection Pressure Regulator Seal Kit (Part No.904-415)

Fuel Injection Pressure Regulator Seal Kit

from

$34.49
This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles.
  • Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Remanufactured 58 Volt High Performance Fuel Injection Control Module (FICM) (Part No.AE1158P2)

Remanufactured 58 Volt High Performance Fuel Injection Control Module (FICM)

from

$719.99
CARQUEST premium 58-volt High Performance Fuel Injection Control Module (FICM) for the Ford Power Stroke 6.0L is completely disassembled and all electronic components are tested. Common failure points in the original design are corrected. All defective components are replaced with upgraded components. The stock unit is upgraded from 48 volts to 58 volts, which can improve injector operation and reduce injector stiction under cold operating conditions. The unit is pre-programmed with the latest software available. Each unit is 100% tested under multiple operating conditions prior to shipment. Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation.

Product Features:
  • Each unit is 100% tested under multiple operating conditions
  • Preprogrammed plug-and-play ready which reduces installation time and cost
  • Upgraded module prevents common failure modes inherent with OE design
  • Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
See More

Dorman – Fuel Injector O-Ring Kit (Part No.904-230)

Fuel Injector O-Ring Kit

from

$11.49
The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:
  • Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles.
  • Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Delphi – Fuel Injector (Part No.EX636692)

Fuel Injector

from

$277.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • 100% O-ring replacement
  • All Delphi injectors are tested utilizing OE methodologies
  • Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
  • No internal seal rings equals minimized leakage
  • Recessed fuel exit minimizing possible plugging
  • Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
  • Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock
See More

Carquest Premium – Fuel Pressure Regulator Upgrade Kit (Part No.AC20382)

Fuel Pressure Regulator Upgrade Kit

from

$41.49
This complete repair solution allows repair and upgrade of the fuel pressure regulator. The updated spring increases factory fuel pressure which improves injector operation and longevity. Low fuel pressure on the 6.0L Power Stroke can result in loss of power under full load and premature injector failure.

Product Features:
  • Includes updated spring
  • Includes housing seal and fitting O-ring
  • Includes technical bulletin and installation instructions
See More

Motorcraft – REGULATOR – DIESEL FUEL PRESSURE ORIGINAL EQUIPMENT (Part No.CM-5126)

REGULATOR - DIESEL FUEL PRESSURE ORIGINAL EQUIPMENT

from

$324.99
REGULATOR – DIESEL FUEL PRESSURE ORIGINAL EQUIPMENT

Carquest Premium – Fuel Injector Harness (Part No.AC20542)

Fuel Injector Harness

from

$372.99
This complete repair solution allows replacement of the fuel injector harness on the Ford 6.0L Power Stroke engine. The harness connects between the Fuel Injection Control Module (FICM) and fuel injectors. Chafing and damage to the OE harness is common due to improper OE routing and contact with sharp engine components. This can result in an engine misfire or no-start condition or damage to other components in the system. This new harness allows proper routing to eliminate this condition.

Product Features:
  • Includes all new wiring and connectors
  • Upgraded harness wrap reduces potential for chafing
  • Includes technical bulletin and installation tips
See More

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-50039)

Remanufactured Mass Air Flow Sensor

from

$145.99
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:
  • 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
  • On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
  • All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
  • Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
  • Components are rated to handle demanding temperature variations for optimum reliability in every environment.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Carquest Premium – Reman Diesel Fuel Injector – 4 Pack (Part No.AD25072-4PK)

Reman Diesel Fuel Injector - 4 Pack

from

$771.99
Carquest premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is tested on a sophisticated flow bench under multiple operating parameters.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes 100% replacement of the solenoids which eliminates wire insulation cracking and coil failure in the field
  • Includes 100% replacement of connector which ensures proper connection to vehicle wiring harness and proper fit and sealing through valve cover
  • Spool valves and housing are 100% leak and flow tested to meet or exceed OE specifications
  • New spool valves are designed with updated features to reduce injector stiction
  • Precision ground nozzles are 100% flow tested to ensure accurate and precise fuel delivery
  • Includes all new premium quality o-rings and seals
  • Includes copper combustion seal
  • Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
See More

Cardone – Injection Pressure Regulating Valve (Part No.2V-232)

Injection Pressure Regulating Valve

from

$495.99
CARDONE Remanufactured Fuel Injection Regulating Valves control the pressure in the high pressure oil system which operates your injectors. Vehicle conditions such as poor idle, stalling, and no-start are some of the correctible symptoms. Each individual unit is completely disassembled and undergoes quality testing to ensure proper operating parameters to meet or exceed OEM performance.

