2006 Ford Expedition Air Suspension and Kits

SuspAirBag/Bellows

SuspAirBag/Bellows

Arnott’s load-leveling suspension rear air spring A-2153 for the 1997-2002 Ford Expedition and 98-02 Lincoln Navigator 4X4 is exclusively assembled and tested for Arnott by world-renowned Continental. This rugged air spring is made with high impact resin top and bottom mounts, multi-ply ContiTech air sleeve and includes a new seal kit. The air spring bladder has a tested burst pressure of more than 480 PSI…6 times its normal working pressure. NOTE: Arnott recommends changing the dryer when replacing air springs. Moisture in your system may damage the compressor.

At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.

Product Features:

• Air Bellow Produced For Suncore By Goodyear
• Lifetime Warranty
• Includes O-Rings
• Includes Instructions

SuspAirBag/Bellows

SuspAirBag/Bellows

Quick Strut Kit

Quick Strut Kit

This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Upgraded replacement – this air suspension compressor line repair union directly replaces the original with stronger material
• Increased durability – brass construction prevents future failures from original brittle plastic design
• Application specific – this union is made for a wide range of Ford, Lincoln and Mercury vehicles
• Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Dorman’s Suspension Self-Leveling Sensor replacements restore sensor’s ability to detect sagging suspension. All Dorman’s Suspension Self-Leveling Sensors are constructed of high quality materials for long service life.

Product Features:

• Vehicle contains three sensors
• Failure sets off a warning light
• Direct fit replacement
• No special tools required

Dorman’s Suspension Self-Leveling Sensor replacements restore sensor’s ability to detect sagging suspension. All Dorman’s Suspension Self-Leveling Sensors are constructed of high quality materials for long service life.

Product Features:

• Vehicle contains three sensors
• Failure sets off a warning light
• Direct fit replacement
• No special tools required

This suspension ride height sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this suspension ride height sensor is designed to match the fit and function of the original sensor on specified vehicles
• Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
• Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This suspension ride height sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this suspension ride height sensor is designed to match the fit and function of the original sensor on specified vehicles
• Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
• Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This air suspension compressor is designed to match the fit and function of the original compressor on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this air suspension compressor is designed to match the fit and function of the original compressor on specified applications
• Ideal solution – this compressor is a reliable replacement for an original part that has failed due to fatigue, moisture infiltration or burnout
• Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
• Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

SuspAirBag/Bellows

This replacement air strut matches the fit and function of the original equipment strut on specified vehicle applications to restore ride control and prevent damage to other air suspension components.

Product Features:

• Ideal replacement – this air strut replaces the original equipment strut on specified vehicle applications to restore ride quality
• Durable construction – this air strut features quality rubber and metal components
• Thoroughly tested – this air strut has undergone vehicle try-on and durability testing for conformance to product standards and quality
• Trustworthy design – backed by team of engineers in the United States

SuspStrutAssy

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

• PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
• REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
• REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
• RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
• EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily