2006 Ford F-250 Super Duty Ignition and Tune-Up Products

Name: Glow Plug Control Module
Brand: Motorcraft
SKU: F1105301738MTR
Price: 99.53 USD

Below you will find various in-demand Ford Ignition and Tune-Up Products, components and accessories for your 2006 F-250 Super Duty. Advance Auto Parts has popular F-250 Super Duty parts like Ignition Coils and Boots, Ignition Boots, Spark Plugs and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other F-250 Super Duty model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2006 Ford F-250 Super Duty Ignition and Tune-Up Products below and start saving instantly.

Popular 2006 Ford F-250 Super Duty Ignition and Tune-Up Products Categories

Diesel Glow Plug Controllers

Ignition Coil Boots

Direct Ignition Coil Kits

Standard Spark Plug Wires

Knock Sensors

Ignition Switch Actuators

Ignition Module and Controls

Diesel Glow Plug Wiring Harness

Ignition Coil Connectors

Ignition Starter Switches

Ignition Pulsator Rings

Fuel Filter Housing Seal Kits

Ignition Coil Wires

Essential Ignition and Tune-Up Products for 2006 Ford F-250 Super Duties

from

$99.53

Today’s automotive systems are very complex, so it’s critical to use the parts that support Ford and Lincoln vehicles. Motorcraft electronic and electromechanical control modules recommended by Ford Motor Company. Features and Highlights

Product Features:

Solid-state circuitry contains a unique override to protect against high- voltage spikes, which can damage the diodes and transistors
Special mounting is utilized to withstand vibration
Temperature stabilizer ensures proper operation during extreme weather conditions
Special weather-tight seal material is employed
Specially vented base guards against water entry
Electromechanical regulator contact points are manufactured from gold, platinum, silver or tungsten to provide maximum conductivity and wear resistance

from

$18.49

Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spark plugs are available for a broad range of applications, including domestic and import cars and trucks of all makes and sizes.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$199.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:

Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
Advanced Bobbin Technology
Direct Plug In Replacement results in a Direct OE Fit
OBD ll Safe, so you won’t be throwing codes, just sparks
Standard Motor Products SMP Fd-503
MSD 8242 82428
8 Pack

from

$49.99

CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.

Product Features:

Provides excellent heat resistance as well as maximum protection against spark loss.
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility
OE design provides an exact fit for your application
Multipack provides one time replace all COP for better deal

from

$868.99

DIS-4 is capable of firing up to four coil packs or four individual coils. Each control delivers full power capacitive discharge sparks from idle through racing rpm. Below 3,000 rpm there is a series of multiple sparks that last for up to 20 degrees of crankshaft rotation to improve idle, starting and throttle response. The adjustable features of the DIS ignitions have also been upgraded with rotary dials. These provide easier, and more precise adjustments of the overrev limiter and the hole shot rev limit. Also, there is now a step retard that can be wired directly to a nitrous system or switch for activation. For use on 6 or 8 cylinder engines with two, three or four coil packs.

Product Features:

Two Step Rev Control
Step Retard
LED Monitor
Features Are Adjustable w/Rotary Switches

from

$83.99

Diesel engine having cold start issues or a check engine light? This replacement glow plug wiring harness matches the fit and function of the original equipment harness and is made of quality materials for durability and reliable performance.

Product Features:

Ideal replacement – this diesel glow plug wiring harness matches the fit and function of the original equipment harness to restore proper operation to the glow plug circuit.
Durable construction – this glow plug wiring harness is made of quality materials to ensure reliable performance and a long service life.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$24.79

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$70.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$43.99

This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$46.49

BWD is an aftermarket leader, providing a premium line of engine management products. We are constantly evolving to give BWD customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes

from

$25.99

This ignition switch actuator is designed to match the appearance and function of the original actuator on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this ignition switch actuator is made to match the fit and performance of the original actuator on specific vehicle applications.
Ideal solution – this actuator is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.99

This ignition pulsator ring is designed to match the fit and function of the original ring on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this ignition pulsator ring is designed to match the fit and function of the original ring on specified vehicles.
Ideal solution – this ring is a reliable replacement for an original part that is damaged or has failed due to fatigue.
Durable construction – this ring is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$79.66

Help keep your Ford Power Stroke® Diesel performing at its best

Product Features:

