2004 Dodge Ram 3500 Bodies and Fender Parts

Essential 2004 Dodge Ram 3500 Bodies and Fender Parts

KAI – Fender Splash Shield (Part No.CH1251124)

Fender Splash Shield

from

$25.99
New Standard Replacement Passenger Side Fender Liner/Splash Shield, Ram 3500 Excludes Mega Cab

Product Features:
  • Ram 3500 Excludes Mega Cab, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Covercraft – Custom Hood Protector (Part No.45231-01)

Custom Hood Protector

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:
  • Protects vehicle’s hood from bugs or rock chips
  • Low profile, aerodynamic design
  • Installs in less than 5 minutes, no tools required
  • Custom fit exactly to your vehicle
  • Leather grain vinyl
See More

Lund – Rivet Style Fender Flare Set (Part No.RX203TB)

Rivet Style Fender Flare Set

from

$257.99
LUND’s RX-Rivet Style fender flares are the perfect addition to lifted trucks, giving them a bold, unmistakable appearance. Designed for larger tires and wheels, LUND’s RX-Rivet Style flares will transform your Chevy Silverado, Toyota Tundra, GMS Sierra, Dodge Ram or Ford truck into an off-road, gutsy-appearing ride. This rivet style fender flare provides extra coverage on trucks with larger wheel and tire packages. Update your vehicle with an awesome, wide-body look while shielding it from road debris. The extra height of the flares is also a great quick fix for covering rust and minor damages on the fender. This distinctive fender flare, available in four-piece sets, is designed to not only add a rugged, off-road look, but also protect the sides of your vehicle from road debris and harsh outdoor elements. LUND’s RX-Rivet Style fender flares are made with ABS thermoplastic material to allow for maximum durability – providing a dense, hard and scratch-resistant surface, flexible enough to bend instead of shattering. This flare is built to last and is backed by a Limited Lifetime Warranty. Straight from the die, the flare has a satiny finish (standard) that looks great, but is easily prepped and painted for any sort of automotive paint. The flare is also available in a textured finish. Maintenance is easy! You can use any detergent you use to wash your vehicle to clean the flares as well.

Product Features:
  • Bold And Aggressive Design
  • Gives The Tundra Improved Protection Against Rocks And Debris
  • Additional Coverage For Larger Tire And Wheel Packages
  • Available In Two Finishes
  • Tough And Durable Tri-Flex ABS Thermoplastic
  • UV-Resistant To Protect Against Fading
  • Polished Stainless Steel Hardware Included
  • Easy No Drill Installation Utilizing Factory Attachment Locations
  • Limited Lifetime Warranty
  • Made In USA
See More

Energy Suspension – BodyMntBshKt (Part No.5.4115G)

BodyMntBshKt

from

$424.99
BodyMntBshKt

Dorman – Spare Tire Hoist Assembly (Part No.924-541)

Spare Tire Hoist Assembly

from

$135.99
Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:
  • Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models.
  • Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement.
  • Functionality ensured – hoist appearance may vary slightly from original part but functions the same
  • Corrosion resistant – specially coated to prevent future rust and corrosion
See More

KAI – Rear Bumper Face Bar, Prime Finish, Without Dual Exhaust, Without Park Sensor (Part No.CH1102369V)

Rear Bumper Face Bar, Prime Finish, Without Dual Exhaust, Without Park Sensor

from

$659.99
New, Economy Replacement Rear Bumper Face Bar, Prime Finish, Without Dual Exhaust, Without Park Assist Sensor Holes

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Or Modifications Needed For Installation
  • Same Form Fit As OE
See More

KAI – Fender Liner (Part No.CH1249130C)

Fender Liner

from

$117.99
New CAPA Certified Standard Replacement Passenger Side Fender Liner, 4WD, Mega Cab/2500/3500

Product Features:
  • 4WD, Mega Cab/2500/3500, Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rocker Panel (Part No.RRP3686)

Rocker Panel

from

$79.99
New Standard Replacement Passenger Side Rocker Panel, 2 Door Extened Cab, 76.25 X 7.5 X 4.25

Product Features:
  • 2 Door Extened Cab, 76.25 X 7.5 X 4.25, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Roll Pan (Part No.EFXRP11)

Roll Pan

from

$199.99
New ProEFX Rear Roll Pan With License Plate

Product Features:
  • With License Plate
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Roll Pan (Part No.EFXRP12)

