2004 Ford Escape Suspension Parts

Essential Suspension Parts for 2004 Ford Escapes

MOOG – Coil Spring Set (Part No.80656)

Coil Spring Set

from

$89.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63631)

Strut-Mate Strut Boot Kit

from

$37.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Rare Parts – Coil Spring Seat (Part No.RP47087)

Coil Spring Seat

from

$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces road noise
  • Reduces vibration
  • UV resistant
See More

Dorman – Suspension Trailing Arm Bushing (Part No.523-069)

Suspension Trailing Arm Bushing

from

$35.49
This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Shock Rust Repair Kit (Part No.924-358)

Shock Rust Repair Kit

from

$291.99
Shock tower corrosion compromises vehicle safety and performance, and could lead to a failed state safety inspection. This weld-in direct replacement patch panel restores the structural integrity of the body and shock mount for a permanent repair.

Product Features:
  • Direct replacement – this shock tower patch panel exactly matches the fit and appearance of the original shock absorber mount.
  • Permanent repair – this patch panel welds into place, completely replacing the rusted original panel for a permanent fix.
  • Quality materials – this stamped steel shock mount repair panel is produced with a corrosion-resistant E-coat for a reliable repair
  • Guaranteed fit – this repair panel has been vehicle try-on tested to confirm accurate fit and ease of installation
See More

MOOG – Strut Bellows (Part No.K90464)

Strut Bellows

from

$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Engineered to meet or exceed OE requirements
  • Incorporates proven design and engineering features
See More

MOOG – Control Arm Bushing (Part No.K8836)

Control Arm Bushing

from

$17.79
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Suncore – Complete Strut Assem (Part No.55S11621)

Complete Strut Assem

from

$114.99
Complete Strut Assem

MOOG – Coil Spring Set (Part No.80657)

Coil Spring Set

from

$109.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

from

$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
  • Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
See More

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Extended Protection Automatic Transmission Fluid, 1 Quart

from

$14.99
Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.

Product Features:
  • The ultimate protection for your automatic transmission
  • 45% stronger against breakdown
  • Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
  • Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer
See More

Suncore – Shock Kit (Part No.2-12S252010-001)

Shock Kit

from

$69.99
Shock Kit

Suncore – Shock Kit (Part No.2-12S252040-001)

Shock Kit

from

$69.99
Shock Kit

KYB – STRUT MOUNT (Part No.L3030175258KYB)

STRUT MOUNT

from

$54.84
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The highest quality replacement strut mount available
  • Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
  • Superior rubber reduces noise, vibration and harshness
  • Mount bearings provide smoother steering and help retain front end alignment
  • Matched grade studs and nuts
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.L3033570119MNR)

Strut-Mate Strut Mounting Kit

from

$42.98
Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:
  • Strut Mount
  • Bearing
  • Upper Spring Isolator
  • Lower Spring Isolator
  • Upper Spring Seat
See More

Motorcraft – OE Shock Absorber (Part No.L4000365020MTR)

OE Shock Absorber

from

$115.37
By helping to reduce wheel bounce and providing consistent control, the wide range of Motorcraft shock absorbers and strut assemblies helps ensure a smooth ride for your customers under ever-changing loads, road conditions and driving situations.

Product Features:
  • Available for all Ford Motor Company vehicle applications
  • Reduce wheel bounce
  • Engineered to bring back a smooth ride
  • Provide consistent control for improved safety
See More

Monroe – OESpectrum Monotube Shock Absorber (Part No.39111)

OESpectrum Monotube Shock Absorber

from

$129.99
Providing an exceptional level of handling precision and control, Monroe® OESpectrum® Monotube shocks are designed for vehicles originally equipped with monotube shock absorbers. OESpectrum Monotube shocks filter out noise, vibration and harshness.

Product Features:
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned to each vehicle, adjusts to road extremes to provide a smooth ride while free floating dividing piston separates fluid from high-pressure gas charging for reduced shock fade and aeration
  • IMPROVES PERFORMANCE — High pressure nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration and tight damping response provides vehicle control
  • CONSISTENT RIDE — High-temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • MAINTAINS STABILITY — Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and high-strength pressure tube for better control, increased durability and longer service life
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • Premium – Limited Lifetime Warranty
  • For Commercial Usage Refer to Product Warranty
See More

TRW – Control Arm (Part No.L2000235780TRW)

Control Arm

from

$149.02
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:

Product Features:
  • Aluminium forged Control Arms
  • Aluminium cast Control Arms – low weight/high performance
  • Steel forged Control Arms
  • Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
  • Temperature resistant
  • Low-torque/high comfort solution
  • Ball stud diameters ranging from 25 to 42mm
  • Integral and non-integral designs Built in Bushes:
  • Rubber Bushes
  • Rubber and Metal Bushes
  • Hydraulic Bushes
See More

Whiteline – Control Arm Upper Arm (Part No.WA402)

Control Arm Upper Arm

from

$87.99
Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings and premium quality ball joints (if applicable).

Product Features:
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Dorman – Vehicle Speed Sensor Pigtail (Part No.645-213)

Vehicle Speed Sensor Pigtail

from

$14.79
Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:
  • Professional appearance – this electrical pigtail is designed for a clean, professional look when installed.
  • Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
  • Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
  • Versatile component – this connector can be used in a variety of repairs and custom installations
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.904938)

Strut-Mate Strut Mounting Kit

from

$43.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.908961)

Strut-Mate Strut Mounting Kit

from

$84.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

Monroe – OESpectrum Strut (Part No.72619)

OESpectrum Strut

from

$138.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Suncore – Complete Strut Assem (Part No.55S11622)

Complete Strut Assem

from

$114.99
Complete Strut Assem

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172750)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$189.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
See More

Monroe – OESpectrum Strut (Part No.71594)

OESpectrum Strut

from

$107.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920317)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$119.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172748)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$279.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
See More

Upgrade your 2004 Ford Escape with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2004 Ford Escape, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Suspension Parts are key to keeping your Escape functioning at its best. At Advance Auto Parts, we offer a wide selection of 51 Suspension Parts for the 2004 Ford Escape, designed to meet your needs without breaking the bank. From Coil and Leaf Spring replacements to Air Suspension and Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2004 Ford Escape at great prices. Our Suspension Parts inventory for this model ranges from just $6.29 to $313.99, with an average price of $92.25. Our 51 Suspension Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 2004 Ford Escape without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Ford Escape, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline Monroe, and more. Valvoline Suspension Parts start at just $14.99 and boast an impressive 5 stars average rating from customers. With 3,402 customer reviews and counting, our 2004 Ford Escape Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Ford Escape is always ready to roll. We’re committed to providing you with everything you need to keep your Escape in top shape, all in one place. Start shopping confidently below for your 2004 Ford Escape!

Best-Selling Coil and Leaf Springs for 2004 Ford Escapes

Enhance the driving experience in your Ford with 11 quality Coil and Leaf Spring components, starting at $27.99.

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.171594)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$222.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.181594)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$173.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
  • EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
  • CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
  • COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.181593)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$173.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
  • EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
  • CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
  • COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-815010)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$177.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-815009)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$177.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

MOOG – Coil Spring Set (Part No.80657)

Coil Spring Set

from

$109.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

MOOG – Coil Spring Set (Part No.80656)

Coil Spring Set

from

$89.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Suncore – Complete Strut Assem (Part No.55S11621)

Complete Strut Assem

from

$114.99
Complete Strut Assem

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.815010)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$182.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

MOOG – Coil Spring Set (Part No.80658)

Coil Spring Set

from

$151.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Rare Parts – Coil Spring Seat (Part No.RP47087)

Coil Spring Seat

from

$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces road noise
  • Reduces vibration
  • UV resistant
See More

Most Popular 2004 Ford Escape Air Suspension and Kits

Customize your Ford with 7 Air Suspension and Kits products like Suspension Self-Leveling Unit Fluids, Suspension Strut Mounting Kits, and Shock Absorber Kits, all priced under $69.99.