Designed for each application
Connectors help ensure precise fit and easy installation
Regulating and heating coils are designed for fast heat-up of the glow tube
Conical seat ensures a positive seal with the combustion chamber
Threads designed for strength and plated to prevent seizure
Recommended by Ford Motor Company

from

$17.99

NGK metal glow plugs are trusted by OEM diesel engine manufacturers around the world to perform under the harshest conditions. NGK metal glow plugs are equipped with a heating coil in a glow rod made of heat-resistant magnesium oxide between the heating and regulating coils. Magnesium oxide is an outstanding thermal conductor (quickly dissipating heat), while protecting the heating coils from vibration and shock. NGK metal glow plugs feature excellent gas-tight sealing qualities that deliver superior electrical insulation and protection against combustion gas. NGKs metal composition helps reduce carbon accumulation to prevent short circuits, while the unique shell design provides excellent heat transfer.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction metal glow plug
SUPERIOR DURABILITY: Metal glow plugs are designed to withstand thermal shock due to quick changes in temperature
FAST HEATING PERFORMANCE: Fast heat up enables smooth engine starts even in extreme weather conditions
CLEAN PERFORMANCE: Constant afterglow temperature minimize noxious pollutants
RECOMMENDED USAGE: Best for diesel engines with OE metal glow plugs
Superior Performance Under Harsh Conditions: NGK metal glow plugs are trusted by OEM diesel engine manufacturers worldwide for their reliable performance in extreme environments.
Advanced Heating Technology: Equipped with a heating coil in a glow rod made of heat-resistant magnesium oxide, these glow plugs ensure quick heat dissipation and protection against vibration and shock.
Excellent Gas-Tight Sealing: NGK metal glow plugs feature superior gas-tight sealing qualities, providing excellent electrical insulation and protection against combustion gas.
Reduced Carbon Accumulation: The metal composition of NGK glow plugs helps reduce carbon build-up, preventing short circuits and ensuring long-lasting performance.
Efficient Heat Transfer: The unique shell design of NGK metal glow plugs offers excellent heat transfer, enhancing the overall efficiency and reliability of the diesel engine.

from

$62.99

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$103.99

DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:

Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
Identical OE end caps are designed to “click” into place for easy installation and a secure fit
Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

from

$76.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:

These coils provide the exact spark timing that helps maximize the engine and emissions performance
RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
Engineered to help withstand temperature extremes
Internal insulation displacement connection is helps make high-reliability internal connections
Interior insulation helps ensure no internal arcing
Right fit for each application; helps provide ease of installation and removal
High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
Housings engineered to help resist cracking in the most extreme conditions
Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output

from

$117.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$16.07

Spark Plug Conn. Boo

from

$5.79

NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:

PREMIUM GRADE SILICONE: Designed to withstand harsh environments
OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression

from

$68.99

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$97.99

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$66.99

This fuel filter housing seal kit is designed to match the original hardware required to reseal and repair fuel lines on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel filter housing seal kit is designed to match the original hardware required to reseal and repair fuel lines on specified vehicles.
Ideal solution – this kit is a reliable replacement for original components that are leaking or damaged.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.99

Direct replacement – this fuel filter housing seal kit is designed to match the original hardware required to reseal and repair fuel lines on specified vehicles.
Ideal solution – this kit is a reliable replacement for original components that are leaking or damaged.
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$57.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$56.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.

from

$28.99

Bosch OE quality knock sensors for optimum engine protection and fuel consumption reduction up to 9%.

Product Features:

Bosch OE quality knock sensors for optimum engine protection
Bosch OE quality knock sensors increase torque up to 5%
Bosch OE quality knock sensors enable the use of multiple quality fuels with various anti-knock properties

from

$51.99

Upgrade your 2006 Ford F-250 Super Duty with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2006 Ford F-250 Super Duty, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your F-250 Super Duty functioning at its best. At Advance Auto Parts, we offer a wide selection of 65 Ignition and Tune-Up Products for the 2006 Ford F-250 Super Duty, designed to meet your needs without breaking the bank. From Ignition Coils and Boot replacements to Ignition Boots upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2006 Ford F-250 Super Duty at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $5.21 to $868.99, with an average price of $69.31. Our 65 Ignition and Tune-Up Products in stock come from 21 trusted brands, so you’re sure to find the right part for your 2006 Ford F-250 Super Duty without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Ford F-250 Super Duty, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Motorcraft, Autolite, E3, and more. Motorcraft Ignition and Tune-Up Products start at just $11.49 and boast an impressive 5 stars average rating from customers. Autolite and E3 also bring quality to the table, with Ignition and Tune-Up Products available starting at $10.99, and at an average 5 stars rating. With 2,772 customer reviews and counting, our 2006 Ford F-250 Super Duty Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Ford F-250 Super Duty is always ready to roll. We’re committed to providing you with everything you need to keep your F-250 Super Duty in top shape, all in one place. Start shopping confidently below for your 2006 Ford F-250 Super Duty!

Best-Selling Ignition Coils and Boots for 2006 Ford F-250 Super Duties

Enhance the driving experience in your Ford with 24 quality Ignition Coils and Boot components, starting at $6.62.

show more show less

from

$76.99

These coils provide the exact spark timing that helps maximize the engine and emissions performance
RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
Engineered to help withstand temperature extremes
Internal insulation displacement connection is helps make high-reliability internal connections
Interior insulation helps ensure no internal arcing
Right fit for each application; helps provide ease of installation and removal
High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
Housings engineered to help resist cracking in the most extreme conditions
Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output

from

$52.05

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

from

$27.49

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$62.99

As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$39.99

Flame-Thrower COP for 3 valve Ford engines feature an optimized coil design which increases the spark energy by 15% over the OEM coils. Molded epoxy prevents premature failure from moisture or winding fatigue. OEM replacement.

Product Features:

30,000 Volts. Direct OEM replacement.
Optimized coil design yields at least 15% more energy available for the spark than the most common OEM coils.
Provides the spark energy throughout the RPM range and with no energy degradation up to 11,000 engine RPMs. Plated Copper terminals for added current conduction.
Moisture resistant construction ensures long life in harsh environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance.

from

$24.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct improved performance replacements for OEM coils.

Product Features:

Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
Advanced Bobbin Technology
Direct Plug In Replacement results in a Direct OE Fit
OBD ll Safe, so you won’t be throwing codes, just sparks
Standard Motor Products SMP Fd-503
MSD 8242 82428
Resists Shock And Vibration
Resists Corrosion

from

$267.99

30,000 Volts. Direct OEM replacement.
Optimized coil design yields at least 15% more energy available for the spark than the most common OEM coils.
Provides the spark energy throughout the RPM range and with no energy degradation up to 11,000 engine RPMs. Plated Copper terminals for added current conduction.
Moisture resistant construction ensures long life in harsh environments. High-temp boot sustains seal and form. Epoxy molded for shock and vibration resistance.

from

$51.99

Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:

High output
Long spark duration
High dielectric strength
Corrosion resistant connections
High reliability
Long service life

from

$57.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$48.99

Provides excellent heat resistance as well as maximum protection against spark loss.
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility
OE design provides an exact fit for your application
Multipack provides one time replace all COP for better deal

from

$74.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$209.99

MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.

Product Features:

Increased Spark Energy Over The Entire RPM Range Of The Engine
Coils Bolt In Place Of The Factory Units
Accepts OEM Connections For A Simpler Installation

from

$35.49

Pc Cop Coil 97-08 Ford 8/10-Cy

from

$63.99

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$311.99

Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$72.78

Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.

Product Features:

Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
Radio-Frequency Interference (RFI) Suppression
Magnets hold strength for the coil to maintain proper energy output
Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
Coil Housing is engineered to withstand extremes in temperature without cracking

from

$68.99

OE design ensures a tight boot seal that protects against moisture intrusion
High temperature resistant material provides greater protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
Engineered to the specifications used by the original vehicle manufacturer for an exact fit

from

$66.46

Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.

Product Features:

Improved dwell accuracy decreases module and coil temperatures for greater reliability
Noise abatement material between laminations reduces audible coil noise
Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
Lower primary inductance provides high-speed performance
Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
Direct connection to spark plugs (via small boot) eliminates spark plug wires
Composite iron coils provide programmable energy
Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
Radio frequency interference (RFI)suppressor optional

from

$26.67

Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance. WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. WSO Direct Ignition Coils are designed to adapt the required energy output to match engine-operating conditions and deliver the optimum energy level needed to ignite a diluted stratified charge.

Product Features:

OE-Equivalent and a direct fit application
Superior, reliable performance compared to competitive products
Lower cost alternative to original equipment
No additional time consuming steps needed for installation
Factory original equipment connectors
Improved coil efficiency reduces the need to generate excessive high voltage
Designed to provide durability and performance
Noise abatement technology to eliminate audible coil noise
Lower primary inductance provides high-speed performance
Maximum available voltage under all operating conditions
TS 16949 Certification

from

$11.56

The Motorcraft Direct Ignition Coil Boot is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

OES replacement part for your vehicle’s original factory component
Offering the quality, reliability, and durability of OES
Manufactured to OES specification for fit, form, and function

from

$11.29

Spark plug coil boot deteriorated or damaged? This replacement boot matches the fit and function of the original part on specified years, make and models. This boot is made from quality materials to resist damage from heat and oil saturation.

Product Features:

Ideal replacement – this spark plug coil boot directly replaces the boot on specified vehicle years, makes and models.
Durable construction – this spark plug coil boot is made from a tough rubber material that is resistant to damage from exposure to heat and oil saturation
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
Trustworthy design – backed by team of product specialists in the United States

from

$10.84

Direct Ign. Coil Boo

from

$10.02

Designed to be an ideal replacement for your vehicle’s worn equipment, ACDelco Professional, premium aftermarket Auto Wire and Auto Cable products are built to meet nearly every application and budget. ACDelco meet or exceed most original manufacturers’ specifications. Built to exacting specifications, and extensively tested, ACDelco Auto Wires and Auto Cables includes our Original Equipment line for GM vehicles and a select offering of premium aftermarket Professional products for GM and non-GM vehicles. ACDelco Professional, premium aftermarket Direct Ignition Coil-on-Plug Boots seal snugly against the spark plug’s insulator, keeping moisture and contaminates out and promoting longer spark plug life. They are thoroughly engineered to meet or exceed your expectations for fit, form, and function. ACDelco Professional Direct Ignition Coil-on-Plug Boots provide the performance and dependability you expect from ACDelco.

Product Features:

Weather tight boot seal for protection against moisture intrusion
High temperature resistant silicone for protection against thermal overload
Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the spark plug
Premium, high-quality aftermarket spark plug boot Signs that you might need to replace your direct ignition coil-on-plug boot are:
Engine will not start or run
Reduced Power
Excessive tailpipe emissions
Check Engine Light is on
Engine misfire
Reduced fuel economy

from

$6.62

Prenco Coil on Plug Boots provide the best protection possible for your ignition system versus the harsh environment created by the modem day engine. Prenco Coil on Plug Boots are constructed using the finest quality materials and compounds, and produced with superior quality tooling that exactly matches the Original Equipment Boot.

Product Features:

Prenco Coil on Plug Boots are produced using precise computer designed tooling and premium quality materials/compounds that are formulated to perform in extreme temperatures.
Prenco Coil on Plug Boots are designed as a direct replacement for the OE Boot. Springs, grommets and ferrite resistors are provided for all applications where applicable.
Inspect and replace Coil on Plug Boots every 50,000 miles and/or with every spark plug change to ensure optimum engine efficiency and performance.
Replacing Coil and Plug Boots at regular intervals will prevent/correct misfires and will help to minimize further costly damage to Ignition Coils, Sensors, Catalytic Convertors, and ECUs.

Top Picks for 2006 Ford F-250 Super Duty Spark Plugs

Upgrade Ford F-250 Super Duties with top-quality Spark Plugs parts, including 9 OEM and aftermarket selections for your 2006 model.

show more show less

from

$10.99

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.70 is a 16mm, 0.860 reach plug with a taper seat. It fits Ford Triton applications from 2004 to 2008. E3.70 is a unique design that solves a problem with the original OE application. The shell is made as a single piece, as opposed to two pieces, so it resists seizing in the engine and breaking apart when being removed. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE ground electrode is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

The design of the Ford Triton engine can a cause build of carbon on the spark Plug threads, which may make removal difficult. E3.70’s shell is made of a one-piece design, which means it WILL NOT break during removal.
E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
Smoother Acceleration & Idle – The faster flame initiated by the The spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
Enhanced Heat Transfer: Three legs secure the Diamond FIRE electrode to the shell, providing excellent heat transfer and creating more turbulence in the cylinder for better combustion.
Specific Fit for Ford Triton: The E3.70 spark plug is designed to fit Ford Triton applications from 2004 to 2008, ensuring compatibility and optimal performance for these vehicles.

from

$13.99

With over 100 years of engineering expertise and over 11 billion plugs sold, Autolite delivers exceptional performance. Designed and engineered in the USA, these Double Platinum spark plugs feature a high nickel alloy side electrode that maintains a precise gap, and a full platinum tip that ensures virtually no gap erosion for long life. The necked-down center electrode fires quicker and cleaner with less voltage, providing easier starts, quicker acceleration, and improved fuel economy compared to standard plugs. The tapered seat type further enhances the plug’s durability and performance.

Product Features:

High nickel alloy side electrode maintains precise gap
Full platinum tip assures virtually no gap erosion for long life
Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
OE Design Exclusively for Ford 3V Engines: Tailored specifically for Ford 3V engines, ensuring optimal compatibility and performance.
Tapered Seat Type: Designed with a tapered seat type to enhance the spark plug’s durability and overall performance.
Engineered in the USA: Designed and engineered in the USA, leveraging over 100 years of Autolite’s engineering expertise and experience.

from

$12.29

Engineered for superior ignition performance, the Motorcraft High Thread Platinum Spark Plug ensures optimal engine efficiency and longevity. Its high thread design provides a secure fit, reducing the risk of blowouts, while the platinum construction offers excellent durability and consistent performance. Ideal for maintaining peak engine performance, this spark plug is a reliable choice for any vehicle.

