2004 Jeep Grand Cherokee Bodies and Fender Parts
More 2004 Jeep Grand Cherokee Bodies and Fender Parts
Find your specific 2004 Jeep Grand Cherokee original or aftermarket Bodies and Fender Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2004 Jeep Grand Cherokee Bodies and Fender Parts
WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.120058)
from
$146.99
The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.
Product Features:
See More
Product Features:
- Protects Your Vehicle Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle Wheels
- Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
- Provide Protection For Your Vehicle Most Vulnerable Rust Area
- Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
- Molded From A Proprietary Thermoplastic Resin
- No Drilling Required And Installs In Minutes
Dee Zee – 11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On (Part No.DZ1808)
from
$39.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.
Product Features:
See More
Product Features:
- Protect Your Vehicle And Trailer From Rocks And Messy Conditions
- Classic Diamond Style Design
- Protected By A BriteGard Powder Coat Finish
- Compliment Brite-Tread Running Boards
Dee Zee – Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material (Part No.DZ17939)
from
$28.49
Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.
Product Features:
See More
Product Features:
- Protect Your Vehicle And Trailer From Rocks And Messy Conditions
- Universal Fitting
- Easy No Drill Installation
- Perfect Compliment Nerf Bars
Omix – Push Pin Clip; Lower (Part No.11811.20)
from
$5.29
Push Pin Clip; Lower
Dorman – Rivet-Push In-Hole Diameter .250 In. (sold by each) (Part No.700-576)
from
$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Omix – Plug; Floor; 6.3mm H (Part No.12033.15)
from
$6.79
Plug; Floor; 6.3mm H
Crown Auto Jeep Replacmnt – Used On Floor Drain, Black, Metal/ Rubber (Part No.55360966AA)
from
$5.99
Crown Automotive offers the largest line of Body replacement parts for Dodge and Jeep(R). Our applications Comes with Fender, Hood, Windshield, Grille, Tailgate, Bumpers, Door and Window for all Dodge and Jeep(R) models.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Westin – Premier 4 Oval Nerf Step Bars (Part No.22-5055)
from
$275.99
Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.
Product Features:
See More
Product Features:
- Vehicle Specific Mounting Kit Required; Sold Separately
- 4 in. Oval Tube
- Injection Molded Polymer Step Pad
- Molded Oval End Caps
- Bolt-On Installation; No Drilling Required
- 3 Year Warranty
Westin – E-Series 3 Round Nerf Step Bars (Part No.23-2975)
from
$296.99
Westin(TM) E-Series Nerf Bars are made of 3in. diameter round tubing and are vehicle specific designs. Step design and mounting technique varies by application (mounting kit included). They feature recessed area mounted step pads unique to E-Series Nerf Bars feature the Westin(TM) brand name and are UV resistant.
Product Features:
See More
Product Features:
- Mount Kit Included
- 3 in. Round Step Bars
- Economical Step-Up Solution
- Vehicle Specific Applications
- Injection Molded Polymer Step Pad
- Recessed Step Area
- Bolt-On Installation; No Drilling Required
Rugged Ridge – Side Tube Step (Part No.81593.33)
from
$609.99
This pair of 3 inch round stainless steel tube steps from Rugged Ridge mount securely to your Jeep for solid footing. Each side step has durable no-slip step pads that are securely mounted to the tube with rust-proof fasteners for long life and durability
Product Features:
See More
Product Features:
- Stainless Steel
- 3 in. Round
- No-Slip Step Pad
- Limited 5 Year Warranty
Covercraft – Custom Hood Protector (Part No.45500-01)
from
$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!
Product Features:
See More
Product Features:
- Protects vehicle’s hood from bugs or rock chips
- Low profile, aerodynamic design
- Installs in less than 5 minutes, no tools required
- Custom fit exactly to your vehicle
- Leather grain vinyl
Le Bra – Front End Cover, Vinyl, Black (Part No.551456-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Le Bra – Front End Cover (Part No.55456-01)
from
$159.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!
Product Features:
See More
Product Features:
- Full front end coverage
- Custom fit exactly to your vehicle
- Installs easily with no drilling or tools
- Leather grain vinyl
- Protect against rock chips, bugs and road tar
- Soft inner layer
Dorman – Front Position Control Arm Bumper (Part No.905-211)
from
$31.99
This jounce bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Crown Auto Jeep Replacmnt – OE Replacement (Part No.52089343AB)
from
$34.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Foam Construction
- Meets Quality Standards
- Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
- Easy To Install
Crown Auto Jeep Replacmnt – Polyurethane, Single (Part No.52088352)
from
$17.29
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Foam Construction
- Meets Quality Standards
- Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
- Easy To Install
KAI – Fender Splash Shield (Part No.CH1251122)
from
$24.99
New Standard Replacement Passenger Side Fender Liner/Splash Shield
Product Features:
See More
Product Features:
- Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Driver Side Fender Liner, Made Of Plastic (Part No.CH1250122)
from
$25.99
New Standard Replacement Driver Side Fender Liner/Splash Shield
Product Features:
See More
Product Features:
- Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Splash Shield (Part No.CH1251101)
from
$12.99
New Standard Replacement Passenger Side Fender Liner/Splash Shield
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Splash Shield (Part No.CH1250101)
from
$12.99
New Standard Replacement Driver Side Fender Liner/Splash Shield
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Omix – Clip; Rocker Panel; (Part No.11811.60)
from
$3.29
Clip; Rocker Panel;
Westin – Sure-Grip Running Boards (Part No.27-6115)
from
$412.99
Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.
