Name: Spartan Locker For Toyota V6 With 30 Spline Axles
Brand: USA Standard Gear
SKU: 17034
Price: 549.99 USD

from

$549.99

The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:

Fits Toyota 8″ and V6
Made from 9310 steel for added strength
Works with stock side gears in standard carrier case

from

$23.99

V6 side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits Toyota V6

from

$12.99

Valvoline ATF for MERCON®V Applications is a high-quality transmission fluid meeting and exceeding the requirements of the Ford Mercon V specification which covers most Ford passenger cars and light-duty trucks (except those specifying MERCON®SP, MERCON®LV or Type F fluids), including Lincoln and Mercury, as well as most pre-2006 GM vehicles and many imports. Recommended for use in the following applications: MERCON®V, MERCON®, DEXRON®-III, DEXRON®-II, Caterpillar TO-2, Allison C-4. Other applications include Power steering fluid where a DEXRON® or MERCON® fluid is recommended. Suitable to use in Nissan Matic D, Matic J and Matic K.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$14.99

T100 & Tacoma w/LOC pinion nut.

Product Features:

Pinion nut
Fits Toyota Tacoma and T100 with factory locking differential

from

$51.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits Toyota 8″ with 4 cylinder engine
Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.

from

$11.65

Pinion Seal

from

$11.99

Toyota 8″ & V6 gasket.

Product Features:

Dropout gasket
Fits Toyota 8″ and V6

from

$101.99

7.5″ V6 & 4cyl side shim kit (incl. 7 shims).

Product Features:

Carrier shim kit
Fits Toyota 7.5″

from

$7.99

Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.

Product Features:

Oil baffle
Fits Toyota Landcruiser reverse rotation front

from

$343.99

Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:

Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models
Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications
Durable construction – designed to rigorous standards and tested to ensure performance
Trustworthy solution – backed by team of engineers and quality control specialists in the United States

from

$20.29

Product Features:

CRUSH SLEEVE TOY. FRT END

from

$34.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$276.99

Yukon small hole yoke for ’82 and older Toyota T100 and Tacoma (with locker) with 27 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Toyota Tacoma and T100 with factory locking differential
27 spline

from

$6.99

Ring Gear bolt for Toyota 7.5″, 8″, V6, Landcruiser reverse front & T100/Tacoma w/ factory locker. 11mm x 1.0.

Product Features:

Ring gear bolt for Toyota 7.5″, 8″, 8″ V6, Landrcuiser reverse rotation front and T100 and Tacoma rear with factory locking differential
11mm x 1.0

from

$339.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits Toyota V6 rear
8.125″ ring gear diameter
29 spline pinion
10 ring gear bolts
4.56 ratio

from

$30.99

Preload shim kit for Toyota Landcruiser. Also compatible with Toyota 8″ 4 cylinder & V6 with a solid spacer.

Product Features:

Preload shim kit
Fits 9.5″ Toyota Landcruiser

from

$338.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses high quality bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits standard rotation Toyota 7.5″ with 6 cylinder engine
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$769.99

Limited Slip Dffrntl

from

$491.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application. This kit fits applications with a 29 spline pinion.

Product Features:

Fits Toyota V6 rear
29 spline only
Included are KOYO bearings and races along with high quality seals and small parts.
Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , oil baffles and slingers , thread locker, marking compound with brush, and gasket.

from

$7.99

8″ standard Open pinion gear Thrust washer.

Product Features:

Pinion gear thrust washer
Fits Toyota 8″ with 4 cylinder engine

from

$16.99

Toyota 8″ & V6 pinion nut washer.

Product Features:

Pinion nut for Toyota 8″ and V6

from

$38.99

Product Features:

Side adjuster
Fits Toyota V6 and Landcruiser reverse rotation front

from

$10.99

Outer oil slinger for Toyota 7.5″, 8″, V6 & Landcruiser.

Product Features:

Outer oil slinger for Toyota 7.5″, 8″, V6 and Landcruiser

from

$52.99

Air line repair kit, ZIP locker.

Product Features:

Air line repair kit
Includes 20′ air line and two repair fittings

from

$1356.99

The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.

Product Features:

Fits Toyota V6 rear
Forged case and 8620 internals for added strength
Works with a variety of air delivery systems
Assembled in the USA

from

$78.99

Product Features:

Seal housing for Toyota 8″ and V6
Includes o-rings

from

$23.99

Toyota 29spl V6 and clamshell front, outer oil slinger.

Product Features:

Outer slinger
Fits Toyota 8″ clamshell front

from

$424.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features: