2006 Ford F-350 Super Duty Brake Parts

Essential 2006 Ford F-350 Super Duty Brake Parts

Carquest Wearever – Parking Brake Cable (Part No.BCA661114)

Parking Brake Cable

from

$45.99
This parking brake cable has been engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles. It features a corrosion-resistant design and durable materials for added strength and longevity.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles
  • Quality design – inner cables are sheathed and lubricated to provide improved durability
  • Long-lasting construction – flexible casings are completely covered with conduit to prevent wear and tear of interior cables
  • Tough materials – zinc-plated fittings prevent corrosion
See More

Yukon Gear – ABS Exciter Ring (Tone Ring) For 10.25" Ford (Part No.33222)

ABS Exciter Ring (Tone Ring) For 10.25" Ford

from

$171.99
ABS exciter ring (tone ring) for 10.25″ Ford. Must be rust free.

Product Features:
  • ABS tone ring for Ford 10.25″
  • Installs onto carrier case
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Carquest Premium – Parking Brake Switch (Part No.SBA2126)

Parking Brake Switch

from

$35.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Motorcraft – Brake Caliper (Part No.N10401349804MTR)

Brake Caliper

from

$120.35
Brake Caliper

Carquest Premium – Brake Fluid Level Sensor (Part No.FFA1001)

Brake Fluid Level Sensor

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Kit (Part No.14166)

Disc Brake Caliper Guide Pin Kit

from

$18.49
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Helps deliver a quieter, more efficient braking system
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Manufactured with quality materials to suppress high stress levels
See More

Wearever – Master Cylinder (Part No.10-4721)

Master Cylinder

from

$109.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest – Multi Purpose Relay (Part No.83A1002)

Multi Purpose Relay

from

$15.79
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA620979)

Brake Hose Assembly: Copper Washers Included

from

$47.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Wagner – Brake QuickStop Parking Brake Shoe Set (Part No.N5000978441WAG)

Brake QuickStop Parking Brake Shoe Set

from

$132.09
Wagner® QuickStop® brake shoes utilize professional-grade friction materials that mirror original equipment and utilize OE-required riveted or bonded configurations.

Product Features:
  • Precision ground maximizes friction-to-drum contact
  • Attached levers and pins included to match OE (on specific applications)
  • Comprehensive coverage for foreign and domestic nameplates
  • Install Wagner with total confidence
See More

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.18-B5350)

Semi Loaded Disc Brake Caliper with Bracket

from

$85.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • 100% new phenolic pistons for improved resistance to heat transfer and miles of worry-free operation in all conditions
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • 100% new phenolic pistons for improved resistance to heat transfer and miles of worry-free operation in all conditions
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

Carquest Wearever – Disc Brake Caliper Bracket Mounting Bolt (Part No.H838)

Disc Brake Caliper Bracket Mounting Bolt

from

$16.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Mounting Bolts sets provide direct replacement for a proper fit every time. Our durable steel design helps to install the tool easily.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Manufactured with quality materials to suppress high stress levels
  • Prevents noise and premature wear
  • Corrosion resistant coating for long-lasting durability against harsh roads
  • Finished off with thread locker for extra security
See More

PowerStop – Red Powder Coated Calipers (Part No.S5022)

Red Powder Coated Calipers

from

$294.99
PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!

Product Features:
  • All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks.
  • New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets
  • High temperature EPDM rubber for extended life.
  • Premium silicone lubrication provides smoother operation.
  • The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.
See More

Carquest Wearever – Disc Brake Caliper Repair Kit (Part No.41253)

Disc Brake Caliper Repair Kit

from

$6.99
Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Increases the life span of the brake pads
  • Restores brakes to like-new performance
  • Prevents noise and premature wear
  • Direct replacement for a proper fit
See More

Dorman – Rivet-Screw In-Hole Diameter .250 In-Head Diameter .610 In-Length .9 In (sold by each) (Part No.700-864)

Rivet-Screw In-Hole Diameter .250 In-Head Diameter .610 In-Length .9 In (sold by each)

from

$2.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Carquest – A/C and Heater Relay (Part No.R3146)

A/C and Heater Relay

from

$19.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Points feature one-piece nylon breaker arms where specified providing longer tune-up life
  • Featuring brass or copper contacts where specified for extended wear
  • All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Dorman – Brake Dust Shield (Part No.N1086830106DOR)

Brake Dust Shield

from

$238.07
Brake Dust Shield

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.16208)

Disc Brake Caliper Guide Pin Boot Kit

from

$8.99
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
See More

Dorman – Spindle Nut And Dust Cap Kit (Part No.615-019)

Spindle Nut And Dust Cap Kit

from

$22.99
This spindle lock nut kit includes hardware designed to match the original hardware that can become worn out after frequent servicing. Each kit contains the cotter pin, spindle nut, spindle washer, castellated nut retainer and dust cap to service both front wheels. This kit fits medium- and light-duty Ford vans and trucks to make repacking or replacing front wheel bearings on RWD models a snap.

