2005 Ford F-450 Super Duty Drivetrains
More 2005 Ford F-450 Super Duty Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2005 Ford F-450 Super Duty, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2005 Ford F-450 Super Duty Drivetrains
Dorman – Solenoid, 4WD Engage And Emissions Purge (Part No.600-400)
from
$45.49
This 4WD hub locking solenoid directly replaces the original equipment solenoid on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this 4WD hub locking solenoid matches the fit and function of the stock solenoid on certain vehicle applications
- Effective fix – restores control of 4WD system impacted by failed original solenoid
- Thoroughly tested – on-vehicle and laboratory testing ensures trouble-free operation
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – Inner Axle For Dana 60 ’00-’04 F450 & F550 Superduty (Part No.21423)
from
$556.99
Yukon 1541H replacement inner axle for Dana 60 ’00-’04 F450 & F550 Superduty with a length of 38.59 inches and with 35 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy front axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- 35 spline
- 38.59″ long
- Fits Dana Spicer 60 in 2000 and up Ford F450
- Right hand inner
- 5-332X U-joint size
Yukon Gear – Replacement Yoke For Dana 60 With A 1350 U/Joint Size And 35 Spline Pinion (Part No.41028)
from
$532.99
Yukon replacement yoke for Dana 60 with a 1350 U/Joint size and 35 spline pinion.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 35 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
Dorman – Rear Drive Shaft: Adjustable (Part No.976-520)
from
$2555.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – Pinion Nut For Spicer S135 & S150 (Part No.33203)
from
$47.99
Pinion nut for Spicer S135 & S150.
Product Features:
See More
Product Features:
- Pinion nut
- Fits Dana Spicer S135 and S150
Driveworks – Axle Shaft Seal (Part No.S-710493)
Dorman – Transfer Case Motor (Part No.J7100699740DOR)
from
$233.48
Transfer Case Motor
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
National – Bearings (Part No.B-2110)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.28580)
from
$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Chrome Replacement Cover For Dana 80 (Part No.32006)
from
$67.99
Chrome replacement cover for Dana 80.
Product Features:
See More
Product Features:
- Fits Dana Spicer 80
- Chrome
Motive Gear – Differential Carrier Shim Kit (Part No.F10.25SSK)
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Milemarker – Locking Hub Replacement Parts (Part No.449SK)
from
$36.99
For Mopar transfer case 203 N.P. pn(602). 4 x 2 conversion kit service part.
Product Features:
See More
Product Features:
- 4 x 2 Conversion Kit Service Part; Manual Hubs
Motive Gear – Differential Ring and Pinion (Part No.D80-410)
from
$531.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6053)
from
$39.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 60-02; DODGE 64-66; FORD 75-15; GMC 60-02;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1960-2015
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- NO STUDS
Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)
from
$66.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Dana Spicer 70 and 80
Carquest Premium – 4WD Control Switch Connector (Part No.PTA2716)
from
$45.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
USA Standard Gear – Spartan Spring & Pin Kit, Fits Larger Designs (Part No.17010)
from
$26.99
Spartan spring & pin kit, fits larger designs.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60
- Replacement alignment pin and spring kit
Yukon Gear – Zip Locker Bulkhead Fitting Kit (Part No.34000)
from
$36.99
Product Features:
See More
- Bulkhead fitting kit
- Includes bulkhead fitting, outer fitting and o-ring
Spicer – Pinion Seal (Part No.J7010399447SPI)
from
$29.46
Pinion Seal
Dorman – Rear Axle O-Ring Kit (Part No.926-555)
from
$9.79
This axle shaft O-ring matches the fit and function of the original equipment O-ring to maintain a tight seal between the wheel hub and the axle housing. Made of quality materials, this O-ring should be replaced whenever the axle is serviced.
Product Features:
See More
Product Features:
- Ideal replacement – this axle shaft O-ring matches the fit and function of the original equipment O-ring
- Durable materials – this O-ring is made of quality material for a reliable, leak-free repair
- Convenient service item – this axle O-ring should be replaced whenever the axle or wheel hub is serviced
- Thoroughly tested – this part has undergone try-on testing to ensure conformance to product standards
Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)
Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)
MTC – Locking Hub (Part No.K7028814093MTC)
from
$178.01
Locking Hub
Warn – Hub Ford 05 SD Chrome (Part No.95070)
from
$659.99
All metal construction. ZA alloy dial. Thick internal wave spring. Heavy duty detents.
Product Features:
See More
Product Features:
- 9/10 Turn Dial
- Heavy Detents For Positive Engagement
- Wave Spring Technology
- All Metal Construction
- Alloy Dial With Dual Seals
Popular 2005 Ford F-450 Super Duty Drivetrains Categories
2005 Ford F-450 Super Duty Drivetrains
You count on your 2005 Ford F-450 Super Duty to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 323 Drivetrains ranging in price from $3.29 to $2,525.99, you’re sure to find everything you need for your 2005 Ford F-450 Super Duty.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 21 different brands like Moog, National, and DriveWorks. 2005 Ford F-450 Super Duty Drivetrains start as low as $3.29!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,203 extensive product reviews on 2005 Ford F-450 Super Duty Drivetrains. Some of the top-rated Drivetrains products we carry are Multi Purpose Bearing with 4.2 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2005 Ford F-450 Super Duty below to get started!
Top-Rated Drivetrains Brands For Your 2005 Ford F-450 Super Duty
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Ford F-450 Super Duty running right for years to come. In our inventory you’ll find brands like Moog, National, DriveWorks, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 2005 Ford F-450 Super Duty back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 2005 Ford F-450 Super Duty, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 2005 Ford F-450 Super Duty Drivetrains
What are the most purchased Drivetrains for the 2005 Ford F-450 Super Duty?
Out of 323 Drivetrains for the 2005 Ford F-450 Super Duty, the most popular in our inventory are:
What are the top-rated 2005 Ford F-450 Super Duty Drivetrains?
Top-rated Drivetrains for your 2005 Ford F-450 Super Duty based on customer reviews/ratings are:
from
$17.99
(7)
Bearings
“inner spindle bearing for dana 35.direct fit. no issues.goes in nice n snug.”
from
$44.99
(7)
Universal Joint
“Good product; easier to install; one bad thing is caps fall off easy, seems lite on greese”
