2004 Ford E-250 Econoline Differentials

Essential 2004 Ford E-250 Econoline Differentials

Yukon Gear – Replacement Standard Open Carrier Case For Dana 60, 4.56 & Up (Part No.20046)

Replacement Standard Open Carrier Case For Dana 60, 4.56 & Up

from

$389.99
Yukon replacement standard open carrier case for Dana 60, 4.56 & up (incl ABS) 2-7/16″ tall.

Product Features:
  • Standard open carrier case
  • Does not include spider gears
  • Fits Dana Spicer 60
  • 4.56 and up ratio only
  • ABS and non-ABS compatible
See More

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

from

$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:
  • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
See More

Yukon Gear – Replacement Trail Repair Kit For Dana 60 With 1310 Size U/Joint And U-Bolts (Part No.32282)

Replacement Trail Repair Kit For Dana 60 With 1310 Size U/Joint And U-Bolts

from

$251.99
Yukon replacement trail repair kit for Dana 60 with 1310 size U/joint and u-bolts. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:
  • Fits Dana Spicer 60 and 70
  • 1310 u-joint size
  • Kit includes yoke, U-joint, pinion seal, pinion nut and washer, U-bolts and threadlocker
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Richmond Gear – RngPnn (Part No.79-0013-1)

RngPnn

from

$538.99
RngPnn

Yukon Gear – 1541H Alloy, 8 Lug, Left Hand Replacement Rear Axle For ’95-’10 Dana 60, E150/ E250/ E350 (Part No.21157)

1541H Alloy, 8 Lug, Left Hand Replacement Rear Axle For '95-'10 Dana 60, E150/ E250/ E350

from

$329.99
Yukon 1541H alloy, 8 lug, left hand replacement rear axle for ’95-’10 Semi Float Dana 60, Ford E Series Vans with a length of 34.13″ inches and 35 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a semi float axle.

Product Features:
  • 35 spline
  • 8 lug
  • 34.13″ long
  • Fits Dana Spicer 60 in 1995-2002 Ford E250
  • Left hand side
  • Semi-float axle
See More

Yukon Gear – Bearing Race Driver (Part No.56020)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M802011 race
  • All steel construction
See More

Yukon Gear – Replacement Crush Sleeve For Dana 60 (Part No.33089)

Replacement Crush Sleeve For Dana 60

from

$8.99
Replacement crush sleeve for Dana 60, APROX 0.660″ long.

Product Features:
  • Crush sleeve for Dana Spicer 60
  • 0.660″ tall
See More

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$12.79
Product Features:
  • High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
  • Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
  • Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
  • Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings (Part No.34040)

Seal Housing For Ford 10.25" & 10.5", Zip Locker, With O-Rings

from

$78.99
Seal housing for Ford 10.25″ & 10.5″, Zip locker, with o-rings.

Product Features:
  • Seal housing for Ford 10.25″ and 10.5″
  • Includes o-rings
See More

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement

from

$3.99
Product Features:
  • Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
See More

Yukon Gear – Carrier Installation Kit For Dana 60 Differential (Part No.57005)

Carrier Installation Kit For Dana 60 Differential

from

$194.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 60
  • Includes carrier bearings and races and carrier shim kit
See More

USA Standard Gear – Standard Spider Gear Set For Ford 9", 31 Spline, 4-Pinion Design (Part No.39018)

Standard Spider Gear Set For Ford 9", 31 Spline, 4-Pinion Design

from

$249.99
Product Features:
  • Spider gear kit
  • Fits Ford 9″ 31 spline open differential
  • Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
See More

Yukon Gear – Trac Loc For Ford 9" Wtih 31 Spline Axles – Street Design (Part No.26010)

Trac Loc For Ford 9" Wtih 31 Spline Axles - Street Design

from

$789.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Trac Loc uses a nodular case, billet side hat, and forged internals for higher strength than stock Trac-Locs. The units use composite clutches for high performance and long life. All units are Rebuildable. Yukon offers a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″ with 31 spline axles
  • Trac Loc positraction
  • Clutch style positraction
  • Street design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Ford 10.25" & 10.5" Cover Gasket (Part No.23008)

Ford 10.25" & 10.5" Cover Gasket

from

$13.99
10.25″ & 10.5″ cover gasket.