Product Features:

Superior Ignition Performance: Engineered to enhance ignition performance, ensuring optimal engine efficiency and longevity.
High Thread Design: Provides a secure fit, reducing the risk of blowouts and ensuring reliable operation.
Platinum Construction: Offers excellent durability and consistent performance, making it a long-lasting choice for your vehicle.
Optimal Engine Efficiency: Ideal for maintaining peak engine performance, ensuring your vehicle runs smoothly.
Reliable Choice: Trusted by Motorcraft, this spark plug is a dependable option for any vehicle, ensuring consistent and efficient ignition.
Superior Ignition Performance: Engineered to enhance ignition performance, ensuring optimal engine efficiency and longevity.
High Thread Design: Provides a secure fit, reducing the risk of blowouts and ensuring reliable operation.
Platinum Construction: Offers excellent durability and consistent performance, making it a long-lasting choice for your vehicle.
Optimal Engine Efficiency: Ideal for maintaining peak engine performance, ensuring your vehicle runs smoothly.
Reliable Choice: Trusted by Motorcraft, this spark plug is a dependable option for any vehicle, ensuring consistent and efficient ignition.

from

$21.99

Champion® Double Platinum Power spark plugs deliver more powerful performance with their premium design. Featuring a platinum center and ground electrode, these spark plugs offer greater wear resistance and maintain stable operating temperatures under all engine loads. The fine-wire center electrode ensures greater ignitability, while the V-trimmed ground electrode promotes sharper spark focus. The exclusive Heat-Active alloy allows the electrodes to reach optimal temperature, ensuring maximum life and consistent performance.

Product Features:

Double Platinum Power – Premium Spark Plug. More Powerful Performance.
Platinum center and ground electrode for greater wear resistance
Maintains stable operating temperature under all engine loads
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
OE Replacement: Designed as an original equipment replacement, ensuring compatibility and reliable performance for your vehicle.

from

$18.49

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$11.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

High nickel alloy side electrode maintains precise gap
Full platinum tip assures virtually no gap erosion for long life
Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)

from

$169.99

ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Product Features:

One Piece Design – Won’t break off in head during removal like two piece designs
The Copper core is a better conductor than Iridium or Platinum plugs
Copper dissipates heat much better than other materials
C
Unlike Iridium or Platinum plugs, the ACCEL HP plugs are gapable
Machine rolled threads for precise thread engagement
One step colder than stock

from

$165.99

For use with Black Coil Boot, OE Coil 3L3E or ACCEL 140033 or 140033-8
One Piece Design – Won’t break off in head during removal like two piece design
Copper Core – Copper is a better conductor than Iridium or Platinum plugs
Heat Dissipation – Copper dissipates Heat Much better than other materials
C
See PN 346 for Single Spark Plug
Gapable – Unlike Iridium or Platinum
Machine Rolled Threads-Precise thread engagement

from

$18.49

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

In-Demand Ignition Wires for 2006 Ford F-250 Super Duties

Select from 5 premium Ignition Wires parts for your 2006 Ford F-250 Super Duty, with prices ranging from $5.21 to $22.99.

show more show less

from

$8.99

Provides excellent heat resistance as well as maximum protection against spark loss.
Durable silicone compound for resistance to high heat or abrasion
Spring included with the coil boot
Design for direct compatibility
OE design provides an exact fit for your application
Multipack provides one time replace all COP for better deal

from

$22.99

Motorcraft Ignition Boots are engineered to provide original equipment performance and reliability. All Motorcraft parts undergo rigorous lab and real-world tests in order to meet strict Ford engineering standards. Terminal ends are designed to help ensure they do not separate from the cable under normal service conditions. High dialectic insulation helps maintain and control voltage delivery while reducing radio frequency interference. The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles

Product Features:

Backed by Motorcraft’s Service Parts Warranty
Designed for long life – key life durability testing (equivalent to 10 years/150,000 miles) is conducted in addition to on-vehicle durability testing.
Boots must pass submerged and pressurized leak tests, as well as low temperature cycle tests.
Durability tests subject boots to 225,000 performance cycles including temperature extremes from minus 40 degrees F to 275 degrees F.
Motorcraft ignition components help prevent false check engine lights.

from

$16.07

Spark Plug Conn. Boo

from

$12.13

The Motorcraft Direct Ignition Coil Boot is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

OES replacement part for your vehicle’s original factory component
Offering the quality, reliability, and durability of OES
Manufactured to OES specification for fit, form, and function

from

$5.21

Direct Ign. Coil Boo

Most Sold 2006 Ford F-250 Super Duty Glow Plugs

Explore our best-selling Ford parts for the 2006 F-250 Super Duty among 10 OEM and aftermarket options starting from $11.49.

show more show less

from

$11.49

Motorcraft Diesel Glow Plugs are engineered to meet strict Ford engineering standards to provide original equipment performance and reliability

Product Features:

Backed by the Motorcraft Service Parts Warranty
Motorcraft Glow Plugs are engineered to provide original equipment performance and reliability
All Motorcraft Ignition part designs undergo rigorous lab and real world tests in order to meet Ford engineering standards.
Engineered to tight tolerances to help provide excellent performance

from

$238.99

An essential component in the diesel electronic control system, the glow plug control module interfaces with the vehicle’s powertrain control module to energize the glow plugs to assist with cold engine start-up. Failure can result in hard-starting and/or illumination of the engine malfunction indicator or check engine lamp.

