2005 Chevrolet Suburban 1500 Suspension Parts

Essential 2005 Chevrolet Suburban 1500 Suspension Parts

Timbren SES – Rubber Spring, Inside Coil Spring Mount, 14,000Lb, Aeon Hollow Rubber (Part No.GMFK25S)

Rubber Spring, Inside Coil Spring Mount, 14,000Lb, Aeon Hollow Rubber

from

$306.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

Rancho – RS5000 Shock Absorber (Part No.RS5274)

RS5000 Shock Absorber

from

$66.99
The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price.

Product Features:
  • Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
  • 5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
  • 1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
  • Protective boot included – Protects the shock rod and oil seal
See More

MOOG – Coil Spring Set (Part No.81246)

Coil Spring Set

from

$181.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Monroe – Electronic to Passive Suspension Conversion Kit (Part No.90026C3)

Electronic to Passive Suspension Conversion Kit

from

$174.99
Convert a vehicle’s factory-equipped air suspension to a conventional suspension with a Monroe® Suspension Conversion Kit. Includes premium components – application-tuned shock/strut, coil spring(s) and hardware.

Product Features:
  • CONVERT YOUR RIDE — An alternative to replacing the OE system, this conversion kit converts a factory electronic suspension to a conventional suspension
  • COMPLETE SOLUTION — Includes premium-quality replacement components – application-tuned shock/strut, coil spring(s) and necessary mounting hardware
  • RESTORES OE SETTINGS — Restores factory ride height and delivers a stable, comfortable ride
  • EASY TO INSTALL — Engineered for superior fit and comes with detailed instructions for a complete and trouble-free bolt-on installation
  • KEEPS ELECTRONIC SUSPENSION LIGHT OFF — A complete solution to keep the electronic suspension light off
See More

Vemo – Suspension Ride Heig (Part No.L7055288284VMO)

Suspension Ride Heig

from

$228.24
Suspension Ride Heig

Monroe – Max-Air Air Shock Absorber (Part No.MA830)

Max-Air Air Shock Absorber

from

$135.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Firestone Ride-Rite – Air Spring, Inside Coil Spring Mnt, 500-1000Lb Leveling, Adjustable From 5-35Psi (Part No.4186)

Air Spring, Inside Coil Spring Mnt, 500-1000Lb Leveling, Adjustable From 5-35Psi

from

$138.99
Discover the difference Coil Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RVs and SUVs. The adjustable Coil Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:
  • Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
  • Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
  • Keep The Vehicle Level, Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
  • Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
  • Discover The Difference Coil Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
  • No Drill Installation
  • Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation
See More

Carquest Premium – Suspension Yaw Sensor (Part No.YWC1044)

Suspension Yaw Sensor

from

$245.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution
See More

ACDelco – Black Multi-Purpose Pigtail Kit with Splices (Part No.PT2887)

Black Multi-Purpose Pigtail Kit with Splices

from

$59.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Suncore – Shock Kit (Part No.2-12S251400-001)

Shock Kit

from

$39.99
Shock Kit

Dorman – Upper Shock Mounting Bushing Insulator (Part No.905-500)

Upper Shock Mounting Bushing Insulator

from

$28.99
This shock mount insulator is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Ride Height Sensor Rear Link Assembly (Part No.927-013)

Ride Height Sensor Rear Link Assembly

from

$39.99
The suspension ride height sensor connector rod is a link connecting the vehicle’s suspension to the ride height sensor to communicate the appropriate ride height of the vehicle. The Dorman Ride Height Sensor connector Rod reduces installation time and saves you money. Now you can easily replace the failed original rod, without the expense and hassle of replacing the entire assembly. Additionally, the ride height sensor connector rod is quality tested and ensures a proper fit every time.

Product Features:
  • Direct replacement for a proper fit every time
  • Constructed of durable steel for long service life
  • Prevents vehicle from becoming stuck in one position
  • This part is quality tested for conformance to product standards
See More

Bilstein – Bilstein Coil Spring (Part No.L5000137431BIL)

Bilstein Coil Spring

from

$113.23
Bilstein OE replacement coil springs restore handling and ensure that ride height and body sway are returned to original specifications.

Product Features:
  • Restores vehicle to OE specifications
  • Superior grade spring steel
  • State of the art computer controlled machines
  • Advanced Zinc Phosphate and Epoxy Powder Paint surface treatment
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Arnott Air Suspension – Arnott Value Rear Air Shock (Part No.AS-2715)

Arnott Value Rear Air Shock

from

$162.99
Arnott’s new economical rear air shock replacement for GM vehicles with Autoride suspension will convert the rear of the vehicle from electronic air shocks to passive air shocks. This adjustable shock will keep the vehicle at the proper height and provide a smooth, comfortable ride. This easy-to-install shock includes an Electronic Bypass Module (EBM) to turn off dashboard warning lights, and an instruction manual. Arnott recommends replacing rear shocks in pairs if converting the Autoride suspension to this passive air shock. Not applicable for vehicles w/Magneride suspension.
See More

MOOG – Shock Absorber Bushing (Part No.K6724)

Shock Absorber Bushing

from

$34.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK29)

Monroe Shock Absorber Air Hose Kit

from

$33.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Monroe – Load Adjusting Shock Absorber (Part No.58639)

Load Adjusting Shock Absorber

from

$220.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Timbren SES – Rubber Spring, Frame Mount, 14000 Lb Weight Capacity Per Set, Aeon Hollow Rubber (Part No.GMFK15A)

Rubber Spring, Frame Mount, 14000 Lb Weight Capacity Per Set, Aeon Hollow Rubber

from

$306.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

ReadyLift – Set Of 2, With Hardware (Part No.67-3809)

Set Of 2, With Hardware

from

$76.99
The 5125 series offers Bilstein technology for custom applications. 5125 series shocks feature Bilstein superior single tube, high gas pressure design for the utmost in consistent fade free performance and long life. Bilstein patented deflective self-adjusting valving delivers improved damping control and a smooth ride on all road surfaces at any speed.

Product Features:
  • Designed To Be Use With Factory Shocks On 3 Inch Rear Lift Blocks
  • Powder Coated Steel Shock Extensions Install In The Factory Upper Rear Shock Mount To Greatly Decrease The Chance Of Over-Extending The Factory Shocks
  • Made In USA
See More

Arnott – Suspension Compresso (Part No.L70153257056ARN)

Suspension Compresso

from

$435.55
Suspension Compresso

Firestone Ride-Rite – Controls Two Air Springs Simultaneously, With Compressor/Gauge/Air Line (Part No.2158)

Controls Two Air Springs Simultaneously, With Compressor/Gauge/Air Line

from

$551.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Single Point Fill (Both Air Springs Fill To The Same Pressure)
  • Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Dorman – Air Suspension Line Repair Kit, With Retainer Clips And T Joint (Part No.949-006)

Air Suspension Line Repair Kit, With Retainer Clips And T Joint

from

$41.99
This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to damage or fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Rancho – RS5000X Shock Absorber (Part No.RS55265)

RS5000X Shock Absorber

from

$96.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
  • MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
  • STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
  • HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
  • SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
  • REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
  • MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
  • BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
  • Rebound Bumper
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

MOOG – Control Arm (Part No.RK643119)

Control Arm

from

$70.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Construction and design validated by MOOG engineers
  • Broad coverage for foreign and domestic applications
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1256)

Multi Purpose Relay

from

$24.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Arnott – Coil Spring Conversion Kit (Part No.L6100464724ARN)

Coil Spring Conversion Kit

from

$826.94
Arnott Part # C-2227 Application: New Coil Spring Conversion Kit for 1995-2002 Land/Range Rover Arnott’s new Land Rover coil spring conversion kit was exclusively designed for the Range Rover. This Land Rover suspension kit converts the entire Range Rover to a reliable coil spring suspension system. To ensure your vehicle’s handling and safety, Arnott’s spring seats are CNC-machined from solid 6061-T6 aluminum alloy. The mounts are designed to bolt directly to the current suspension brackets. This aftermarket kit features powder-coated, variable-rate coil springs. The kit includes step-by-step instructions on how to disarm your EAS alarm.

Product Features:
  • Variable-Rate, Powder-Coated Springs
  • Upper Rubber Isolators
  • Lower Spring Seats
  • CNC-Machined Aluminum Adapters
  • All Necessary Hardware
  • Detailed Instructions
See More

2005 Chevrolet Suburban 1500 Suspension Parts

You count on your 2005 Chevrolet Suburban 1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 138 Suspension Parts ranging in price from $6.29 to $1,217.99, you’re sure to find everything you need for your 2005 Chevrolet Suburban 1500.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 25 different brands like Valvoline, Monroe, and Rancho. 2005 Chevrolet Suburban 1500 Suspension Parts start as low as $6.29!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 3,682 extensive product reviews on 2005 Chevrolet Suburban 1500 Suspension Parts. Some of the top-rated Suspension Parts products we carry are Gas-Matic LT Shock Absorber with 4.3 stars and Monroe Shock Absorber Air Hose Kit with 4.3 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2005 Chevrolet Suburban 1500 below to get started!

Top-Rated Suspension Parts Brands For Your 2005 Chevrolet Suburban 1500

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Chevrolet Suburban 1500 running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Rancho, and even more.

Popular Driveworks Suspension Parts

You’ll find popular Driveworks brand products across Control Arms. All are waiting to get your 2005 Chevrolet Suburban 1500 back on the road. Some of the top-rated Driveworks products in these categories are:
Control Arm Bushing
from $35.49
(1)
Control Arm Bushing
Lower Control Arm Bushings

Top-Rated Monroe Suspension Parts


If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 2005 Chevrolet Suburban 1500, and some of our most reviewed Monroe parts include:
Reflex Monotube Shock Absorber
from $84.99
(93)
Reflex Monotube Shock Absorber
Front Shock and Struts
Reflex Monotube Shock Absorber
from $97.99
(91)
Reflex Monotube Shock Absorber
Rear Shock and Struts
Gas-Matic LT Shock Absorber
from $60.99
(50)
Gas-Matic LT Shock Absorber
Rear Shock and Struts

FAQs for 2005 Chevrolet Suburban 1500 Suspension Parts

What are the most purchased Suspension Parts for the 2005 Chevrolet Suburban 1500?

Out of 138 Suspension Parts for the 2005 Chevrolet Suburban 1500, the most popular in our inventory are:
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from $14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
from $11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Transfer Case Fluid, 1 Quart
from $14.99
(36)
Transfer Case Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids

What are the top-rated 2005 Chevrolet Suburban 1500 Suspension Parts?

Top-rated Suspension Parts for your 2005 Chevrolet Suburban 1500 based on customer reviews/ratings are:
Gas-Matic LT Shock Absorber
from $59.99
(45)
Gas-Matic LT Shock Absorber
“Got these for my 2002 suburban. Fit perfect and has it riding like new again.”
Monroe Shock Absorber Air Hose Kit
from $33.49
(38)
Monroe Shock Absorber Air Hose Kit
“Easy to use designed very well”
Shock-Mate Shock Absorber Boot Kit
from $13.99
(35)
Shock-Mate Shock Absorber Boot Kit
“Used this to replace the torn shock boot on my Goldwing 1500 motorcycle. it fit well, used a tie warp and it was good to go”