Roll Pan

from

$199.99
New ProEFX Rear Roll Pan Without License Plate

Product Features:
  • Without License Plate
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – GM 1/4" Screw Rivets (Part No.961-050D)

GM 1/4" Screw Rivets

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

ARIES – 3 Inch Round Side Bars (Part No.205008)

3 Inch Round Side Bars

from

$158.99
ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Dodge Ram 1500, 2500 and 3500 (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:
  • Unique bends to contour to the body of the vehicle
  • Custom, non-skid step pads for safe entry and exit
  • 3″ diameter, heavy-wall tube design
  • High-strength carbon steel construction
  • Highly rust-resistant semi-gloss black powder coat and E-coat finish
  • No-drill, vehicle-specific application for a custom fit
  • Heavy-duty steel mounting brackets for a solid step
See More

Westin – Platinum 4 Oval Nerf Step Bars (Part No.21-3560)

Platinum 4 Oval Nerf Step Bars

from

$522.99
Westins Platinum 4 Oval Nerf Step Bars feature OE styling and offer an alternative look and style to traditional round tube steps. Their larger size provides strength and confidence with a full 4″ wide recessed step area. Platinum 4 Oval Nerf Step Bars ar

Product Features:
  • 90 Degree Mandrel Bends
  • 4 in. Wide Step Pad
  • 4.25 in. Wide At Widest Dimension
  • Polished Stainless Steel
  • Mount Kit Included
  • Lifetime Warranty
See More

Dorman – Interior Panel Retai (Part No.O6125962213DOR)

Interior Panel Retai

from

$2.51
Interior Panel Retai

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.120007)

Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System

from

$146.99
The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:
  • Protects Your Vehicle Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle Wheels
  • Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
  • Provide Protection For Your Vehicles Most Vulnerable Rust Area
  • Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
  • Molded From A Proprietary Thermoplastic Resin
  • No Drilling Required And Installs In Minutes
See More

WeatherTech – Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System (Part No.120026)

Direct-Fit, Pair, Contoured, Black, Thermoplastic, Quickturn ┐ Fastening System

from

$146.99
The WeatherTech MudFlap Laser Measured for a Perfect Fit set literally mounts in minutes without the need for wheel or tire removal, and most importantly without the need for drilling into the vehicles fragile painted metal surface. Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:
  • Protects Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle s Wheels
  • Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
  • Provide Protection For Your Vehicles Most Vulnerable Rust Area
  • Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
  • Molded From A Proprietary Thermoplastic Resin
  • No Drilling Required And Installs In Minutes
See More

ARIES – 6 Inch Oval Side Bar Mounting Brackets (Part No.4502)

6 Inch Oval Side Bar Mounting Brackets

from

$65.99
These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6″ oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6″ ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Product Features:
  • No-drill, vehicle-specific application for a custom fit
  • Compatible with 6″ oval track mounting system for easy, secure installation
  • Heavy-duty steel construction with a durable black powder coat finish
See More

Westin – Premier Oval Nerf Step Bar Mount Kit (Part No.22-1905)

Premier Oval Nerf Step Bar Mount Kit

from

$174.99
Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:
  • Required Part For Oval Tubes
  • Vehicle Specific Mount Kit Insures Proper Fit
  • 5 Year Warranty
See More

Dee Zee – Powder Coated, Black, Aluminum, Unlighted, Requires Running Board Mounting Kit (Part No.DZ15301A)

Powder Coated, Black, Aluminum, Unlighted, Requires Running Board Mounting Kit

from

$413.99
Dee Zee NXt Running Board Steps – The NXt step is designed for today trucks. A universal board combined with custom fit brackets (sold separately) fit all listed applications. The lightweight aluminum board features protective accent trim. Slip resistant raised Rubber grommets on step area give a sure step every time. NXt Running Boards are available in 3 distinct, Black powder coat board with black powder coat trim, Black powder coat board with UltraShine trim, stainless steel board with black powder coat trim.

