2006 Acura MDX Power Steering Parts

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Imperial mounting kit system
• For installation of transmission coolers and electric fans
• Provides quick, effective installation of Imperial products
• Contains nylon mounting rods, foam pads and locking buttons
• Aftermarket electric fan and cooler mounting rods
• Made with the highest quality materials
• Quality machined for durability
• Removable buttons for relocation
• Aftermarket electric fan and cooler mounting rods
• Made with the highest quality materials
• Quality machined for durability
• Removable buttons for relocation

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission oil cooler hose
• 11/32″ x 4-1/2′
• Designed for transmission fluid applications
• Made for tight-radius applications found in transmission cooler installations
• Compatible with 11/32 in. OEM cooler systems
• Tube made of black chemigum (nitrile)
• Reinforced with 2-spiral synthetic
• Covered in black Hypalon
• Compatible with 11/32 in. OEM cooler systems
• Tube made of black chemigum (nitrile)
• Reinforced with 2-spiral synthetic
• Covered in black Hypalon

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Power steering oil cooler
• Size: 3/4″ x 2-1/2″ x 9″
• For vehicles with 3/8″ I.D. power steering return hose
• Removes destructive heat and prolongs power steering system life
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

• Zinc coated tubes protect against rust and corrosion

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

• Switch sockets allow re-installation of OE pressure sensors
• Zinc coated tubes protect against rust and corrosion
• Banjo end lock tabs prevent hose end from loosening
• Double lock beading with barbed tube end provides superior hose/coupling integrity
• Heat/abrasion tubing protects vital areas
• Restrictor helps absorb vibration and reduce noise
• Movable mount bracket for easy, secure installation
• Silver heat guard protects hose in high heat areas
• Original style fittings, no adapters required

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

• Zinc coated tubes protect against rust and corrosion
• Double lock beading with barbed tube end provides superior hose/coupling integrity
• Heat/abrasion tubing protects vital areas

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

• Zinc coated tubes protect against rust and corrosion
• Double lock beading with barbed tube end provides superior hose/coupling integrity
• Heat/abrasion tubing protects vital areas

Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed to exceed OE blueprints using OE comparable braided rubber compound and include non damaging burr free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose with clamps
• OE quality, braided rubber compound hose
• Pre attached mounting bracket bushing(s), protective jacket(s) and heat sleeve(s), where required
• Ensures proper operation of the power steering system

CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

• Protective coating applied to each unit to extend the life of the unit (where applicable).
• 100 percent performance testing to ensure perfect fit, function and reliable performance.
• 100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
• Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
• 100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
• All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
• Valve housings have polished micro-finish sleeves for durability (where applicable).
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.

We are Modulus, the absolute steering solution for the automotive aftermarket. Our team of seasoned industry experts have put together a line of new, premium rack & pinions that offer job-in-a-box efficiency combined with a 10-year / 100,000-mile warranty. High efficiency starts with solid design. Our R& D team works tirelessly engineering products that match or outperform performance levels of other higher-priced, premium brands. Each unit withstands rigorous endurance testing to ensure exceptional durability.

Product Features:

• Built to meet or exceed O.E.M. performance.
• Supplied with O.E.M. grade seals, O-rings, and boots to provide optimal sealing performance and longevity.
• Environmentally friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
• Application-specific, in-line filter provided with each unit. No filter modifications required.
• Computerized spool valve balancing ensures exceptional steering feel.
• Each unit performance tested to ensure perfect fit, function, and reliable performance.

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

• PWR Rack and Pinions are 100% NEW and Engineered In North America
• All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
• Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
• Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
• Precision Routed and Constructed Fluid Transfer Tubes
• Manufactured to meet or exceed OE requirements
• Engineering, test, and quality validation in the USA

Edelmann Elite power steering rack and pinions represent a step up in quality and performance over typical aftermarket brand power steering racks and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each rack is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every rack has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

• Every component is 100% completely new, never reused
• Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
• Re-engineered designs like internal vent tubing fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
• Complete with Inner Tie Rods & Boots
• Includes necessary hardware where applicable (o-ring, washers, etc…)
• Reinforced Packaging – Assures the product will arrive undamaged and ready for installation
• U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:

• Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
• Performance testing ensures perfect fit, function and reliable performance.
• Computerized spool valve balancing ensures exceptional steering feel.
• Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
• Built to meet or exceed O.E.M. performance.

AAE Remanufactured Hydraulic Power Steering Rack & Pinions include inner tie rods and new bellows secured by OE stainless steel clamps. AAE remanufactures all units in the USA. AAE uses only the highest quality OE components in our remanufacturing process and each unit undergoes a thorough inspection & testing procedure. Every unit is 100% tested to the strictest standards in the industry to ensure the customer is purchasing a quality product. Each unit is electrostatically painted with automotive grade paint to ensure long lasting finish to protect the unit in any driving condition. To ensure long life and OE performance & operation, please flush and fill steering system with OE approved power steering fluid.

Product Features:

• Manufactured Again Certified quality process
• Each unit is 100% hydraulically tested for pressure and flow.
• Racks are remanufactured with OE grade, high temperature seals and O-rings for increased durability and performance.

Our power steering pumps are manufactured with premium components to ensure longevity and reliability under all driving conditions. Each unit is supplied with high temperature seals and load-tested to ensure reliable performance.

Product Features:

• Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
• Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
• Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
• Meets or exceeds O.E. performance.

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

• PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
• All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
• Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
• Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
• Enables you to achieve a more efficient, durable, and professional installation

Edelmann Elite power steering pumps represent a step up in quality and performance over typical aftermarket brand power steering pumps and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each pump is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every pump has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.

Product Features:

• Every component is 100% completely new, never reused
• Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
• Re-engineered designs fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
• Includes necessary hardware where applicable (o-ring, washers, etc…)
• Pre-installed pulley and reservoir for ease and time saving install
• U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

• Double lock beading with barbed tube end provides superior hose/coupling integrity
• Zinc coated tubes protect against rust and corrosion
• Heat/abrasion tubing protects vital areas

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

• A direct fit, replacement hose and line assembly
• SAE J188 compliant high pressure rubber compound hose with internal noise absorber
• SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

Built to withstand a variety of weather conditions and extreme temperatures, our power steering pressure hoses are designed to last through daily wear and tear while delivering smooth and quiet performance, every time. Each hose in the Edelmann Elite line has a durable zinc coating that actively protects against and helps to prevent rust and corrosion damage, and each hose also features innovative heat/abrasion tubing that is specifically designed to hold up to a range of temperatures – from the freezing cold to extreme heat waves. Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity. Every Edelmann Elite hose is equipped with the identical OEM fitting as the hose being replaced. This ensures a good seal when installed properly. All bends are made to the exact specification of the OEM hose. This ensures that the hose will fit in the space provided and takes the course of the original OEM hose. Plews & Edelmann is a leading designer, manufacturer and distributor of a broad range of automotive parts, accessories, gadgets, and tools sold to the vast majority of mass merchant, retail auto parts stores and wholesale automotive parts and industrial distribution outlets worldwide.

Product Features:

• Superior temperature range performance ensures function at any temperature.
• Outstanding impulse durability increases longevity of the hose.
• Constructed to OEM form, fit, and function to ensure ease of installation and ongoing performance.