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

from

$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
  • Developed with anti-wear technology to help improve transmission durability
  • Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
  • Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
See More

Dorman – Vehicle Speed Sensor Pigtail (Part No.645-213)

Vehicle Speed Sensor Pigtail

from

$14.79
Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:
  • Professional appearance – this electrical pigtail is designed for a clean, professional look when installed.
  • Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
  • Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
  • Versatile component – this connector can be used in a variety of repairs and custom installations
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.904938)

Strut-Mate Strut Mounting Kit

from

$43.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

Suncore – Shock Kit (Part No.2-12S252010-001)

Shock Kit

from

$69.99
Shock Kit

Autopart International Inc – Strut Mount (Part No.L3030652236API)

Strut Mount

from

$39.95
Strut Mount

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Extended Protection Automatic Transmission Fluid, 1 Quart

from

$14.99
Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.

Product Features:
  • The ultimate protection for your automatic transmission
  • 45% stronger against breakdown
  • Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
  • Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer
See More

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

Max Performance Synthetic Power Steering Fluid

from

$6.29
Max Performance Synthetic Power Steering Fluid

Top Picks for 2004 Ford Escape Control Arms

Upgrade Ford Escapes with top-quality Control Arms parts, including 16 OEM and aftermarket selections for your 2004 model.

TRW – Control Arm (Part No.L2000235780TRW)

Control Arm

from

$149.02
TRW control arms can help improve fuel economy, emissions, energy savings, driving comfort and most important, safety. TRW provides hardware kits as standard on all ball joints, installation instructions and catalog information in all formats. Upper and lower Control Arms designed as:

Product Features:
  • Aluminium forged Control Arms
  • Aluminium cast Control Arms – low weight/high performance
  • Steel forged Control Arms
  • Steel stamped Control Arms Ball Joints include the latest state-of-the-art high performance designs:
  • Temperature resistant
  • Low-torque/high comfort solution
  • Ball stud diameters ranging from 25 to 42mm
  • Integral and non-integral designs Built in Bushes:
  • Rubber Bushes
  • Rubber and Metal Bushes
  • Hydraulic Bushes
See More

MOOG – Control Arm Bushing (Part No.K200795)

Control Arm Bushing

from

$47.99
Backed by superior materials and rigorous testing, MOOG Problem Solver vertical control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • SMOOTH ROTATION — Exclusive ball and socket design allows for smooth rotational movement
  • EASY TO INSTALL — Design saves time during installation by aligning the bushing sleeve to insert the bolt
  • LOW MAINTENANCE — Bushing assembly is permanently lubricated and sealed with premium MOOG boot helps prevent contamination
  • PREMIUM MATERIALS — Made from high-quality polymer and steel compounds for durability and ride performance
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Easier to install and lasts longer than typical OE designs
See More

MOOG – Control Arm Bushing (Part No.K8836)

Control Arm Bushing

from

$17.79
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

MOOG – Control Arm Bushing (Part No.K200360)

Control Arm Bushing

from

$22.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Dorman – Control Arm (Part No.L2000341962DOR)

Control Arm

from

$166.44
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:
  • Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
  • Direct replacement for a trouble-free installation
  • Steel, iron or aluminum construction ensures durability
  • Powder-coated or painted for long-lasting rust and corrosion resistance
See More

Autopart International Inc – Control Arm (Part No.L20002052621API)

Control Arm

from

$110.71
Control Arm

Rare Parts – Control Arm Bush (Part No.RP22369)

Control Arm Bush

from

$82.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

TRW – Control Arm Bushing (Part No.L2030164758TRW)

Control Arm Bushing

from

$35.45
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
  • Dynamic testing of complete units to ensure leak free performance
  • Extensive on-road testing at TRW tracks around the world
See More