Product Features:
  • Built and 100% tested to perform like the original, with all standard wear items replaced
  • Air decay tested to ensure on-car performance
  • Designed for easy installation and setup
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1544)

Fuel Injection Pressure Regulator

from

$234.99
Fuel Injection Pressure Regulator

Dorman – Remanufactured Diesel Fuel Injector (Part No.502-505)

Remanufactured Diesel Fuel Injector

from

$197.99
This piezo diesel fuel injector has been thoroughly remanufactured using an exclusive process to ensure optimum quality and reliability. Critical components are replaced and clearances are verified after cleaning, reassembly and testing.

Product Features:
  • Ideal replacement – this remanufactured diesel fuel injector restores lost performance from a fouled original equipment injector
  • Thoroughly remanufactured – this fuel injector has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free
  • Cost-effective solution – offers original equipment quality at competitive price
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

Delphi – Mass Air Flow Sensor (Part No.AF10129)

Mass Air Flow Sensor

from

$185.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements

Product Features:
  • Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
  • Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
  • Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
  • All parts are calibrated and tested to match the OE part
  • Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
  • Delphi OE technology validated to match the vehicle applications
See More

Delphi – Mass Air Flow Sensor (Part No.AF10140)

Mass Air Flow Sensor

from

$159.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
  • Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
  • Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
  • All parts are calibrated and tested to match the OE part
  • Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
  • Delphi OE technology validated to match the vehicle applications
See More

Hitachi – Mass Air Sensor (Part No.B3150396162HIT)

Mass Air Sensor

from

$144.36
Hitachi manufactures a direct fit air mass sensor that guarantees OEM quality, fit and performance.

Product Features:
  • OEM Quality Direct fit Application
  • Platinum coated sensing element
  • Meets or exceeds OEM specifications
  • Utilizes the factory style mounts, connectors and fittings
  • Provides exceptional reliability
See More

Motorcraft – Motorcraft Fuel Injector (Part No.C1000423351MTR)

Motorcraft Fuel Injector

from

$85.07
Motorcraft electric fuel Injectors are built with the knowledge and experience that only comes from being the original equipment (OE) manufacturer.

Product Features:
  • Same fuel Injectors installed during vehicle production
  • Latest engineering enhancements are incorporated
  • Hot fuel handling capabilities translate into consistent performance
  • Before they are shipped, fuel Injectors are 100-percent flow-tested
  • Units come as complete assemblies for easier, faster installation
See More

Dorman – Fuel Pressure Regulator (Part No.C3000703165DOR)

Fuel Pressure Regulator

from

$75.65
Dorman’s Fuel Injection Pressure Regulator effectively adjusts the fuel pressure to the fuel injectors. The Fuel Injection Pressure Regulator is constructed of high-quality materials for a long service life.

Product Features:
  • Replacement restores engine performance
  • Save time, money and labor by replacing only the Fuel Injection Pressure Regulator – instead of the entire Fuel Injector
  • Direct replacement for proper fit every time
  • Replacement restores engine performance
  • Save time, money and labor by replacing only the Fuel Injection Pressure Regulator – instead of the entire Fuel Injector
  • Direct replacement for proper fit every time
  • On vehicle testing performed to ensure proper function
See More

Continental – Multi-port Fuel Injector (Part No.FI11371S)

Multi-port Fuel Injector

from

$50.99
VDO original equipment fuel injectors are identical fit, form, and function and provide the exact quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. VDO fuel injectors are designed for long service life and simplified installation. They are built in OE ISO TS certified facilities and manufactured to the highest quality standards. They offer dependable performance and robust design by being original equipment while still maintaining a competitive price.

