2004 Ford F-350 Super Duty Belts and Hoses

Essential 2004 Ford F-350 Super Duty Belts and Hoses

Dorman – Engine Coolant Hose Clip (Part No.800-807)

Engine Coolant Hose Clip

from

$31.99
This HVAC heater hose retainer clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this HVAC heater hose retainer clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Fuel Filler Neck Hose (Part No.573-075)

Fuel Filler Neck Hose

from

$59.99
Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:
  • Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles
  • Durable construction – made of fuel-resistant materials to reduce future failure potential
  • Regulatory compliant – built to meet emission and inspection standards
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Gates – Breather Hose (Part No.B20101064614GAT)

Breather Hose

from

$91.68
Breather Hose

Motorcraft – Motorcraft Accessory Belt Idler Pulley (Part No.G6020360514MTR)

Motorcraft Accessory Belt Idler Pulley

from

$59.75
Motorcraft Belt Tensioners are manufactured with premium quality in mind

Product Features:
  • Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
  • Always application specific – no one-size-fits-all solution
  • Feature a cast-aluminum spring case and arm to resist cracking and fatigue
  • Sealed-for-life bearing helps provide long service life
  • Meets Motorcraft 10-year/150,000-mile durability specifications
  • Designed to perform in harsh underhood environment
  • Easy to install
  • Recommended by Ford Motor Company
See More

Motorcraft – DRIVE BELT TENSIONER (Part No.BT-137)

DRIVE BELT TENSIONER

from

$161.99
DRIVE BELT TENSIONER

Gates – Micro-V« Serpentine Drive Belt (Part No.K060806)

Micro-V« Serpentine Drive Belt

from

$44.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 28.5" Long, 2" Diameter (Part No.E72255)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 28.5" Long, 2" Diameter

from

$38.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Modular Coolant Hose (Part No.23815)

Premium Modular Coolant Hose

from

$135.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Molded Heater Hose: EPDM, Direct Fit, 0.63" Inside Diameter (Part No.19218)

Molded Heater Hose: EPDM, Direct Fit, 0.63" Inside Diameter

from

$71.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:
  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation – the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dorman – Molded Heater Hose: Aluminum/Rubber (Part No.626-545)

Molded Heater Hose: Aluminum/Rubber

from

$81.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
See More

Dorman – Engine Oil Cooler Line (Part No.625-201)

Engine Oil Cooler Line

from

$181.99
This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:
  • Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
  • Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
  • Easy to install – no special tools required
  • Quality tested – rigorous quality control ensure this hose assembly conforms to product standards
See More

Dorman – Engine Oil Cooler Line (Part No.625-504)

Engine Oil Cooler Line

from

$32.99
This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:
  • Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
  • Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
  • Easy to install – no special tools required
  • Quality tested – rigorous quality control ensure this hose assembly conforms to product standards
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.75" Diameter (Part No.E72638)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.75" Diameter

from

$83.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Motorcraft – Motorcraft Radiator Hose (Part No.G2000368629MTR)

Motorcraft Radiator Hose

from

$169.05
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft® hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:
  • Pre-shaped hose allows easy installation
  • Ethylene-propylene diolefin monomer (EPDM) rubber-over-braid construction resists cracking, swelling and splitting
  • Recommended by Ford Motor Company
See More

Dorman – Engine Heater Hose Assembly (Part No.626-630)

Engine Heater Hose Assembly

from

$91.99
This replacement coolant overflow hose is engineered to match the fit and function of the original equipment overflow hose assembly. Manufactured from quality materials to withstand extreme temperature changes for a long service life.

Product Features:
  • Upgraded replacement – this engine coolant overflow hose upgrades the failure-prone plastic Y-connectors on the original part to metal for greater durability
  • Application specific – made to match fit and function of the original hose on certain Ford Super Duty trucks
  • Professionally tested – this part was leak-tested in extreme heats to ensure proper performance
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Dayco – Heater Hose (Part No.R30301841523DAY)

Heater Hose

from

$86.28
Heater Hose

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 90mm Dia., 37.5mm Width, 8 Grooves (Part No.89519)

Serpentine Idler/Tensioner Pulley; Steel, 90mm Dia., 37.5mm Width, 8 Grooves

from

$70.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 119mm Dia., 36mm Width, 8 Grooves (Part No.89839)

Serpentine Idler/Tensioner Pulley; Polymer, 119mm Dia., 36mm Width, 8 Grooves

from

$78.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
See More

Motorcraft – Multi-Rib (Serpentine) Belt (Part No.W1000445654MTR)

Multi-Rib (Serpentine) Belt

from

$120.80
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
  • Laminated die-cut edge design provides quiet, efficient operation
  • Stands up to grease, oil, dirt and high temperatures
  • Flexes easily around the smallest pulley
  • Helps preserve belt strength
  • Helps eliminate rough edges present on cut-cog designed belts
  • Provides quiet operation
See More

Motorcraft – Multi-Rib (Serpentine) Belt (Part No.W1000437245MTR)