Product Features:
  • Direct replacement – This spindle lock nut kit includes hardware designed to match the original equipment on specified Ford trucks and vans
  • Ideal solution – this kit is a reliable replacement for original components when completing standard wheel bearing service and replacement
  • Complete solution – this kit features all the parts you need to repack a set of wheel bearings on a RWD Ford (except the grease!)
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Frontline – Brake Rotor G12359SD: Front, Designed for Severe-Duty Performance (Part No.G12359SD)

Brake Rotor G12359SD: Front, Designed for Severe-Duty Performance

from

$224.99
Carquest Frontline brake rotors are manufactured to withstand severe-duty use, making them the ideal choice for police, emergency vehicles, fleet and severe duty applications. Machined, balanced and with more carbon content, Frontline severe-duty castings meet or exceed original equipment specifications, delivering better stopping power, superior heat dissipation, and high tensile strength. Carquest Frontline rotors are fully coated to protect against corrosion and rust build-up, which can shorten rotor life. These rotors are the preferred choice when looking for the best performance on severe-duty applications.Tech Tip: Burnish the pads to the rotor by applying the 30/30/30 rule: 30 stops from 30 mph with 30 seconds of cool down between stops.

Product Features:
  • Designed for severe duty performance
  • Coating promotes unrestricted heat venting by preventing rust and corrosion build-up
  • Manufactured to exact quality and dimensional specifications for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Optimal metallurgy and casting thickness to preventing warping
  • OE vane configuration to dissipate heat and increase pad life
  • Proper harmonic design helps to reduce brake noise
See More

Wagner – ThermoQuiet Semi-Metallic Disc Brake Pad Set (Part No.MX1334A)

ThermoQuiet Semi-Metallic Disc Brake Pad Set

from

$35.00
Wagner TQ® brake pads feature a zero-copper friction formulation and a unique Integrally Molded Insulator (IMI™) technology for quieter operation.

Product Features:
  • QUIET PERFORMANCE — Semi-metallic friction material engineered in-house to allow quiet operation and high performance
  • EXCEPTIONAL BRAKING POWER — Advanced friction formulations dissipate heat for superior braking performance
  • ONE-PIECE DESIGN — IMI™ technology integrates friction material, backing plate and insulator into the brake pad for select applications
  • HARDWARE INCLUDED — Premium stainless-steel hardware included for select applications
  • COMPREHENSIVE COVERAGE — Brake pads available for all vehicle types
  • ZERO COPPER FORMULATION — Features Wagner OE25™ zero-copper friction formulation
See More

Dorman – Help – Brake Hose Connecting Bolt (Part No.13947)

Brake Hose Connecting Bolt

from

$9.99
This brake hydraulic hose to caliper bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this brake hydraulic hose to caliper bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Banjo Bolt Washer 25/64X 5/8 In. (Part No.484-188.1)

Banjo Bolt Washer 25/64X 5/8 In.

from

$5.79
This brake hydraulic hose caliper bolt washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this brake hydraulic hose caliper bolt washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Brake Light Switch Connector (Part No.PTA1877)

Brake Light Switch Connector

from

$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Frontline – Severe Duty Brake Pads With Hardware, Ideal For Heavy Towing And Hauling (Part No.FLD1631)

Severe Duty Brake Pads With Hardware, Ideal For Heavy Towing And Hauling

from

$69.99
Providing maximum braking performance on towing, heavy hauling, and frequent braking applications, Carquest Frontline Severe Duty brake pads are the ideal choice for severe duty applications.