Product Features:
  • The exact OEM part
  • Exact form fit and function
  • Simplified plug-and-play Installation
  • Durable long-lasting design
  • Made in the USA
  • Made in ISO certified facilites
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-1972)

Remanufactured Fuel Injector

from

$48.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes new O-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Felpro – FUEL INJECTOR O-RING SET (Part No.ES 73181)

FUEL INJECTOR O-RING SET

from

$29.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Motorcraft – Fuel Injector O-Ring Kit (Part No.CM-4717)

Fuel Injector O-Ring Kit

from

$28.99
All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.

Product Features:
  • Why Buy:
  • The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance
See More

Carquest Premium – Fuel Injector Sleeve (Part No.AC20252)

Fuel Injector Sleeve

from

$15.29
The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can result in combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:
  • Original equipment fit, form and function
See More

Motorcraft – Motorcraft Fuel Injector O-Ring Kit (Part No.C1013212064MTR)

Motorcraft Fuel Injector O-Ring Kit

from

$15.03
Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind

Product Features:
  • All parts meet original equipment requirements for fit, finish and durability
  • Specifically engineered for Ford and Lincoln vehicles
  • Durability tested to meet demanding original equipment service life specifications
  • Helps maintain original performance standards
See More

Mahle – Mahle, Fuel Injector O-Ring Kit, Pack of 12 (Part No.C1013387693MAH)

Mahle, Fuel Injector O-Ring Kit, Pack of 12

from

$14.95
Mahle, Fuel Injector O-Ring Kit, Pack of 12

Motorcraft – Fuel Injector O-Ring Kit (Part No.CM-5055)

Fuel Injector O-Ring Kit

from

$12.99
All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.

Product Features:
  • Why Buy:
  • The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance
See More

Dorman – Diesel Fuel Injector O-ring Kit (Part No.C1013212064DOR)

Diesel Fuel Injector O-ring Kit

from

$12.74
Engineered from rubber for superior resistance to fuel, oil and heat, Dorman’s Fuel Injector O-rings maintain an air-tight seal. This complete kit, containing multiple rings in various sizes, makes installation fast and convenient. O-rings are recommended for replacement any time you service the fuel injectors.

Product Features:
  • Naturally combats brittleness, cracking, and heat aging
  • O-rings also sold separately
  • Easy installation
  • Quality tested to ensure durability
See More

Motorcraft – Fuel Injector O-Ring Kit (Part No.C1013387693MTR)

Fuel Injector O-Ring Kit

from

$10.32
Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind

Product Features:
  • All parts meet original equipment requirements for fit, finish and durability
  • Specifically engineered for Ford and Lincoln vehicles
  • Durability tested to meet demanding original equipment service life specifications
  • Helps maintain original performance standards
See More

Felpro – FUEL INJECTOR O-RING SET (Part No.73116)

FUEL INJECTOR O-RING SET

from

$9.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Most Popular 2006 Ford F-450 Super Duty Fuel Pumps

Customize your Ford with 24 Fuel Pumps products like Fuel Pumps, Electric Pump Filter and Strainers, and Fuel Pump Driver Modules, all priced under $1,416.32.

Dorman – Fuel Sending Unit Pick Up Screen (Part No.904-419)

Fuel Sending Unit Pick Up Screen

from

$41.49
This fuel pump strainer is designed to match the fit and function of the original strainer on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel pump strainer is designed to match the fit and function of the original strainer on specified vehicles.
  • Restores functionality – reliable replacement for an original part that has failed due to fatigue.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Fuel Pump Driver Module with Mounting Bolts (Part No.590-001)

Fuel Pump Driver Module with Mounting Bolts

from

$115.99
This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.

Product Features:
  • Upgraded components – this fuel pump driver module replaces the original equipment part with an improved microprocessor for better response time.
  • Greater durability – powder-coated housing resists corrosion, and bushings position module away from steel frame for increased protection.
  • Trustworthy quality – designed and engineered in the USA, and fully assembled and tested at our advanced electronics facility in Lewisberry, Pennsylvania
  • Hardware included – two sets of new fasteners included for a complete and reliable installation
See More

Delphi – Fuel Pump and Strainer Set: With Seals, Wire Harness and Connector, Isolators, Pall Nuts, Clips (Part No.FE0443)

Fuel Pump and Strainer Set: With Seals, Wire Harness and Connector, Isolators, Pall Nuts, Clips

from

$139.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
  • Improved pump performance as a result of Delphi’s innovative design and durability
  • Restores fast pressure performance and system integrity, translating to better pumping through less energy
  • Part is validated, tested and matched to the right vehicle application
  • When servicing the fuel system, always check the fuel filter for possible replacement
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Always replace the fuel strainer when doing a fuel pump repair
See More

Carquest Premium – Fuel Pump (Part No.E3480528)

Fuel Pump

from

$249.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Fuel Pump (Part No.E2428517)

Fuel Pump

from

$83.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Motorcraft – Fuel Injection Pump Assembly (Part No.PFB-101)

Fuel Injection Pump Assembly

from

$347.99
Motorcraft Pump Assemblies are engineered to Original Equipment standards, including the latest design improvements introduced since the vehicle’s year of manufacture.

Product Features:
  • Each assembly undergoes a stringent battery of tests that include tests for leaks, flow performance, vibration, corrosion resistance and durability, electrostatic discharge and mounting strength.
  • Each design is tested to Ford’s strict performance and durability standards that include Key Life testing to the equivalent of 10-years/150,000 miles.
See More

Delphi – Electric Fuel Lift Pump: With Gasket (Part No.HFP964)

Electric Fuel Lift Pump: With Gasket

from

$312.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • All pumps are functionally tested for correct operation which improves pump reliability
  • Exact fit original equipment replacements means easy installation
  • Consistent pressure at all operating temperatures results in quick start-ups.
  • Pump is designed for diesel engines and applications
  • Always check fuel filter when replacing the fuel pump
See More

Motorcraft – Motorcraft, Fuel Pump (Part No.E3000400346MTR)

Motorcraft, Fuel Pump

from

$625.85
Motorcraft electric fuel pumps are built with the knowledge and experience that only comes from being the original equipment (OE) manufacturer.

Product Features:
  • Same fuel pumps installed during vehicle production
  • Latest engineering enhancements are incorporated
  • Hot fuel handling capabilities translate into consistent performance
  • Optimal check-valve design and outlet fitting configurations are utilized to meet specific vehicle applications
  • Accurate fuel gauge readings are the result of vehicle-specific designs
  • Before they are shipped, fuel pumps are 100-percent flow-tested
  • Units come as complete assemblies for easier, faster installation
See More

Dorman – Diesel Filter Housing Pump (Part No.904-190)

Diesel Filter Housing Pump

from

$181.99
This fuel pump is designed to match the fit and function of the original pump on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel pump is designed to match the fit and function of the original pump on specified applications.
  • Restores functionality – reliable replacement for an original part that has seized or failed due to internal component failure.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Pump Module Assembly M3520810: Fuel Pump, Sending Unit, Wiring Harness and Strainer (Part No.M3520810)

Fuel Pump Module Assembly M3520810: Fuel Pump, Sending Unit, Wiring Harness and Strainer

from

$251.99
Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
  • Includes installation gaskets or seals where applicable
See More

Dorman – Six Wire Electrical Connector Pigtail (Part No.645-909)

Six Wire Electrical Connector Pigtail

from

$38.99
This fuel pump driver module connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel pump driver module connector matches the appearance and function of the factory hardware on specified applications.
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Fuel Pump Driver Module (Part No.FPC1087)

Fuel Pump Driver Module

from

$57.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Mass Air Flow Sensor Connector (Part No.PTA1213)

Mass Air Flow Sensor Connector

from

$32.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1199)

Fuel Pump Module Assembly: With Float Arm

from

$347.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:
  • Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
  • Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
  • Lower amperage draws less load on vehicle’s electrical system
  • Part is validated, tested and matched to the right vehicle application
  • Always be sure to check and clean fuel tank to avoid unnecessary returns
  • Lower failure rates due to its innovative design and durability
See More

Motorcraft – Diesel Fuel Injector (Part No.D2000777360MTR)

Diesel Fuel Injector

from

$1416.32
Diesel Fuel Injector

Spectra Premium – Electric Fuel Pump (Part No.SP114)

Electric Fuel Pump

from

$490.69
CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.

