from

$2.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$49.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$281.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$24.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$122.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$58.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$16.99

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$56.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$75.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$87.99

Daytime Running Light Relay Connector

from

$45.05

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our ignition coils use 100% pure copper windings in the primary and secondary bobbins to improve durability and provide higher resistance to internal shorts and dielectric breakdown
Our premium ignition coils consist of a special blended formula for the best performance, longest life and better heat dissipation
A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$44.99

This EGR tube connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this EGR tube connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$89.99

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$94.99

A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience

from

$21.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$110.07

The complete line of Motorcraft sensors and emission components is recommended by Ford Motor Company exclusively for use in Ford and Lincoln vehicles. Motorcraft oxygen sensors are designed for maximum performance.

Product Features:

Same components used in the factory
Units come ready to plug and play, with no need for modifications
OE connectors and wire lengths
Tight tolerance ranges help minimize repeat repairs and false Check Engine warnings
Designed to help provide optimal performance and fuel economy
OE enhancements are included in the most current designs
Vehicle-specific coverage Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

from

$13.49

Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Product Features:

Direct replacement – these fuel line connectors fit and function like the vehicle’s original equipment connectors for reliable, leak-free performance
Quality construction – manufactured from premium materials for a long service life
Saves money – replace only the part, not the entire assembly
Excellent value – original equipment quality at a lower price

from

$36.27

Fuel Pump Relay

from

$69.99

Wire Assembly

from

$62.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

from

$4.49

Fuel Injection Idle Air Control Valve Gasket

from

$57.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$76.79

All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:

Built-in circuit protection to ensure your electronics and computer systems stay unharmed
High reliability of pressure sensing proved in gasoline and diesel direct injection systems
Sturdy design, vibration resistant and thermal stability

from

$16.99

The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Seals are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.