2004 Dodge Neon Transmission Parts

Below you will find various in-demand Dodge Transmission Parts, components and accessories for your 2004 Neon. Advance Auto Parts has popular Neon parts like Automatic Transmission Parts, Transmission Seals, Transmission Cooler and Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other Neon model years including 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2005 and more. Select a category of 2004 Dodge Neon Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2004 Dodge Neon Transmission Parts Categories

Transmission Torque Converters

OE Transmission Coolers

Torque Strut Mounts

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Back Up Lamp Switches

Transmission Pan Gaskets

Transmission Oil Cooler Fittings

Pinion Bearings

Transmission Mounts

Transmission Oil Pans

Transmission Oil Pan Gaskets

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Transmission Bushings

Automatic Transmission Control Solenoid Seals

Automatic Transmission Case Covers

Automatic Transmission Output Shaft Seals

Automatic Transmission Gear Position Sensors

Automatic Transmission Oil Pump Seals

Automatic Transmission Speed Sensor Connectors

Torque Converter Seals

Manual Transmission Output Shaft Seals

Shaft Seals

Miscellaneous Automatic Transmission Seals

Back Up Lamp Connectors

Automatic Transmission Fluid Filler Tube Seals

Remanufactured Automatic Transmissions

Manual Transmission Mount Bolt

Automatic Transmission Accumulator Piston

Auto Trans Differential Bearing and Race Set

Essential Transmission Parts for 2004 Dodge Neons

from

$27.99

Fixing a broken manual transmission shift cable usually requires replacing the entire cable assembly. This Dorman OE FIX shift cable bushing kit saves expense by allowing the replacement of just the failed bushing.

Product Features:

Convenient solution – this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – two different kits for specified Dodge, Chrysler or Plymouth vehicles, one containing two bushings and one end, and the other containing one bushing and one retaining clip
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$43.99

The transmission gear position sensor reports the location of the gear selector to the transmission or powertrain control module. The sensor input is used for back-up light illumination, transmission function as well as engine operating characteristics based on the position chosen.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$68.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. A Pedal Switch is a versatile component that can serve multiple functions, including activating brake lights, releasing cruise control, controlling backup lights, and ensuring safe clutch or neutral positioning. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$26.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$11.79

AT OIL PAN GASKET

from

$14.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$4.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$32.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$67.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$38.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$174.99

MT SHIFTER CABLE

from

$51.99

Anchor 3169 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2003-2010
Weight approx: 5 Lbs
Complete Mount
Large End: Bolt M14
Small End: Oe Stud

from

$8.99

Product Features:

Brand may vary by location

from

$9.59

AT SOLENOID GASKET

from

$184.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$35.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$9.99

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.

Product Features:

Guaranteed fitment
Calibrated per OE specifications to accurately measure transmission speed
Helps restore normal automatic transmission shifting operation

from

$4.29

AT SOLENOID SEAL

from

$125.99

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

Product Features:

Meets or exceeds OE specifications

from

$3.99

Product Features:

Brand may vary by location

from

$9.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$4.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$28.99

This automatic transmission case cover is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this automatic transmission case cover is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this cover is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.49

On certain Dodge, Chrysler and Plymouth vehicles, when an original equipment transmission pan is Leaking in need of routine service, loosening and lowering that fluid-filled pan is a messy business. This Dorman OE FIX transmission oil pan is designed to match the performance of the original equipment pan but features a convenient drain plug to allow the transmission fluid to be removed before service. This steel pan is also upgraded with an E-coat finish for excellent resistance to corrosion, and includes a filter assembly, gasket and integrated magnet for a complete repair solution.

Product Features:

Service-friendly – this transmission fluid pan for specified vehicles features an integrated drain plug to allow the trans fluid to be drained before servicing the pan, eliminating messy spills
Durable design – constructed to strict specifications and protected with an E-coat finish, this upgraded pan is engineered to withstand corrosion, impacts and leaks for long and reliable service life
Complete solution – includes pan with integrated magnet, filter assembly and gasket for a hassle-free, professional repair
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Upgrade your 2004 Dodge Neon with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2004 Dodge Neon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Transmission Parts are key to keeping your Neon functioning at its best. At Advance Auto Parts, we offer a wide selection of 67 Transmission Parts for the 2004 Dodge Neon, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2004 Dodge Neon at great prices. Our Transmission Parts inventory for this model ranges from just $3.99 to $2,557.00, with an average price of $87.18. Our 67 Transmission Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 2004 Dodge Neon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Dodge Neon, we stock popular OEM and aftermarket Transmission Parts from top names like National, Dorman, Imperial, and more. National Transmission Parts start at just $17.99 and boast an impressive 4.3 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Transmission Parts available starting at $27.99, and at an average 4.2 stars rating. With 1,397 customer reviews and counting, our 2004 Dodge Neon Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Dodge Neon is always ready to roll. We’re committed to providing you with everything you need to keep your Neon in top shape, all in one place. Start shopping confidently below for your 2004 Dodge Neon!