Product Features:

Original equipment fit, form and function
Direct OE replacement
No programming or reflash required

from

$14.99

Starting a diesel engine? Check out Autolite glow plugs. They’re dependable and long-lasting, the perfect plug for a variety of diesel applications.

Product Features:

Diesel engines depend on high heat in the combustion chamber to ignite the fuel. When you cold start a diesel engine, there isn’t enough heat to ignite. Glow plug warms the combustion chamber to start the fuel ignition.
These glow plugs fit a variety of diesel applications. If you’re experiencing problems starting your diesel engine, it may have burnt out glow plugs.
Reaches temperatures hot enough to start in 30 seconds or less
For dependability and long-lasting performance, use Autolite glow plugs

from

$60.99

Ideal replacement – this diesel glow plug wiring harness matches the fit and function of the original equipment harness to restore proper operation to the glow plug circuit.
Durable construction – this glow plug wiring harness is made of quality materials to ensure reliable performance and a long service life.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$50.99

Ideal replacement – this diesel glow plug wiring harness matches the fit and function of the original equipment harness to restore proper operation to the glow plug circuit.
Durable construction – this glow plug wiring harness is made of quality materials to ensure reliable performance and a long service life.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$209.99

from

$73.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$169.99

CARDONE Remanufactured Diesel Glow Plug Controllers are functionally tested to recreate true on car performance. Once disassembled, all broken wire leads are resoldered and broken connectors are repaired with improved, OE like materials, providing you a product that meets or exceeds OEM performance.

Product Features:

Critical electrical component materials are upgraded to improve unit longevity.
Internal wire bonding process is improved to eliminate the original cause of failure.
Full functional testing mimics typical vehicle driving conditions to ensure superior performance.
Guaranteed fit and function.
Meets or exceeds O.E.M performance.

from

$22.49

The Motorcraft Glow Plug is a high-quality diesel glow plug designed to provide reliable and efficient performance for diesel engines. It is made with premium materials and advanced technology to ensure optimal combustion and reduce emissions. The Motorcraft Glow Plug is engineered to withstand extreme temperatures and harsh conditions, making it ideal for use in heavy-duty vehicles and equipment. It features a durable construction that resists corrosion and wear, ensuring long-lasting performance and reliability. With its superior design and performance, the Motorcraft Glow Plug is an excellent choice for anyone looking for a reliable and efficient diesel glow plug for their vehicle or equipment.

from

$17.99

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction metal glow plug
SUPERIOR DURABILITY: Metal glow plugs are designed to withstand thermal shock due to quick changes in temperature
FAST HEATING PERFORMANCE: Fast heat up enables smooth engine starts even in extreme weather conditions
CLEAN PERFORMANCE: Constant afterglow temperature minimize noxious pollutants
RECOMMENDED USAGE: Best for diesel engines with OE metal glow plugs
Superior Performance Under Harsh Conditions: NGK metal glow plugs are trusted by OEM diesel engine manufacturers worldwide for their reliable performance in extreme environments.
Advanced Heating Technology: Equipped with a heating coil in a glow rod made of heat-resistant magnesium oxide, these glow plugs ensure quick heat dissipation and protection against vibration and shock.
Excellent Gas-Tight Sealing: NGK metal glow plugs feature superior gas-tight sealing qualities, providing excellent electrical insulation and protection against combustion gas.
Reduced Carbon Accumulation: The metal composition of NGK glow plugs helps reduce carbon build-up, preventing short circuits and ensuring long-lasting performance.
Efficient Heat Transfer: The unique shell design of NGK metal glow plugs offers excellent heat transfer, enhancing the overall efficiency and reliability of the diesel engine.

Top-Rated Ignition and Tune-Up Products Brands For Your 2006 Ford F-250 Super Duty

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 2006 Ford F-250 Super Duties. Below you’ll find some of our best rated Ignition and Tune-Up Products from Motorcraft, Autolite, and E3, and more. Ignition and Tune-Up Products from these brands that fit a 2006 F-250 Super Duty start at just $10.99 and are rated as high as 5 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Motorcraft 2006 Ford F-250 Super Duty Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2006 Ford F-250 Super Duty, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Motorcraft ticks all of those boxes. We offer a wide selection of Motorcraft Ignition and Tune-Up Products, specifically designed for the 2006 Ford F-250 Super Duty. With over 12 Motorcraft brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $31.16. Plus, with over 104 customer reviews and an average rating of 5 stars, you can trust that our Motorcraft Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$22.99