Product Features:
See More
Product Features:
- Vehicle Specific Mount Kit Required; Sold Separately
- Corrosion Resistant Extruded Aluminum Board
- Slip Resistant Textured Step Surface
- Injection Molded Polymer End Caps
- Rocker Panel Gap Strip Included For Finished Look
- Optional Light Kit Available PN[27-6000]
Westin – Sure-Grip Running Boards (Part No.27-6620)
from
$466.99
Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.
Product Features:
See More
Product Features:
- Vehicle Specific Mount Kit Required; Sold Separately
- Corrosion Resistant Extruded Aluminum Board
- Slip Resistant Textured Step Surface
- Injection Molded Polymer End Caps
- Rocker Panel Gap Strip Included For Finished Look
- Optional Light Kit Available PN[27-6000]
Westin – Running Board Mount Kit (Part No.27-1785)
from
$165.99
SG6 LED Running Boards are designed to be vehicle specific and require a mount kit (sold separately). Kit includes driver and passenger side e-coated steel mount brackets, complete with hardware and installation instruction sheet.
Product Features:
See More
Product Features:
- Black Powder Coat Finish
- E-Coated Steel
- 5 Year Warranty
Westin – Molded Running Boards (Part No.27-0000)
from
$442.99
Westin Molded Running Boards are straight board OE style designs, available in three universal lengths (72in, 79in, 93in). Universal running boards are made of an extruded aluminum base board, feature a 1-piece construction and provide step area grooves f
Product Features:
See More
Product Features:
- OE Style
- UV Resistant Black Molded Polymer
- Extruded Aluminum Base Board
- Cradle Mounted Boards
- Customized Mounting Brackets Sold Separately
- Adds Perfect Finishing Touch To Vehicle
- 5 Year Warranty
Westin – SG6 Running Boards (Part No.27-64715)
from
$426.99
Westin’s SG6 Running Boards feature textured slip resistant step pads enhancing footing in virtually all weather conditions. SG6 Running Boards also include a rocker panel gap strip to provide users with the appropriate Westin finished look. A polished aluminum finish with a protective anodized coating prevents oxidation increasing durability and extending product life. A vehicle specific mount kit is required and sold separately. The SG6 LED Light Kit is also available and sold separately. Choose Westin’s SG6 Running Boards for the perfect balance between safety, function and style!
Product Features:
See More
Product Features:
- Vehicle Specific Mount Kit Required; Sold Separately
- Stylish Modern Design
- 5 1/2 in. Step Surface Width
- Corrosion Resistant Extruded Aluminum Board
- Injection Molded End Caps
- Slip Resistant Textured Step Surface
- Rocker Panel Gap Strip Included For Finished Look
- Optional Light Kit For End Caps PN[27-60000]
Dee Zee – Cradle Mount, No Drilling Required, For Dee Zee Nxc Boards (Part No.DZ16241)
from
$204.99
Dee Zee NXc Steps (brackets) Get a step up into your vehicle while adding styling and protection. Custom fit brackets work with any of the three styles of NXc running board (sold separately). Heavy-duty steel braces are protected by our NRT powder coat. NRT (No Rust Technology) is a specially developed coating that increases corrosion protection. Brackets and bolts for one complete installation come bundled together. No drilling is required on these vehicle specific mounts
Product Features:
See More
Product Features:
- Required To Mount NXC Running Boards
- NRT(TM) Powder Coat Corrosion Protection
- Custom Fit Application
- Heavy duty Steel Braces Are Protected By Our NRT Powder Coat
- No Drill Installation
Dee Zee – Powder Coated, With Black Trim, Unlighted, Requires Running Board Mounting Kit (Part No.DZ16203)
from
$541.99
Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Stainless or Black
Product Features:
See More
Product Features:
- Lightweight Aluminum Powder Coated Frame
- Full Length Protective Accent Trim
- Slip Resistant Raised Rubber Grommets On The Step Area
- NRT(TM) Powder Coated Steel Braces
- No Drilling Required
Popular 2004 Jeep Grand Cherokee Bodies and Fender Parts Categories
2004 Jeep Grand Cherokee Bodies and Fender Parts
Maybe you’re in the middle of a full rebuild of that 2004 Jeep Grand Cherokee. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 22 different Bodies and Fender Parts in our inventory ranging from $3.29 to $661.99. That means you can find the exact parts or products you need to keep that 2004 Jeep Grand Cherokee running smoothly.
Bodies and Fender Parts are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Jeep Grand Cherokee. Crown Auto Jeep Replacmnt, Dee Zee, and Omix are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bodies and Fender Parts for your 2004 Jeep Grand Cherokee, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 2004 Jeep Grand Cherokee rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bodies and Fender Parts Brands To Make Your 2004 Jeep Grand Cherokee Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Jeep Grand Cherokee demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Grand Cherokee the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.
Popular Covercraft Bodies and Fender Parts
We carry Covercraft parts in our stock across Front End Covers categories, plus more. For a 2004 Jeep Grand Cherokee, our most popular Covercraft Bodies and Fender Parts include:
FAQs for 2004 Jeep Grand Cherokee Bodies and Fender Parts
What are the most purchased Bodies and Fender Parts for the 2004 Jeep Grand Cherokee?
Out of 22 Bodies and Fender Parts for the 2004 Jeep Grand Cherokee, the most popular in our inventory are:
from
$28.49
(1)
Multi-Fit, 11" X 18", Set Of 2, Contoured Rectangle, Composite Material
Splash Guard (Mud Flap)