Best-Selling Automatic Transmission Parts for 2004 Dodge Neons

Enhance the driving experience in your Dodge with 10 quality Automatic Transmission Part components, starting at $4.29.

show more show less

from

$4.29

AT SOLENOID SEAL

from

$182.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Resistance and inductance matched to OE standards for proper fit, form and function.
Equipped with 100% copper winding for positive valve actuation on command.
Precision-machined mounting surface and included OE style gasket provide perfect sealing of the unit with the transmission case.

from

$27.99

Convenient solution – this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – two different kits for specified Dodge, Chrysler or Plymouth vehicles, one containing two bushings and one end, and the other containing one bushing and one retaining clip
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$174.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

Meets or exceeds OE specifications

from

$28.99

Direct replacement – this automatic transmission case cover is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this cover is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$109.99

Remanufactured to meet or exceed OE quality, with inherent OE flaws corrected to improve longevity and performance.

Product Features:

Meets or exceeds OE specifications
All blocks are serialized

from

$184.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$2557.00

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty(limited).

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$1999.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$4.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

Most Popular 2004 Dodge Neon Transmission Seals

Customize your Dodge with 8 Transmission Seals products like Manual Transmission Output Shaft Seals, Automatic Transmission Output Shaft Seals, and Automatic Transmission Oil Pump Seals, all priced under $14.99.

show more show less

from

$9.59

AT SOLENOID GASKET

from

$10.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.79

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.99

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$13.79

AT TORQUE CONVT SEAL

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$11.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$3.99

Product Features:

Brand may vary by location

Top Picks for 2004 Dodge Neon Transmission Cooler and Parts

Upgrade Dodge Neons with top-quality Transmission Cooler and Parts parts, including 11 OEM and aftermarket selections for your 2004 model.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

In-Demand Transmission Bearings for 2004 Dodge Neons

Select from 5 premium Transmission Bearings parts for your 2004 Dodge Neon, with prices ranging from $7.99 to $26.99.

show more show less

from

$11.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$26.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$8.99

Product Features:

Brand may vary by location

from

$16.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$7.99

Product Features:

PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Most Sold 2004 Dodge Neon Transmission Mounts

Explore our best-selling Dodge parts for the 2004 Neon among 7 OEM and aftermarket options starting from $4.99.

show more show less

from

$39.99

Anchor 2949 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2000-2009
Weight approx: 4 Lbs
Complete Mount
Large End: Bolt M12
Small End: Oe Stud

from

$34.49

Anchor 2948 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2000-2010
Weight approx: 3 Lbs
Complete Mount
Part Group: 2947, 2948

from

$60.99

Anchor 3050 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2000-2005
Weight approx: 4 Lbs

from

$135.99

Anchor 3124 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2002-2005
Weight approx: 5 Lbs

from

$19.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$19.99

Product Features:

Made from HYPER-Flex Polyurethane

from

$4.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

Top-Rated Transmission Parts Brands For Your 2004 Dodge Neon

Shop for the best-rated brands offering Transmission Parts and other products for your 2004 Dodge Neons. Below you’ll find some of our best rated Transmission Parts from National, Dorman, and Imperial, and more. Transmission Parts from these brands that fit a 2004 Neon start at just $17.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 2004 Dodge Neon Transmission Parts

When it comes to maintaining or upgrading your 2004 Dodge Neon, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 2004 Dodge Neon. With over 2 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $26.99. Plus, with over 26 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $17.99

(3)

Multi-Purpose Seal

“Great quality parts at good prices.”

from $35.99

(23)

Multi-Purpose Bearing

“fits my 86 cj7, seems to be good quality”

Popular Dorman 2004 Dodge Neon Transmission Parts

Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 2004 Dodge Neon owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2004 Neon, Advance Auto Parts carries a full inventory of 3 Dorman Transmission Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Dorman Transmission Parts range from $27.99 to $37.49, plus, with more than 42 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $37.49

(14)

Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart

“Perfect fit easy to install”

from $28.99

(17)

Transmission Input Speed Sensor

“Totally groovy and happening in far out ways!”

from $27.99

(11)

Shift Cable Bushing Kit (OE Fix)

“The bushings fit perfect, pressed right in.”

FAQs for 2004 Dodge Neon Transmission Parts

Which Transmission Parts are best-sellers for 2004 Dodge Neons?

Out of 67 Transmission Parts that fit 2004 Dodge Neons, the following parts are the top sellers:

Taper Bearing Set (5050626) – $11.49
Tapered Cone/Cup Wheel Bearing Set (5050723) – $26.99
Multi-Purpose Bearing (3275876) – $35.99

What’s the price range for 2004 Dodge Neon Transmission Parts?

Transmission Part prices for the 2004 Dodge Neon start at $3.99 and go up to $2,557.00 for the most premium parts.