Product Features:
  • Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
  • Advanced polymers, brushes and commutators to ensure long life and durability in multiple fuel blends.
  • High-performance pump section assembly provides superior performance
  • Leading-edge inlet design to increase performance and efficiency, leading to longer life
  • High grade outer shell for life-long corrosion resistance
  • Optimized, precision-wound armature assembly for increased performance
See More

Delphi – Delphi, Fuel Pump (Part No.E3000400346DEL)

Delphi, Fuel Pump

from

$421.48
Delphi Automotive Turbine Fuel Pumps are a family of in-tank pumps designed to provide uninterrupted flow of fuel for gasoline and flexible fuel engines, providing reliability, high efficiency and excellent hot fuel delivery performance. Delphi T-23 Automotive Turbine Fuel Pumps provide excellent low-fuel delivery performance for reliable, uninterrupted fuel flow. They help reduce evaporative emissions because they generate low heat and vapors.

Product Features:
  • Proven in-field performance in global applications
  • Flexibility to adjust product features and performance to suit customer needs through selection of armature windings, pump section configuration, and component features
  • Carbon commutator technology provides improved durability and robust performance for gasoline and flexible fuel, with blends up to E100
  • Highly integrated design for lower overall cost
  • Compact 39mm diameter that enables excellent packaging flexibility
  • Robust durability with dry run capability
  • Exceptional low voltage startability
See More

Autopart International Inc – Fuel Pump (Part No.E30001999882API)

Fuel Pump

from

$367.15
Fuel Pump

Spectra Premium – Fuel Pump Assembly (Part No.SP2069M)

Fuel Pump Assembly

from

$280.99
CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.

Product Features:
  • Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
  • Triple barb hose fitting provides superior, long-lasting seal
  • Superior return porting for optimum fuel flow
  • Enhanced pump to flange harness design provides worry-free electrical performance
  • Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
  • Gradient density, dual zone filtration designed for better contamination resistance
See More

Carquest Premium – Fuel Pump Driver Module (Part No.FPC1093)

Fuel Pump Driver Module

from

$243.99
Fuel Pump Driver Module

Dorman – Fuel Pump Control Module (Part No.E3006448011DOR)

Fuel Pump Control Module

from

$124.82
Re-engineered to address failure points in the original materials and design, Dorman’s Fuel Pump Driver Module is powder-coated for high corrosion resistance and long-lasting durability. Newly designed rubber bushings on the mounting screws help to sustain years of service.

Product Features:
  • Dorman’s fully re-engineered micro-processor provides greater response time and reliability
  • Comes with rubber mounting bushings to position the module away from the steel frame for increased protection from corrosion and damage to the metal housing
  • Regulates voltage to the fuel pump in order to maintain proper fuel pressure over the full operating range of the engine
  • Vehicle simulator testing has been conducted on this part to ensure quality performance
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Fuel Cap Tester Adapter

from

$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Fuel Cap Tester Adapter

from

$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Top Picks for 2006 Ford F-450 Super Duty Gas Caps

Upgrade Ford F-450 Super Duties with top-quality Gas Caps parts, including 27 OEM and aftermarket selections for your 2006 model.

Carquest Premium – Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Diesel Fuel Cap: 10819D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$15.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Keyed Alike Locking Fuel Cap

from

$11.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591D)

Keyed Alike Locking Fuel Cap

from

$16.79
None

Product Features:
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830)

Fuel Cap: 10830, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Motorcraft – Motorcraft Fuel Tank Cap (Part No.E2010196383MTR)

Motorcraft Fuel Tank Cap

from

$24.36
With Retaining Straps Motorcraft offers a wide variety of caps to support the ongoing maintenance needs of Ford and Lincoln vehicles.