Multi-Rib (Serpentine) Belt

from

$127.18
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
  • Laminated die-cut edge design provides quiet, efficient operation
  • Stands up to grease, oil, dirt and high temperatures
  • Flexes easily around the smallest pulley
  • Helps preserve belt strength
  • Helps eliminate rough edges present on cut-cog designed belts
  • Provides quiet operation
See More

Motorcraft – Motorcraft Radiator Hose (Part No.G2000535855MTR)

Motorcraft Radiator Hose

from

$191.08
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft® hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:
  • Pre-shaped hose allows easy installation
  • Ethylene-propylene diolefin monomer (EPDM) rubber-over-braid construction resists cracking, swelling and splitting
  • Recommended by Ford Motor Company
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.75" Diameter (Part No.E72256)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.75" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dorman – Engine Oil Cooler Hose Assembly (Part No.A6200201037DOR)

Engine Oil Cooler Hose Assembly

from

$106.69
Designed to resist corrosion and leakage, Dorman’s Engine Oil Cooler Hose Assembly is engineered for long-lasting performance. Ensure the smooth transfer of oil from the engine to the cooler, and protect your engine in the process.

Product Features:
  • Upgraded from steel and/or rubber construction to corrosion-resistant aluminum (where applicable)
  • Includes clips and gaskets (where applicable)
  • Direct replacement for trouble-free installation
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 75 mm Diameter (Part No.419-629)

Idler/Tensioner Pulley: Specific Fit, Steel, 75 mm Diameter

from

$18.29
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:
  • Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
  • Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth (Part No.89006)

Serpentine Idler/Tensioner Pulley; Direct Fit, 90 mm Diameter, 30 mm Smooth

from

$30.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Litens – Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys (Part No.LV999544E)

Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys

from

$142.99
This Litens Serpentine Belt Drive Component Kit fits 2005-2009 Ford F-250, F-350, F-450, E-150, E-250 w/4.6/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys (Part No.LV999544F)

Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys

from

$149.99
This Litens Serpentine Belt Drive Component Kit fits 2002-2005 For F-250, F-350, F-450, F-550 Super Duty w/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys (Part No.LV999544B)

Serpentine Belt Tensioner Kit: Includes Belt, Tensioner, and any applicable Idler Pulleys

from

$115.99
This Litens Serpentine Belt Drive Component Kit fits 2002-2010 Ford E-150, Excursion, F-150, F-250, F-350, F-450, F-550 Super Duty w/4.6/5.4/6.8L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

2004 Ford F-350 Super Duty Belts and Hoses

You count on your 2004 Ford F-350 Super Duty to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 108 Belts and Hoses ranging in price from $10.15 to $181.99, you’re sure to find everything you need for your 2004 Ford F-350 Super Duty.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 10 different brands like Dayco, Litens, and Driveworks. 2004 Ford F-350 Super Duty Belts and Hoses start as low as $10.15!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 12,859 extensive product reviews on 2004 Ford F-350 Super Duty Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Poly Rib Belt Serpentine Belt; 99.02 Long, 6 Rib Count with 4.4 stars and Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts with 4.7 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2004 Ford F-350 Super Duty below to get started!

Top-Rated Belts and Hoses Brands For Your 2004 Ford F-350 Super Duty

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Ford F-350 Super Duty running right for years to come. In our inventory you’ll find brands like Dayco, Litens, Driveworks, and even more.

Popular Litens Belts and Hoses

You’ll find popular Litens brand products across Belt Tensioners and Pulleys. All are waiting to get your 2004 Ford F-350 Super Duty back on the road. Some of the top-rated Litens products in these categories are:
Serpentine Belt Tensioner: 1 Piece
from $62.99
(10)
Serpentine Belt Tensioner: 1 Piece
Belt Tensioner Assemblies

Top-Rated Dayco Belts and Hoses


If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 2004 Ford F-350 Super Duty, and some of our most reviewed Dayco parts include:

FAQs for 2004 Ford F-350 Super Duty Belts and Hoses

What are the most purchased Belts and Hoses for the 2004 Ford F-350 Super Duty?

Out of 108 Belts and Hoses for the 2004 Ford F-350 Super Duty, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 99.02 Long, 6 Rib Count
from $43.99
(35)
Poly Rib Belt Serpentine Belt; 99.02 Long, 6 Rib Count
Serpentine Belts

What are the top-rated 2004 Ford F-350 Super Duty Belts and Hoses?

Top-rated Belts and Hoses for your 2004 Ford F-350 Super Duty based on customer reviews/ratings are:
Poly Rib Belt Serpentine Belt; 99.02 Long, 6 Rib Count
from $66.99
(81)
Poly Rib Belt Serpentine Belt; 99.02 Long, 6 Rib Count
“Gets the job done.”
Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts
from $61.99
(31)
Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts
“quiet, easy install, doesnt bounce/keeps belt tight”
Poly Rib Belt Serpentine Belt; 100 Long, 6 Rib Count
from $56.99
(20)
Poly Rib Belt Serpentine Belt; 100 Long, 6 Rib Count
“I will see”