Rare Parts – Control Arm Bush (Part No.RP19972)

Control Arm Bush

from

$32.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Rare Parts – Control Arm Bush (Part No.RP19973)

Control Arm Bush

from

$31.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

MOOG – Control Arm Bushing (Part No.K200359)

Control Arm Bushing

from

$28.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Rare Parts – Control Arm Bush (Part No.RP18942)

Control Arm Bush

from

$25.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Dorman – Suspension Control Arm Bushing (Part No.533-792)

Suspension Control Arm Bushing

from

$22.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm Bushing (Part No.533-800)

Suspension Control Arm Bushing

from

$18.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm Bushing (Part No.533-801)

Suspension Control Arm Bushing

from

$16.99
This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

FEQ – Wheel Bearing (Part No.K8000127697FEQ)

Wheel Bearing

from

$14.65
FEQ wheel bearings are engineered and manufactured to the highest quality standards.

Product Features:
  • Original Equipment Quality
  • Premium modified bearing steel
See More

In-Demand Shocks and Struts for 2004 Ford Escapes

Select from 15 premium Shocks and Struts parts for your 2004 Ford Escape, with prices ranging from $31.49 to $313.99.

Monroe – OESpectrum Light Truck Shock Absorber (Part No.37217)

OESpectrum Light Truck Shock Absorber

from

$91.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • 1-3/8 inch (34.9 mm) bore (On most applications)
  • 5/8-inch (15.9 mm) diameter piston rod (On most applications)
See More

Monroe – OESpectrum Strut (Part No.71594)

OESpectrum Strut

from

$107.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.171593)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$222.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
See More

Monroe – Gas-Matic LT Shock Absorber (Part No.59413)

Gas-Matic LT Shock Absorber

from

$45.49
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:
  • Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – OESpectrum Strut (Part No.71593)

OESpectrum Strut

from

$119.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63631)

Strut-Mate Strut Boot Kit

from

$37.49
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

MOOG – Strut Bellows (Part No.K90464)

Strut Bellows

from

$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Engineered to meet or exceed OE requirements
  • Incorporates proven design and engineering features
See More

Suncore – Quick Strut Kit (Part No.2-55S11621-001)

Quick Strut Kit

from

$219.99
Quick Strut Kit

Dorman – Shock Rust Repair Kit (Part No.924-358)

Shock Rust Repair Kit

from

$291.99
Shock tower corrosion compromises vehicle safety and performance, and could lead to a failed state safety inspection. This weld-in direct replacement patch panel restores the structural integrity of the body and shock mount for a permanent repair.

Product Features:
  • Direct replacement – this shock tower patch panel exactly matches the fit and appearance of the original shock absorber mount.
  • Permanent repair – this patch panel welds into place, completely replacing the rusted original panel for a permanent fix.
  • Quality materials – this stamped steel shock mount repair panel is produced with a corrosion-resistant E-coat for a reliable repair
  • Guaranteed fit – this repair panel has been vehicle try-on tested to confirm accurate fit and ease of installation
See More

Suncore – Complete Strut Assem (Part No.55S11622)

Complete Strut Assem

from

$114.99
Complete Strut Assem

Monroe – Gas-Matic Strut (Part No.81594)

Gas-Matic Strut

from

$96.99
Monroe® Gas-Matic passenger car struts are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Dorman – Shock Tower Patch Panel (Part No.999-987)

Shock Tower Patch Panel

from

$313.99
Shock tower corrosion compromises vehicle safety and performance, and could lead to a failed state safety inspection. This weld-in direct replacement patch panel restores the structural integrity of the body and shock mount for a permanent repair..

