2004 Ford Mustang Valve Cover and Cylinder Heads

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

The Engine Cylinder Head Temperature Sensor provides an input to the engine control module concerning the engine operating temperature. Similar to the engine coolant temperature sensor input, the engine control module will make engine operating condition changes based on engine temperature.

The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

The Engine Cylinder Head Temperature Sensor provides an input to the engine control module concerning the engine operating temperature. Similar to the engine coolant temperature sensor input, the engine control module will make engine operating condition changes based on engine temperature.

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

The Edelbrock No: 5745 Sure Seat Valve Spring for Edelbrock No: 50459, 79459, 79539, 79559, 60439, 60459, 60479, 60559 & 77479 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

The Edelbrock No: 5823 replacement mechanical roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

“Edelbrock part No: 9656 Pushrods are designed for small-block Ford 351W V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise formed wedged ends for a high quality fit with the cup seats. A black oxide finish is added for corrosion resistance. Pushrod Specifications: – For hydraulic roller lifters – Outside Diameter: 5/16″” – Length: 7.625″””

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

“Edelbrock part No: 9632 Pushrods are designed for small-block Ford 289-302 V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise formed wedged ends for a high quality fit with the cup seats. A black oxide finish is added for corrosion resistance. Pushrod Specifications: – Outside Diameter: 5/16″” – Length: 6.800″””

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

The Encore Automotive Valve Cover is a critical component engineered to create a tight, reliable seal at the top of the engine€™s cylinder head, preventing oil leaks and protecting vital engine parts. Manufactured using premium materials, this valve cover is designed to replace cracked, warped, or worn-out covers and restore your engine€™s original performance and appearance. Encore Automotive partners with the world€™s leading automakers to deliver Genuine OE and high-quality aftermarket solutions €” because when it comes to fit, durability, and convenience, Encore has you covered.

“The Edelbrock No. 4277 Elite II Valve Covers are designed for Ford FE 1958-1976 applications. This new line of Elite II valve covers feature a design that is influenced by the original Elite Series originally released in 1985, but with a new modern take on this classic look. They’re made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Our tall profile valve covers are 2″” taller than stock, and clear most roller rockers and valvetrain components. Our low profile valve covers clear all air-conditioning, alternator brackets and aluminum rockers. Overall height is measured from gasket flange to top at the highest point.”

The Edelbrock No: 4463 Signature Series Valve Covers are designed for Ford 429/460 V8 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

Felpro CYLINDER HEAD GASKET SET, HS26543PT.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.