2004 Ford Excursion Differentials

Essential 2004 Ford Excursion Differentials

aFe POWER – Differential Cover (Part No.46-70082)

Differential Cover

from

$381.99
aFe Powers new front-end differential cover brings performance engineering to the protection of your trucks front-end. This differential cover has a 3-1/2 quart lube capacity at the factory fluid level line, a magnetic drain plug and a magnetic fill plug to remove unwanted debris. Built-in external fins transfer heat from the fluid to the outside air for maximum cooling. aFe has also designed a large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling. This differential cover is constructed out of durable die-cast A380 aluminum with reinforced ribs and a wrinkle black powder-coating for maximum strength and style. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:
  • External Fins Transfer Heat To Atmosphere
  • Calibration Plug
  • Fill Plug w/Magnet At End Of Extended Stick
  • Magnetic Drain Plug
See More

Spicer – Differential Seal (Part No.J7040444357SPI)

Differential Seal

from

$74.54
Differential Seal

USA Standard Gear – Replacement Spider Gear Set For Dana 50, 30 Spline (Part No.39007)

Replacement Spider Gear Set For Dana 50, 30 Spline

from

$198.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 30 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Replacement Side Gear Thrust Washer For Spicer 50 (Part No.33438)

Replacement Side Gear Thrust Washer For Spicer 50

from

$7.99
Replacement side gear thrust washer for Spicer 50 .

Product Features:
  • Side gear thrust washer
  • Fits Dana Spicer 50
See More

National – Bearings (Part No.15245)

Bearings

from

$9.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Complete Shim Kit For Dana 50 (Part No.55027)

Replacement Complete Shim Kit For Dana 50

from

$67.99
Product Features:
  • Complete shim kit
  • Fits Dana Spicer 50
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Replacement Oil Baffle For Dana 50 (Part No.33005)

Replacement Oil Baffle For Dana 50

from

$28.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 50
See More

Yukon Gear – Replacement Cross Pin Shaft For Spicer 50, Standard Open (Part No.33440)

Replacement Cross Pin Shaft For Spicer 50, Standard Open

from

$41.99
Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 50
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With Fine Spline And A 1310 U/Joint Size (Part No.41017)

Replacement Yoke For Dana 30, 44, And 50 With Fine Spline And A 1310 U/Joint Size

from

$121.99
Yukon replacement yoke for Dana 30, 44, and 50 with fine spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 44
  • 26 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

Yukon Gear – Positraction Internals For Dana 50 Dura Grip Posi, 30 Spline (Part No.16169)

Positraction Internals For Dana 50 Dura Grip Posi, 30 Spline

from

$368.99
Yukon positraction internals for Dana 50 Dura Grip posi, 30 spline. This kit does not include clutches.

Product Features:
  • Spider gear kit
  • Fits Dana Spicer 50 with Dura Grip positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

Zip Locker Bulkhead Quick-Disconnect Fitting

from

$18.99
Product Features:
  • Bulkhead quit connect fitting
See More

Spartan – Drive Axle Assembly; Ford F-250/350 SD Lock-up (Part No.RAXP2043E)

Drive Axle Assembly; Ford F-250/350 SD Lock-up

from

$2282.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:
  • Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
  • Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
  • Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
See More

Motive Gear – Differential Gear Install Kit (Part No.F10.5IK)

Differential Gear Install Kit

from

$67.99
Product Features:
  • MINI INSTALL KIT – FORD 10.5″
See More

FAG US – SHAFT SEAL (Part No.SS2852)

SHAFT SEAL

from

$20.99
SHAFT SEAL

Dorman – Differential Clutch Kit (Part No.697-417)

Differential Clutch Kit

from

$283.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles.
  • Quality materials – all components are built for reliable longevity and performance.
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

National – Shaft Repair Sleeve (Part No.99225)

Shaft Repair Sleeve

from

$28.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Pro-King – Differential Pinion Nut (Part No.764A961)

Differential Pinion Nut

from

$5.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Crush Sleeve (Part No.33085)

Crush Sleeve

from

$9.99
Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:
  • Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
  • 0.480″ tall
See More

Yukon Gear – Carrier Shim Kit For Dana 50 (Part No.55071)

Carrier Shim Kit For Dana 50

from

$23.99
Product Features:
  • Carrier shim kit
  • Fits Dana Spicer 50
See More

Yukon Gear – Minor Install Kit For Dana 50 Straight Axle Differential (Part No.12025)

Minor Install Kit For Dana 50 Straight Axle Differential

from

$135.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits straight axle Dana Spicer 50
  • Included are a pinion seal, complete shim kit, marking compound and brush.
See More

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

Yukon Gear – Replacement Clutch Set For Dana 44 Powr Lok, Aggressive (Part No.16151)

Replacement Clutch Set For Dana 44 Powr Lok, Aggressive

from

$232.99
Product Features:
  • Clutch kit
  • Fits Dana Spicer 44 and Chrysler 8.75″ Powr Lok
  • Aggressive design
See More

Yukon Gear – Replacement Pinion Gear Thrust Washer For Spicer 50 (Part No.33439)

Replacement Pinion Gear Thrust Washer For Spicer 50

from

$11.99
Product Features:
  • Pinion gear thrust washer
  • Fits Dana Spicer 50
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1136R)

Differential Pinion Shim Kit

from

$17.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R9.75FRL)

Differential Bearing Kit - Koyo

from

$208.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • BEARING KIT FORD 9.75 ’99 1/2-ON
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R50RL)

Differential Bearing Kit - Koyo

from

$122.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • DANA 50 BRG KIT ’98-ON 3/4 AND EXCURSION
See More

2004 Ford Excursion Differentials

Maybe you’re in the middle of a full rebuild of that 2004 Ford Excursion. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 197 different Differentials in our inventory ranging from $2.99 to $2,984.99. That means you can find the exact parts or products you need to keep that 2004 Ford Excursion running smoothly.

Differentials are only as good as their brand. We stock 20 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Ford Excursion. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2004 Ford Excursion, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,624 reviews in this category, some of the top rated parts include Differential Ring And Pinion Set with 4.3 stars and Bearings with 4.5 stars.

So if you’re in the market for aftermarket Differentials to keep your 2004 Ford Excursion rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2004 Ford Excursion Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Ford Excursion demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Excursion the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 2004 Ford Excursion, our most popular Felpro Differentials include:
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $9.49
(26)
Differential Cover Gasket
Rear Differential Cover Gaskets

FAQs for 2004 Ford Excursion Differentials

What are the most purchased Differentials for the 2004 Ford Excursion?

Out of 197 Differentials for the 2004 Ford Excursion, the most popular in our inventory are:
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
from $19.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
Differential Oil

What are the top-rated 2004 Ford Excursion Differentials?

Top-rated Differentials for your 2004 Ford Excursion based on customer reviews/ratings are:
Differential Ring And Pinion Set
from $231.99
(10)
Differential Ring And Pinion Set
“Exactly matched OEM part. Good value.”
Bearings
from $9.99
(8)
Bearings
“Fit like a glove. Sealed up the diff like mighty putty on steroids”
Multi Purpose Seal
from $30.99
(4)
Multi Purpose Seal
“quality”