2004 Ford F750 Fuel and Emissions Systems

Essential 2004 Ford F750 Fuel and Emissions Systems

Carquest Premium – Remanufactured Diesel High Pressure Oil Pump (Part No.AM92043)

Remanufactured Diesel High Pressure Oil Pump

from

$725.99
CARQUEST premium remanufactured high-pressure oil pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes pump gasket
  • Includes new quick-disconnect fittings that ensure a leak-free installation
See More

Carquest Premium – Secondary Air Injection Pipe (Part No.EGC1281)

Secondary Air Injection Pipe

from

$49.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:
  • Lifecycle tested to meet or exceed OE specifications
  • Direct OE replacement
  • High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
  • Global coverage for import and/or domestic applications.
See More

Carquest Premium – Fuel/Water Separator Spin-on with Sensor Port (Part No.86408)

Fuel/Water Separator Spin-on with Sensor Port

from

$51.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Contains Sensor Port Thread: 1 1/4-10;Integral Post Seal
  • Includes Integral Post Seal. Sensor Port Thread: 1 1/4-10
  • CAUTION: Furnished O-Ring must be installed on post for seal.
See More

Dorman – HD Solutions – Manifold Absolute Pressure Sensor (Part No.904-7525)

Manifold Absolute Pressure Sensor

from

$71.99
This manifold absolute pressure sensor is designed to match the function of an original sensor on specified vehicles, and to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles
  • Ideal solution – engineered to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector (Part No.PTA1207)

Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector

from

$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Fuel Injector Sleeve (Part No.AC20132)

Fuel Injector Sleeve

from

$14.29
The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can lead to combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:
  • Original equipment fit, form and function
See More

Motorcraft – Fuel Injector O-Ring Kit (Part No.CM-4717)

Fuel Injector O-Ring Kit

from

$28.99
All Motorcraft Seal designs undergo rigorous lab and real world tests in order to provide original equipment performance and reliability. Motorcraft Seals are extensively tested for proper seating and sealing under both temperature and pressure extremes.

Product Features:
  • Why Buy:
  • The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
  • Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck.
  • Motorcraft and Ford Parts are manufactured from first-quality materials – chosen specifically for maximum performance and application suitability.
  • As with all Motorcraft and Ford Parts, any innovations or improvements developed since the manufacture of the vehicle are included in these aftermarket replacement parts, ensuring the most current technology and performance
See More

Carquest Premium – Remanufactured Exhaust Gas Recirculation (EGR) Valve (Part No.AC20212)

Remanufactured Exhaust Gas Recirculation (EGR) Valve

from

$149.99
An essential part of the emissions system, the EGR valve recirculates exhaust gases to be reburned which reduces combustion temperatures resulting in a reduction of oxides of nitrogen emissions. Failure of this component can result in check engine light and increased emissions. This cost-effective replacement EGR valve is remanufactured to meet or exceed OE performance specifications.

Product Features:
  • Original equipment fit, form and function
  • Remanufactured to meet or exceed OE performance specifications
  • Includes new O-rings made of premium high-temperature OE materials
  • Includes gasket to ensure proper sealing between EGR valve and intake manifold
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)

Fuel Injector Seal Kit

from

$8.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Dorman – HD Solutions – Intake Manifold Temp Sensor (Part No.904-7044)

Intake Manifold Temp Sensor

from

$39.49
Dorman offers a variety of some of today’s most popular Multi-Purpose Sensors for measuring several types of temperature in the vehicle. Our direct replacement Multi-Purpose Sensor is ideal for measuring coolant and auto transmission temperature. Each replacement restores proper vehicle operation and provides a longer service life. Plus, these direct fit Sensors are affordable and easy to install.

Product Features:
  • Direct replacement for a proper fit every time
  • Replacement prevents any further damage to vehicle engine
  • No special tools required during installation
  • Thoroughly tested to meet product standards and quality
See More

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVE1214)

Exhaust Gas Recirculation (EGR) Valve Gasket

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Injection Pressure Regulator (IPR) Valve (Part No.AC20082)

Injection Pressure Regulator (IPR) Valve

from

$232.99
Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:
  • Original equipment fit, form and function
  • Manufactured to precise OE performance specifications
See More

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack

from

$23.99
Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.
See More

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Keyed Alike Locking Fuel Cap

from

$11.99
None

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Injection Control Pressure (ICP) Sensor (Part No.AC20402)

Injection Control Pressure (ICP) Sensor

from

$166.99
A critical component in the fuel injection system, the ICP sensor supplies the powertrain control module with injection control pressure, which is used to control injection quantity. Failure can result in poor drivability and/or illumination of the engine malfunction indicator or check engine lamp. New precision sensor is designed to meet or exceed OE performance specifications.

Product Features:
  • Original equipment fit, form and function
  • Meets or exceeds OE performance specifications
  • Premium materials ensure trouble-free operation
See More

Carquest Premium – Injection Control Pressure (ICP) Sensor (Part No.AC20412)

Injection Control Pressure (ICP) Sensor

from

$124.99
A critical component in the fuel injection system, the ICP sensor supplies the powertrain control module with injection control pressure, which is used to control injection quantity. Failure can result in poor drivability and/or illumination of the engine malfunction indicator or check engine lamp. New precision sensor is designed to meet or exceed OE performance specifications.