Product Features:
  • Severe duty friction formulations dissipate heat faster for extended pad life
  • On-vehicle testing similar to original equipment tests
  • Patented 4-Layer HEX Shim Technology provides quiet braking
  • HEX shim design utilizes aramid fibers, the same fibers used in bulletproof vests, to reduce shim wear
  • PTFE coated hardware and caliper pin grease included for nearly every application
  • Powder-coated backing plate prevents corrosion
See More

Carquest Premium – Disc Brake Caliper Bracket (Part No.14-1012)

Disc Brake Caliper Bracket

from

$29.99
Carquest Premium Coated Caliper Brackets are engineered and manufactured to meet or exceed OEM performance specifications for strength and durability. Complete inspection of all critical dimensions and bolt threads for a perfect fit and easy installation. OE style rust protective coatings ensure worry-free performance for miles top come.

Product Features:
  • Meets or exceeds OE performance specifications
  • Application-specific brackets for perfect fit and easy installation
  • OE style rust protection extends product life
  • Grease pack is included for easy installation
See More

Motorcraft – Brake Caliper Carrie (Part No.N1036675959MTR)

Brake Caliper Carrie

from

$68.30
Brake Caliper Carrie

2006 Ford F-350 Super Duty Brake Parts

You count on your 2006 Ford F-350 Super Duty to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 169 Brake Parts ranging in price from $0.91 to $750.99, you’re sure to find everything you need for your 2006 Ford F-350 Super Duty.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 17 different brands like Carquest, Carquest Premium, and Carquest Platinum Painted. 2006 Ford F-350 Super Duty Brake Parts start as low as $0.91!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 10,212 extensive product reviews on 2006 Ford F-350 Super Duty Brake Parts. Some of the top-rated Brake Parts products we carry are Semi Loaded Disc Brake Caliper with Bracket with 4.6 stars and ThermoQuiet Semi-Metallic Disc Brake Pad Set with 4.5 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2006 Ford F-350 Super Duty below to get started!

Top-Rated Brake Parts Brands For Your 2006 Ford F-350 Super Duty

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Ford F-350 Super Duty running right for years to come. In our inventory you’ll find brands like Carquest, Carquest Premium, Carquest Platinum Painted, and even more.

Popular Akebono ProAct Brake Parts

You’ll find popular Akebono ProAct brand products across Brake Pads and Shoes. All are waiting to get your 2006 Ford F-350 Super Duty back on the road. Some of the top-rated Akebono ProAct products in these categories are:
Ultra Premium Ceramic Brake Pads
from $78.99
(1)
Ultra Premium Ceramic Brake Pads
Front Brake Pads and Shoes

Top-Rated Carquest Premium Brake Parts


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Brake Parts for your 2006 Ford F-350 Super Duty, and some of our most reviewed Carquest Premium parts include:
Semi-Metallic Brake Pads - (4-Pad Set)
from $52.99
(141)
Semi-Metallic Brake Pads – (4-Pad Set)
Front Brake Pads and Shoes
Semi Loaded Disc Brake Caliper with Bracket
from $101.99
(58)
Semi Loaded Disc Brake Caliper with Bracket
Front Brake Calipers
Semi Loaded Disc Brake Caliper with Bracket
from $101.99
(56)
Semi Loaded Disc Brake Caliper with Bracket
Front Brake Calipers

FAQs for 2006 Ford F-350 Super Duty Brake Parts

What are the most purchased Brake Parts for the 2006 Ford F-350 Super Duty?

Out of 169 Brake Parts for the 2006 Ford F-350 Super Duty, the most popular in our inventory are:
Brake Rotor: Meets or Exceeds OE Specs
from $192.99
(34)
Brake Rotor: Meets or Exceeds OE Specs
Front Brake Rotors
Disc Brake Caliper Guide Pin Boot Kit
from $6.49
(20)
Disc Brake Caliper Guide Pin Boot Kit
Brake Caliper Guide Pin Boot Kits

What are the top-rated 2006 Ford F-350 Super Duty Brake Parts?

Top-rated Brake Parts for your 2006 Ford F-350 Super Duty based on customer reviews/ratings are:
Semi Loaded Disc Brake Caliper with Bracket
from $91.99
(40)
Semi Loaded Disc Brake Caliper with Bracket
“Finally a company that made the assembly with the clips easy. Normally you have to fight like crazy to get the pads in with the clips. Had the pads an”
ThermoQuiet Semi-Metallic Disc Brake Pad Set
from $35.00
(38)
ThermoQuiet Semi-Metallic Disc Brake Pad Set
“These pads do not require anti-squeal shims. Just put Sil-Glyde on the back and you are set to go. Also look for rebates from Wagner a couple of tim”
Semi Loaded Disc Brake Caliper with Bracket
from $91.99
(32)
Semi Loaded Disc Brake Caliper with Bracket
“Installed easily”