Product Features:
  • Direct replacement – this shock tower patch panel exactly matches the fit and appearance of the original shock absorber mount.
  • Permanent repair – this patch panel welds into place, completely replacing the rusted original panel for a permanent fix
  • Quality materials – this stamped steel shock mount repair panel is produced with a corrosion-resistant E-coat for a reliable repair
  • Guaranteed fit – this repair panel has been vehicle try-on tested to confirm accurate fit and ease of installation
See More

PRT – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.815009)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$182.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Nuts and Bolt: SAE Standard Grade
  • Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
  • Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
  • Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
  • Outer Tube: Long-lasting corrosion and rust protection.
  • Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
  • Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
  • Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
  • Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
  • Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
See More

KYB – STRUT MOUNT (Part No.L3030175258KYB)

STRUT MOUNT

from

$54.84
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The highest quality replacement strut mount available
  • Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
  • Superior rubber reduces noise, vibration and harshness
  • Mount bearings provide smoother steering and help retain front end alignment
  • Matched grade studs and nuts
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.L3033570119MNR)

Strut-Mate Strut Mounting Kit

from

$42.98
Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:
  • Strut Mount
  • Bearing
  • Upper Spring Isolator
  • Lower Spring Isolator
  • Upper Spring Seat
See More

Most Sold 2004 Ford Escape Trailing Arms

Explore our best-selling Ford parts for the 2004 Escape among 2 OEM and aftermarket options starting from $25.99.

Dorman – Suspension Trailing Arm Bushing (Part No.523-069)

Suspension Trailing Arm Bushing

from

$35.49
This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Trailing Arm Bushing (Part No.K201678)

Trailing Arm Bushing

from

$25.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Returns like-new steering
  • Long-lasting performance
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Top-Rated Suspension Parts Brands For Your 2004 Ford Escape

Shop for the best-rated brands offering Suspension Parts and other products for your 2004 Ford Escapes. Below you’ll find some of our best rated Suspension Parts from Valvoline and Monroe, and more. Suspension Parts from these brands that fit a 2004 Escape start at just $14.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2004 Ford Escape Suspension Parts

When it comes to maintaining or upgrading your 2004 Ford Escape, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 2004 Ford Escape. With over 2 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $25.74. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Extended Protection Automatic Transmission Fluid, 1 Quart
from
$14.99
This product is not rated

Extended Protection Automatic Transmission Fluid, 1 Quart

“”

Popular Monroe 2004 Ford Escape Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 2004 Ford Escape owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 2004 Escape, Advance Auto Parts carries a full inventory of 12 Monroe Suspension Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Monroe Suspension Parts range from $37.49 to $222.99, plus, with more than 117 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

OESpectrum Light Truck Shock Absorber
from
$91.99

(26)

OESpectrum Light Truck Shock Absorber

“It’s my suv perfect”

Strut-Mate Strut Mounting Kit
from
$42.98
This product is not rated

Strut-Mate Strut Mounting Kit

“”

Gas-Matic Strut
from
$96.99
This product is not rated

Gas-Matic Strut

“”

FAQs for 2004 Ford Escape Suspension Parts

Which Suspension Parts are best-sellers for 2004 Ford Escapes?

Out of 51 Suspension Parts that fit 2004 Ford Escapes, the following parts are the top sellers:

What’s the price range for 2004 Ford Escape Suspension Parts?

Suspension Part prices for the 2004 Ford Escape start at $6.29 and go up to $313.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2004 Ford Escape?

The average price for Suspension Parts for the 2004 Ford Escape is $92.25. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Ford Escape model years?

Yes, we currently carry Suspension Parts for 22 model years of Ford Escapes between 2001 and 2023. Suspension Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Suspension Parts for my 2004 Ford Escape?

The cheapest 2004 Ford Escape Suspension Parts we carry in stock are:

What are the top-rated Suspension Parts that fit the 2004 Ford Escape?

Out of 3,402 reviews by customers, our 2004 Ford Escape Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2004 Ford Escape and their top-rated products:

Can I get help with 2004 Ford Escape Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Suspension Parts and more.

What is your return policy for Ford Escape Suspension Parts?

Advance Auto Parts keeps returns simple. For new Ford Escape Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.