Product Features:
  • Motorcraft provides extensive coverage of these caps
  • Available for most Ford and Lincoln vehicles
  • Locking sets are offered for dual-tank applications that contain two matching caps with four keys
  • Both locking- and non-locking styles are available
See More

Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack

from

$14.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$15.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10840, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10840)

Fuel Cap: 10840, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$21.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Gas Cap: Twist On, Reduces Air Pollution, 1 Pack

from

$15.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10501)

Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$16.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
  • “Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.
See More

Carquest Premium – Locking Fuel Cap (Part No.10591)

Locking Fuel Cap

from

$23.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10591D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10591D)

Locking Fuel Cap: 10591D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$21.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10510)

Locking Fuel Cap: 10510, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$32.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Diesel Fuel Cap: 10830D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830D)

Diesel Fuel Cap: 10830D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$12.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Keyed Alike Locking Fuel Cap

from

$6.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Locking Fuel Cap (Part No.10501D)

Locking Fuel Cap

from

$31.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack

from

$23.99
Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.
See More

Motorad – Tethered Fuel Cap (Part No.MGC839T)

Tethered Fuel Cap

from

$30.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Keyed Alike Locking Fuel Cap

from

$10.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Locking Fuel Cap: 17501D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.17501D)

Locking Fuel Cap: 17501D, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$22.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Gates – Fuel Tank Cap (Part No.E20101064853GAT)

Fuel Tank Cap

from

$34.86
Fuel Tank Cap

Motorcraft – Motorcraft Fuel Tank Cap (Part No.E2010357406MTR)

Motorcraft Fuel Tank Cap

from

$31.86
With Retaining Straps Motorcraft offers a wide variety of caps to support the ongoing maintenance needs of Ford and Lincoln vehicles.

Product Features:
  • Motorcraft provides extensive coverage of these caps
  • Available for most Ford and Lincoln vehicles
  • Locking sets are offered for dual-tank applications that contain two matching caps with four keys
  • Both locking- and non-locking styles are available
See More

Motorcraft – FUEL TANK CAP (Part No.FC-920)

FUEL TANK CAP

from

$22.99
FUEL TANK CAP

Motorad – Tethered Fuel Cap (Part No.MGC517T)

Tethered Fuel Cap

from

$20.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Come pre-assembled for quick and easy installation.
  • Several fastener options to work with any fuel cap compartment configuration
  • Fits vehicles orginally equipped with tether
  • Reduces air pollution with proper sealing and venting
  • Manufactured from durable, long-life materials
See More

In-Demand Oxygen Sensors for 2006 Ford F-450 Super Duties

Select from 13 premium Oxygen Sensors parts for your 2006 Ford F-450 Super Duty, with prices ranging from $49.99 to $89.10.

Motorcraft – O2 Sensor (Part No.DY-1401)

O2 Sensor

from

$71.99
O2 Sensor

NTK – Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit (Part No.22500)

Switching Oxygen Sensor: 4 Wire, 17" Long, Heated, Direct Fit

from

$59.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Bosch – Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit (Part No.15717)

Oxygen Sensor: 4 Wire, 15.43" Long, Heated, Exact Fit

from

$59.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

Bosch – Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit (Part No.15718)

Oxygen Sensor: 4 Wire, 18.94" Long, Heated, Exact Fit

from

$49.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Direct Fit includes OE Connector for easy installation
  • Performance meets or exceeds OE specifications
  • True Direct-fit OE connectors and harness
See More

NTK – Switching Oxygen Sensor: 4 Wire, 15.5" Long, Heated, Direct Fit (Part No.22012)

Switching Oxygen Sensor: 4 Wire, 15.5" Long, Heated, Direct Fit

from

$59.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
See More

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15729)

Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal

from

$69.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:
  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications
See More

Motorcraft – Oxygen Sensor: Engineered for Maximum Performance and Fuel Efficiency (Part No.C5010948703MTR)

Oxygen Sensor: Engineered for Maximum Performance and Fuel Efficiency

from

$89.10
The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.

Product Features:
  • Same components used in the factory
  • Units come ready to plug and play, with no need for modifications
  • OE connectors and wire lengths
  • Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
  • Designed to help provide optimal performance and fuel economy
  • OE enhancements are included in the most current designs
  • Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.
See More

Walker – Walker Oxygen Sensor (Part No.C5010380927WKR)

Walker Oxygen Sensor

from

$84.57
Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.

Product Features:
  • Improved Engine Response and Performance
  • Lower Emissions
  • Improved Fuel Economy
  • Longer Sensor Life
  • Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install
See More

Bosch – Bosch Oxygen Sensor (Part No.C501091453BOS)

Bosch Oxygen Sensor

from

$53.00
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

DENSO – Universal Oxygen Sensor (Part No.C5010121226ND)

Universal Oxygen Sensor

from

$79.49
Denso Universal First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

DENSO – Oxygen Sensor (Part No.C5010690111ND)

Oxygen Sensor

from

$72.92
Oxygen Sensor

DENSO – First Time Fit Oxygen Sensor (Part No.C5010112405ND)

First Time Fit Oxygen Sensor

from

$60.08
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:
  • SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
See More

Carquest Premium – Oxygen Sensor Connector (Part No.PTA3077)

Oxygen Sensor Connector

from

$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Most Sold 2006 Ford F-450 Super Duty Air Flow Sensors

Explore our best-selling Ford parts for the 2006 F-450 Super Duty among 15 OEM and aftermarket options starting from $10.49.

Carquest Premium – Multi Purpose Relay (Part No.RAA1235)

Multi Purpose Relay

from

$10.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Bosch – Fuel Pressure Sensor (Part No.C3001212139BOS)

Fuel Pressure Sensor

from

$76.99
All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:
  • Built-in circuit protection to ensure your electronics and computer systems stay unharmed
  • High reliability of pressure sensing proved in gasoline and diesel direct injection systems
  • Sturdy design, vibration resistant and thermal stability
See More

NTK – Manifold Absolute Pressure Sensor (Part No.MA0198)

Manifold Absolute Pressure Sensor

from

$74.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
  • The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
See More

Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECC1026)

Manifold Absolute Pressure Sensor (MAP)

from

$69.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:
  • CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
  • CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
  • CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
See More

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECC1013)

Fuel Tank Pressure Sensor

from

$80.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Bosch – Oxygen Sensor (Part No.C501041270BOS)

Oxygen Sensor

from

$69.77
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
See More

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.CX-1961)

Original Equipment (O.E.) Sensor Assembly

from

$96.99
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.

Product Features:
  • Inputs from the camshaft, throttle position and crankshaft sensors provide the Power-train Control Module (PCM) the information needed to make the vehicle perform efficiently.
  • The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
  • Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
  • Designed for long service life under harsh under-hood conditions.
  • Designed with OE electrical connectors ensuring proper fits.
  • Application-specific, one-size-fits-all design.
See More

Motorcraft – Air Charged Temperature Sensor (Part No.C6000352514MTR)

Air Charged Temperature Sensor

from

$57.87
Motorcraft Air Charged Temperature Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.

Product Features:
  • Ensures long lasting durability
  • Reliable under extreme conditions
  • Made of high quality material
  • Resists fatigue failure
  • Offers superior service life
See More

Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.DY-1137)

Original Equipment (O.E.) Sensor Assembly

from

$62.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
See More

Delphi – Ambient Air Temperature Sensor (Part No.HTS131)

Ambient Air Temperature Sensor

from

$125.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Delphi products are manufactured in a Delphi ISO certified facility
  • Manufactured to meet or exceed OE requirements
  • Part is validated, tested and matched to the right vehicle application
See More

Delphi – MAP Sensor (Part No.C7044208103DEL)

MAP Sensor

from

$109.48
MAP Sensor

Autopart International Inc – MAP Sensor (Part No.C70441964514API)

MAP Sensor

from

$98.15
MAP Sensor

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10231)

Manifold Absolute Pressure Sensor

from

$86.99
Delphi MAP sensors use the latest OE technology; Internally protected against moisture intrusion and vibration; Manufactured to meet or exceed OE requirements for 100,000 miles.