Product Features:
  • Lightweight Aluminum Powder Coated Frame
  • Slip Resistant Grommets On Step Area
  • Widened 6 Inch Step Area For Sure Footing
  • Mounting Braces Not Included
See More

Westin – Molded Running Boards (Part No.27-0010)

Molded Running Boards

from

$453.99
Westin Molded Running Boards are straight board OE style designs, available in three universal lengths (72in, 79in, 93in). Universal running boards are made of an extruded aluminum base board, feature a 1-piece construction and provide step area grooves f

Product Features:
  • OE Style
  • UV Resistant Black Molded Polymer
  • Extruded Aluminum Base Board
  • Cradle Mounted Boards
  • Customized Mounting Brackets Sold Separately
  • Adds Perfect Finishing Touch To Vehicle
  • 5 Year Warranty
See More

KAI – Wheel Arch Panel (Part No.RRP1473)

Wheel Arch Panel

from

$99.99
New Standard Replacement Driver Side Rear Upper Wheel Arch Patch, 39 3/8 X 15 1/2

Product Features:
  • 39 3/8 X 15 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Wheel Arch Panel (Part No.RRP1474)

Wheel Arch Panel

from

$104.99
New Standard Replacement Passenger Side Rear Upper Wheel Arch Patch, 39 3/8 X 15 1/2

Product Features:
  • 39 3/8 X 15 1/2, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender (Part No.CH1240255V)

Fender

from

$509.99
New Economy Replacement Driver Side Fender

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender (Part No.CH1241269)

Fender

from

$433.99
New Standard Replacement Passenger Side Fender

Product Features:
  • Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender (Part No.CH1241232PP)

Fender

from

$492.99
New CAPA Certified Premium Replacement Passenger Side Fender, Except SRT10

Product Features:
  • Except SRT10, Made Of Galvanized Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rear Step Bumper Assembly, Primered, For 2002 Old Style Trucks (Part No.CH1102332V)

Rear Step Bumper Assembly, Primered, For 2002 Old Style Trucks

from

$506.99
New Economy Replacement Rear Step Bumper Assembly, Paint To Match, Fits 2002 Old Style Trucks

Product Features:
  • Paint To Match, Fits 2002 Old Style Trucks, Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Rear Step Bumper Assembly (Part No.CH1103111DSC)

Rear Step Bumper Assembly

from

$1030.00
New CAPA Certified Premium Replacement Rear Step Bumper Assembly, Chrome (Includes Inner And Outer Brackets/Pad And Lights)

Product Features:
  • Chrome (Includes Inner And Outer Brackets/Pad And Lights), Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Step Bumper Assembly (Part No.CH1103111PP)

Step Bumper Assembly

from

$659.99
New Premium Replacement Rear Step Bumper Assembly, Chrome (Includes Inner And Outer Brackets/Pad And Lights)

Product Features:
  • Chrome (Includes Inner And Outer Brackets/Pad And Lights), Made Of Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

2004 Dodge Ram 3500 Bodies and Fender Parts

Maybe you’re in the middle of a full rebuild of that 2004 Dodge Ram 3500. Maybe you just need a couple of Bodies and Fender Parts. Either way, Advance Auto Parts has 95 different Bodies and Fender Parts in our inventory ranging from $2.51 to $1,030.00. That means you can find the exact parts or products you need to keep that 2004 Dodge Ram 3500 running smoothly.

Bodies and Fender Parts are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2004 Dodge Ram 3500. Dorman, Dee Zee, and ARIES are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Bodies and Fender Parts for your 2004 Dodge Ram 3500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Bodies and Fender Parts to keep your 2004 Dodge Ram 3500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Bodies and Fender Parts Brands To Make Your 2004 Dodge Ram 3500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2004 Dodge Ram 3500 demands trusted brand parts and products to keep it running. Many trusted brands of Bodies and Fender Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Ram 3500 the best it can be. Be sure to browse some of our top Bodies and Fender Parts brands and parts.

Popular Westin Bodies and Fender Parts

We carry Westin parts in our stock across Side Bars and Sideskirts categories, plus more. For a 2004 Dodge Ram 3500, our most popular Westin Bodies and Fender Parts include:
Premier 6 Oval Nerf Step Bars
from $439.99
(1)
Premier 6 Oval Nerf Step Bars
Side Bars and Sideskirts

FAQs for 2004 Dodge Ram 3500 Bodies and Fender Parts

What are the most purchased Bodies and Fender Parts for the 2004 Dodge Ram 3500?

Out of 95 Bodies and Fender Parts for the 2004 Dodge Ram 3500, the most popular in our inventory are:
GM 1/4" Screw Rivets
from $4.49
This product is not rated
GM 1/4" Screw Rivets
Fender Molding Retainers
Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum
from $48.49
This product is not rated
Multi-Fit, 11" X 19", Set Of 2, Rectangle With Radius Notch, Black, Aluminum
Splash Guard (Mud Flap)
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
from $39.49
This product is not rated
11"X 19 Inch, Set of 2, Rectangle With Radius Notch, Aluminum, Screw On
Splash Guard (Mud Flap)