Product Features:
  • Original equipment fit, form and function
  • Meets or exceeds OE performance specifications
  • Premium materials ensure trouble-free operation
See More

Dorman – Fuel Injection Pressure Regulator Seal Kit (Part No.904-415)

Fuel Injection Pressure Regulator Seal Kit

from

$34.49
This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
  • Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Fuel Injection Control Module Repair Kit – No Flash Required (Part No.904-229)

Fuel Injection Control Module Repair Kit - No Flash Required

from

$209.99
This fuel injector control module is designed to match the fit and function of the original module on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
  • Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
  • No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
  • Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future
See More

Dorman – Exhaust Gas Recirculation Cooler Kit – Not CARB Compliant (Part No.904-405)

Exhaust Gas Recirculation Cooler Kit - Not CARB Compliant

from

$343.99
This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:
  • Improved reliability – this replacement EGR cooler features a spiral tube design, reducing clogging experienced with the original manufacturer’s design
  • Superior durability – precision-engineered using welded stainless steel for long service life
  • Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
  • Hardware included – all necessary O-rings, gaskets, and application-specific hardware included
See More

Dorman – Exhaust Gas Recirculation Cooler Kit (Part No.904-262)

Exhaust Gas Recirculation Cooler Kit

from

$374.99
This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:
  • Improved reliability – this replacement EGR cooler features a spiral tube design, reducing clogging experienced with the original manufacturer’s design
  • Superior durability – precision-engineered using welded stainless steel for long service life
  • Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
  • Hardware included – all necessary O-rings, gaskets, and application-specific hardware included
See More

Carquest Premium – Fuel Injection Timing Sensor (Part No.HMA1009)

Fuel Injection Timing Sensor

from

$243.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Diesel Injection Control Pressure Sensor (Part No.HMA1005K)

Diesel Injection Control Pressure Sensor

from

$164.99
The Premium CarQuest® Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:
  • The Premium CarQuest® Vehicle Solutions line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
  • Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
  • Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
  • Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
  • All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.
See More

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD25052)

Remanufactured Diesel Fuel Injector

from

$208.99
CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes 100% replacement of plunger and barrel to improve longevity over competitive units
  • Includes all new premium quality O-rings and seals
  • Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
See More

Cardone – Fuel Injector (Part No.2J-209)

Fuel Injector

from

$416.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
  • Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
  • All components are renewed or replaced as necessary to ensure high quality and durability
  • When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Carquest Premium – REMAN FUEL INJECTOR (Part No.A211-2232)

REMAN FUEL INJECTOR

from

$18.79
REMAN FUEL INJECTOR

Dorman – Electric Vacuum Pump (Part No.904-214)

Electric Vacuum Pump

from

$131.99
This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.

Product Features:
  • Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions
  • Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

2004 Ford F750 Fuel and Emissions Systems

You count on your 2004 Ford F750 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 48 Fuel and Emissions Systems ranging in price from $10.49 to $1,347.99, you’re sure to find everything you need for your 2004 Ford F750.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 7 different brands like Dorman, Carquest Premium, and Carquest. 2004 Ford F750 Fuel and Emissions Systems start as low as $10.49!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 61 extensive product reviews on 2004 Ford F750 Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Diesel Fuel Injector O-ring Kit with 4.0 stars and Fuel Injector with 3.0 stars.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2004 Ford F750 below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 2004 Ford F750

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Ford F750 running right for years to come. In our inventory you’ll find brands like Dorman, Carquest Premium, Carquest, and even more.

Popular Fram Fuel and Emissions Systems

You’ll find popular Fram brand products across Fuel Pumps. All are waiting to get your 2004 Ford F750 back on the road. Some of the top-rated Fram products in these categories are:
Heavy Duty Air Filter
from $118.99
(2)
Heavy Duty Air Filter
Fuel and Water Separators

FAQs for 2004 Ford F750 Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 2004 Ford F750?

Out of 48 Fuel and Emissions Systems for the 2004 Ford F750, the most popular in our inventory are:
Fuel Injector
from $295.99
(1)
Fuel Injector
Fuel Injectors
Fuel Injector Seal Kit
from $14.29
This product is not rated
Fuel Injector Seal Kit
Fuel Injector Seal Kits
Injection Control Pressure (ICP) Sensor
from $124.99
This product is not rated
Injection Control Pressure (ICP) Sensor
Fuel Injection Pressure Sensors

What are the top-rated 2004 Ford F750 Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your 2004 Ford F750 based on customer reviews/ratings are:
Diesel Fuel Injector O-ring Kit
from $10.49
(2)
Diesel Fuel Injector O-ring Kit
“Great quality unbeatable price”
Fuel Injector
from $319.05
(2)
Fuel Injector
“Fixed my father’s 6.0 powerstroke miss fire problem. Came sealed with a new copper ring and a rubber tip cover.”
Injection Pressure Regulating Valve
from $478.99
(2)
Injection Pressure Regulating Valve
“I cannot really comment about its quality as I just bought and installed it. Only thing I can say is, it jiggles and it fits on my 03 Forester X. I m”