Product Features:
  • Cover gasket
  • Fits Ford 10.25″ and 10.5″
See More

Yukon Gear – Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33298)

Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford

from

$6.99
Side gear thrust washer (0.750″ shaft) for 8.8″ Ford.

Product Features:
  • Side gear thrust washer for Ford 8.8″
  • 0.750″ diameter cross pin shaft applications only
See More

Yukon Gear – Pinion Depth Shims For Ford 9.75" (Part No.55007)

Pinion Depth Shims For Ford 9.75"

from

$32.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Pinion depth shims for Ford 9.75″
See More

Dorman – Differential Clutch Kit (Part No.697-780)

Differential Clutch Kit

from

$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
  • Quality materials – all components are built for reliable longevity and performance
  • Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)

Tapered Roller Bearing

from

$10.29
Product Features:
  • Brand may vary by location
See More

Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)

Tapered Cup Wheel Bearing Assembly

from

$8.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – 8" & 9" Ford 4-Tab Clutch Kit With 9 Pieces (Part No.16029)

8" & 9" Ford 4-Tab Clutch Kit With 9 Pieces

from

$187.99
8″ & 9″ Ford 4-Tab clutch kit with 9 pieces (late TracLoc).

Product Features:
  • Clutch kit
  • Fits Ford 8″ and 9″ Trac Loc positraction
See More

Yukon Gear – Steel Cover For Dana 60 Standard Rotation (Part No.32321)

Steel Cover For Dana 60 Standard Rotation

from

$114.99
Product Features:
  • Fits standard rotation Dana Spicer 60
  • Steel
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Dana 60 & Dana 70 Power Lok Case Bolt

from

$7.99
Dana 60 & Dana 70 Power Lok case bolt.

Product Features:
  • Power Lok case bolt for Dana Spicer 60 and 70
  • 7/16 x 14 thread
  • 3.5″ long
  • 9/16″ hex head
See More

Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)

Trac Loc Clutch Guide For 9" Ford

from

$4.99
Trac Loc clutch guide for 9″ Ford.

Product Features:
  • Clutch guide
  • Fits Ford 8″ and 9″
See More

Yukon Gear – Zip Locker For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.34022)

Zip Locker For Dana 60 With 35 Spline Axles, 4.10 & Down

from

$1487.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years. This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 35 spline axles
  • 4.10 and down ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$373.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Composite clutches
See More

Yukon Gear – Dropout Housing Stud For Ford 8" & 9" (Part No.32338)

Dropout Housing Stud For Ford 8" & 9"

from

$7.99
Product Features:
  • Housing stud
  • Fits Ford 8″ and 9″
See More

2004 Ford E-250 Econoline Differentials

Maybe you’re in the middle of a full rebuild of that 2004 Ford E-250 Econoline. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 194 different Differentials in our inventory ranging from $2.99 to $1,487.99. That means you can find the exact parts or products you need to keep that 2004 Ford E-250 Econoline running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Ford E-250 Econoline. Valvoline, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2004 Ford E-250 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,192 reviews in this category, some of the top rated parts include Cylindrical Bearing with 3.0 stars and Differential Ring And Pinion with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 2004 Ford E-250 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2004 Ford E-250 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Ford E-250 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your E-250 Econoline the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 2004 Ford E-250 Econoline Differentials

What are the most purchased Differentials for the 2004 Ford E-250 Econoline?

Out of 194 Differentials for the 2004 Ford E-250 Econoline, the most popular in our inventory are:
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Bearings
from $6.99
(6)
Bearings
Differential Bearings
Bearings
from $9.99
(8)
Bearings
Front Differential Pinion Bearings

What are the top-rated 2004 Ford E-250 Econoline Differentials?

Top-rated Differentials for your 2004 Ford E-250 Econoline based on customer reviews/ratings are:
Cylindrical Bearing
from $31.99
(4)
Cylindrical Bearing
“excellent product”
Differential Ring And Pinion
from $369.99
(1)
Differential Ring And Pinion
“Be patient after install….may make bearing type noise the first few starts….after that smooth sailing!”
Ford 10.25" & 10.5" Cover Gasket
from $13.99
(1)
Ford 10.25" & 10.5" Cover Gasket
“how the hell am i supposed to know what size and shape my differential cover gasket is?dana or ford.why isn’t there a vin entry somewhere on the webpa”