What’s the average price of a Transmission Part for a 2004 Dodge Neon?

The average price for Transmission Parts for the 2004 Dodge Neon is $87.18. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Dodge Neon model years?

Yes, we currently carry Transmission Parts for 9 model years of Dodge Neons between 1995 and 2005. Transmission Parts are bought most frequently for the following model years: 2005, 2003, 2002, 2001, 2000, 1999, 1998, 1997, and 1996.

What are the cheapest Transmission Parts for my 2004 Dodge Neon?

The cheapest 2004 Dodge Neon Transmission Parts we carry in stock are:

Auto Transmission Manual Shaft Seal (11494000) – $3.99
AT SOLENOID SEAL (11239035) – $4.29
42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (50074153) – $4.99
OE Replacement (50074287) – $4.99
Bearing Race (3277119) – $7.99

What are the top-rated Transmission Parts that fit the 2004 Dodge Neon?

Out of 1,397 reviews by customers, our 2004 Dodge Neon Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2004 Dodge Neon and their top-rated products:

Automatic Transmission Pan and Gaskets
- Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (3205789) – $12.99
- Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart (26949829) – $37.49
Automatic Transmission Differential
- Transmission Oil Pan Gasket 14 Bolt Hole One Piece Gasket (3205789) – $12.99
- Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart (26949829) – $37.49

What types of Transmission Parts do you sell for my 2004 Dodge Neon?

As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 2004 Dodge Neon:

Can I get help with 2004 Dodge Neon Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Transmission Parts and more.

What is your return policy for Dodge Neon Transmission Parts?

Advance Auto Parts keeps returns simple. For new Dodge Neon Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Dodge Neon Transmission Parts

Dorman – Help – Shift Cable Bushing Kit (OE Fix) (Part No.14044)

Carquest Premium – Automatic Transmission Gear Position Sensor (Part No.SAC3774)

Carquest Premium – Back Up Light Switch (Part No.SBA4502)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

ATP – AT OIL PAN GASKET (Part No.TG-102)

National – Multi-Purpose Seal (Part No.710797)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.6501474)

Carquest Premium – Automatic Transmission Speed Sensor Connector (Part No.FAA1135)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1195)

Carquest Premium – Multi-Use Connector (Part No.PTA1089)

ATP – MT SHIFTER CABLE (Part No.Y-1312)

Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.3169)

Driveworks – Tapered Roller Bearing (Part No.S-JL-69349)

ATP – AT SOLENOID GASKET (Part No.TG-31)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBE4945)

National – Multi-Purpose Bearing (Part No.A-35)

Autotecnica – Transmission Speed Sensor (Part No.CY1320197)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.CR42)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-8609)

National – Multi Purpose Seal (Part No.8609)

Schaeffler – Shaft Seal (Part No.SS2627)

Crown Auto Jeep Replacmnt – 42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (Part No.4446544)

Imperial – Mounting Kit System (Part No.226201)

Dorman – Automatic Transmission Pan (Part No.265-820)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 9.5 Quart (Part No.265-801)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Carquest – Automatic Transmission Control Solenoid (Part No.S9863)

Dorman – Help – Shift Cable Bushing Kit (OE Fix) (Part No.14044)

Pro-King – Automatic Transmission Solenoid Block (Part No.52-0217)

Dorman – Automatic Transmission Pan (Part No.265-820)

Pro-King – Remanufactured Transmission Solenoid Block (Part No.RTS105)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBE4945)

Spartan – Automatic Transmission Assembly; Chrysler FWD 604 4-Speed (Part No.2261-2Y)

Shift Pro by ETE – A604 Automatic Transmission Assembly (Part No.T150816)

Crown Auto Jeep Replacmnt – 42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (Part No.4446544)

ATP – AT SOLENOID GASKET (Part No.TG-31)

Driveworks – Oil Seal (Part No.S-331228H)

National – Multi-Purpose Seal (Part No.3459)

National – Multi Purpose Seal (Part No.8609)

ATP – AT TORQUE CONVT SEAL (Part No.TO-4)

National – Multi-Purpose Seal (Part No.710797)

Schaeffler – Shaft Seal (Part No.SS2627)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-8609)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Driveworks – Taper Bearing Set (Part No.S-A-18)

Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-35)

Driveworks – Tapered Roller Bearing (Part No.S-JL-69349)

National – Bearing (Part No.JL69349)

National – Bearing Race (Part No.JL69310)

Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.2949)

Anchor – Torque Strut Motor Mount: Right, 1 Piece (Part No.2948)

Anchor – Transmission Mount: Left, 1 Piece (Part No.3050)

Anchor – Transmission Mount: Left, 1 Piece (Part No.3124)

Energy Suspension – Manual Transmission Shifter Stabilizer Bushing Set (Part No.5.1110R)

Energy Suspension – Manual Transmission Shifter Stabilizer Bushing Set (Part No.5.1110G)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.6501474)