This product is not rated

Original Equipment Spark Plug Boot: No core (outer material Rubber) Core, Qty of 1

“”

from
$16.07

This product is not rated

Spark Plug Conn. Boo

“”

from
$18.49

This product is not rated

Spark Plug (PZK14F)

“”

Popular Autolite 2006 Ford F-250 Super Duty Ignition and Tune-Up Products

Autolite auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 2006 Ford F-250 Super Duty owner should feel confident when installing genuine Autolite parts in their vehicle. To ensure the best fit and performance for your 2006 F-250 Super Duty, Advance Auto Parts carries a full inventory of 3 Autolite Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Autolite Ignition and Tune-Up Products range from $11.99 to $14.99, plus, with more than 35 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from
$13.99

(35)

High Thread Pro Spark Plug: OE Design Exclusively for Ford 3V Engines, Finewire

“good product”

from
$14.99

This product is not rated

Diesel Engine Glow Plug: High Intensity Concentrated Heat, Reliable Starts

“”

from
$11.99

This product is not rated

High Thread Pro Spark Plug: OE Design Exclusively for Ford 3V Engines, Finewire

“”

FAQs for 2006 Ford F-250 Super Duty Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2006 Ford F-250 Super Duties?

Out of 65 Ignition and Tune-Up Products that fit 2006 Ford F-250 Super Duties, the following parts are the top sellers:

Spark Plug (PZK14F) (11796548) – $18.49
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (10427066) – $10.99
High Thread Pro Spark Plug: OE Design Exclusively for Ford 3V Engines, Finewire (20650267) – $13.99

What’s the price range for 2006 Ford F-250 Super Duty Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2006 Ford F-250 Super Duty start at $5.21 and go up to $868.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2006 Ford F-250 Super Duty?

The average price for Ignition and Tune-Up Products for the 2006 Ford F-250 Super Duty is $69.31. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford F-250 Super Duty model years?

Yes, we currently carry Ignition and Tune-Up Products for 25 model years of Ford F-250 Super Duties between 1999 and 2024. Ignition and Tune-Up Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Ignition and Tune-Up Products for my 2006 Ford F-250 Super Duty?

The cheapest 2006 Ford F-250 Super Duty Ignition and Tune-Up Products we carry in stock are:

Direct Ign. Coil Boo (12504569) – $5.21
Prenco Direct Ignition Coil Boot (10809130) – $6.62
Coil on Plug Boot (11000170) – $8.49
Coil On Plug Insulator Boot: Spring included, Designed for direct fit (10002571) – $8.99
Professional Direct Ignition Coil Boot (11813359) – $10.02

What are the top-rated Ignition and Tune-Up Products that fit the 2006 Ford F-250 Super Duty?

Out of 2,772 reviews by customers, our 2006 Ford F-250 Super Duty Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 2006 Ford F-250 Super Duty and their top-rated products:

Spark Plugs
- High Thread Platinum Spark Plug: Enhances Ignition Performance (10058908) – $12.29
- High Thread Pro Spark Plug: OE Design Exclusively for Ford 3V Engines, Finewire (20650267) – $13.99
- DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (10427066) – $10.99
Ignition Wires
- High Thread Platinum Spark Plug: Enhances Ignition Performance (10058908) – $12.29
- High Thread Pro Spark Plug: OE Design Exclusively for Ford 3V Engines, Finewire (20650267) – $13.99
- DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (10427066) – $10.99

What types of Ignition and Tune-Up Products do you sell for my 2006 Ford F-250 Super Duty?

As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2006 Ford F-250 Super Duty:

Can I get help with 2006 Ford F-250 Super Duty Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.

What is your return policy for Ford F-250 Super Duty Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Ford F-250 Super Duty Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Ford F-250 Super Duty Ignition and Tune-Up Products

Motorcraft – Glow Plug Control Module (Part No.F1105301738MTR)

Motorcraft – Spark Plug (Part No.SP-546-X)

Accel – Ford 2 Valve Engine Performance Coil Kit (Part No.140032-8)

Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-001FMP)

MSD Ignition – MSD DIS-4 Plus; Distributorless 4 Channel (Part No.62152)

Dorman – Glow Plug Harness (Part No.904-248)

Carquest Premium – Ignition Switch (Part No.CSC2673)

Carquest – Ignition Switch (Part No.CS804)

Dorman – Ignition Coil Connector (Part No.645-570)

Carquest – Ignition Coil Connector (Part No.PT2268)

Dorman – Help – Ignition Cylinder Actuator (Part No.47510)

Dorman – Ignition Pulsator Ring (Part No.917-060)

Motorcraft – Motorcraft Glow Plug (Part No.F1100520296MTR)

NGK – Metal Glow Plug: Self-Regulating Metal Type, Y4002J (Part No.97190)