Product Features:
  • Designed and engineered with Delphi expertise
  • Internally protected against moisture intrusion and vibration
  • Long lasting and durable
  • Designed and engineered with Delphi expertise
See More

Motorcraft – Air Charged Temperature Sensor (Part No.C6000408661MTR)

Air Charged Temperature Sensor

from

$69.90
Motorcraft Air Charged Temperature Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.

Product Features:
  • Ensures long lasting durability
  • Reliable under extreme conditions
  • Made of high quality material
  • Resists fatigue failure
  • Offers superior service life
See More

Walker Products – Air Charge Temperature Sensor (Part No.C6000408661WKR)

Air Charge Temperature Sensor

from

$30.62
The Walker Air Charge Temperature Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Top-Rated Fuel and Emissions Systems Brands For Your 2006 Ford F-450 Super Duty

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2006 Ford F-450 Super Duties. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, Motorcraft, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2006 F-450 Super Duty start at just $3.49 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2006 Ford F-450 Super Duty Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2006 Ford F-450 Super Duty, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 2006 Ford F-450 Super Duty. With over 7 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.49, with an average price of just $10.43. Plus, with over 110 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Exhaust Gas Recirculation (EGR) Valve Gasket
from
$8.79
This product is not rated

Exhaust Gas Recirculation (EGR) Valve Gasket

“”

EGR/EXHAUST AIR SUPPLY GASKET
from
$5.49
This product is not rated

EGR/EXHAUST AIR SUPPLY GASKET

“”

FUEL INJECTOR O-RING SET
from
$29.99
This product is not rated

FUEL INJECTOR O-RING SET

“”

Popular Motorcraft 2006 Ford F-450 Super Duty Fuel and Emissions Systems

Motorcraft auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2006 Ford F-450 Super Duty owner should feel confident when installing genuine Motorcraft parts in their vehicle. To ensure the best fit and performance for your 2006 F-450 Super Duty, Advance Auto Parts carries a full inventory of 27 Motorcraft Fuel and Emissions Systems. Plus you will be keeping your Ford in peak condition while saving money because prices on these Motorcraft Fuel and Emissions Systems range from $10.32 to $1,416.32, plus, with more than 2 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

Oxygen Sensor: Engineered for Maximum Performance and Fuel Efficiency
from
$89.1
This product is not rated

Oxygen Sensor: Engineered for Maximum Performance and Fuel Efficiency

“”

Original Equipment (O.E.) Fuel Injector
from
$322.99
This product is not rated

Original Equipment (O.E.) Fuel Injector

“”

Fuel Injection Pump Assembly
from
$347.99
This product is not rated

Fuel Injection Pump Assembly

“”

FAQs for 2006 Ford F-450 Super Duty Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2006 Ford F-450 Super Duties?

Out of 200 Fuel and Emissions Systems that fit 2006 Ford F-450 Super Duties, the following parts are the top sellers:

What’s the price range for 2006 Ford F-450 Super Duty Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2006 Ford F-450 Super Duty start at $3.49 and go up to $1,416.32 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2006 Ford F-450 Super Duty?

The average price for Fuel and Emissions Systems for the 2006 Ford F-450 Super Duty is $148.60. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Ford F-450 Super Duty model years?

Yes, we currently carry Fuel and Emissions Systems for 25 model years of Ford F-450 Super Duties between 1999 and 2024. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Fuel and Emissions Systems for my 2006 Ford F-450 Super Duty?

The cheapest 2006 Ford F-450 Super Duty Fuel and Emissions Systems we carry in stock are:

What are the top-rated Fuel and Emissions Systems that fit the 2006 Ford F-450 Super Duty?

Out of 2,913 reviews by customers, our 2006 Ford F-450 Super Duty Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2006 Ford F-450 Super Duty and their top-rated products:

What types of Fuel and Emissions Systems do you sell for my 2006 Ford F-450 Super Duty?

Can I get help with 2006 Ford F-450 Super Duty Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Fuel and Emissions Systems and more.

What is your return policy for Ford F-450 Super Duty Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Ford F-450 Super Duty Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.