DENSO – Coil On Plug Boots-8 (Part No.671-8110)

DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8173)

Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-511)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1044)

Motorcraft – Spark Plug Conn. Boo (Part No.F10111062134MTR)

NGK – Coil on Plug Boot (Part No.58975)

DENSO – Coil On Plug Boots-10 (Part No.671-0007)

DENSO – Coil On Plug Boots-8 (Part No.671-8172)

Dorman – Fuel Bowl Seal Kit (Part No.904-535)

Dorman – Fuel Bowl Seal Kit (Part No.904-498)

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3779)

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0301)

Bosch – Knock Sensor (Part No.0261231316)

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3684)

Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-511)

Driveworks – Coil on Plug Coil (Part No.26338)

Carquest – Air Charge Temperature Sensor Connector (Part No.PT5749)

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-6003)

PerTronix – Flame Thrower Coil On Plug: 2004-2008, Ford 3 Valve, 15% More Spark Energy, 1 ea, OE Replacement (Part No.30731)

Accel – High-Performance Ignition Coils for Ford 2-Valve Engines (Part No.140032)

PerTronix – Flame Thrower Coil On Plug: 2004-2008, Ford 3 Valve, 15% More Spark Energy, 8 ea, OE Replacement (Part No.30738)

Carquest – Ignition Coil (Part No.26C1002)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1517)

Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-002FMP)

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48717)

MSD Ignition – Coils; Street Fire; Ford 4.6/5.4L 3-Valve 04-08 8-Pack (Part No.55138)

Accel – Pc Cop Coil 97-08 Ford 8/10-Cy (Part No.420001)

DENSO – Coil On Plug Boots-8 (Part No.671-8164)

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 8 Count (Part No.EBC1517-8)

Motorcraft – Direct Ignition Coil – (Coil on Plug) (Part No.F3005387615MTR)

DENSO – Coil On Plug Boots-10 (Part No.671-0007)

Delphi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005178371DEL)

WSO – Direct Ignition Coil – (Coil on Plug) (Part No.F3005387615WSO)

Motorcraft – Direct Ignition Coil Boot (Part No.F3006412382MTR)

Dorman – Help – Spark Plug Boot Replacement (Part No.49814)

Autopart International Inc – Direct Ign. Coil Boo (Part No.F30061967136API)

ACDelco – Professional Direct Ignition Coil Boot (Part No.F3006612478ACD)

Prenco – Prenco Direct Ignition Coil Boot (Part No.F3006239277PRN)

NGK – Coil on Plug Boot (Part No.58938)

Accel – Pc Cop Boots 97-11 Ford 8-Cyl (Part No.128041)

Accel – Pc Cop Boots 05-08 Ford 8-Cyl (Part No.128043)

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.70)

Autolite – High Thread Pro Spark Plug: OE Design Exclusively for Ford 3V Engines, Finewire (Part No.HT15)

Motorcraft – High Thread Platinum Spark Plug: Enhances Ignition Performance (Part No.SP-515)

Champion – Double Platinum & Power Spark Plug Exceptional Performance, OE Replacement 7989 (Part No.7989)

Motorcraft – Spark Plug (PZK14F) (Part No.SP-546)

Autolite – High Thread Pro Spark Plug: OE Design Exclusively for Ford 3V Engines, Finewire (Part No.HT2)

Accel – Spark Plug: Ford Early V8 3-V: 1 Range Colder: 8Pk (Part No.8160C1)

Accel – Spark Plug:8Pk Of 346 (Part No.8160)

Motorcraft – Spark Plug (Part No.SP-546-X)

Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7007)

Motorcraft – Original Equipment Spark Plug Boot: No core (outer material Rubber) Core, Qty of 1 (Part No.WR-6131)

Motorcraft – Spark Plug Conn. Boo (Part No.F10111062134MTR)

Motorcraft – Direct Ignition Coil Boot (Part No.F3006374067MTR)

Autopart International Inc – Direct Ign. Coil Boo (Part No.F30061945676API)

Motorcraft – Original Equipment (O.E.) Glow Plug (Part No.ZD-13)

Carquest Premium – Glow Plug Control Module (Part No.AC20392)

Autolite – Diesel Engine Glow Plug: High Intensity Concentrated Heat, Reliable Starts (Part No.1117)

Dorman – Glow Plug Harness (Part No.904-249)

Dorman – Glow Plug Harness (Part No.904-453)

Carquest Premium – Diesel Glow Plug Controller (Part No.RAC1781)

Carquest Premium – Diesel Glow Plug Connector (Part No.ABC2852)

Cardone – Remanufactured Diesel Glow Plug Controller (Part No.73-72000)

Motorcraft – Spark Plug (Part No.ZD-32)

NGK – Metal Glow Plug: Self-Regulating Metal Type, Y4002J (Part No.97190)