2004 Chevrolet Silverado 2500 Ignition and Tune-Up Products
More 2004 Chevrolet Silverado 2500 Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2004 Chevrolet Silverado 2500, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2004 Chevrolet Silverado 2500 Ignition and Tune-Up Products
ACDelco – Ignition Coil Wire (Part No.356G)
from
$87.99
ACDelco GM Original Equipment Ignition Coil Lead Wires are induction coils in a vehicle’s ignition system that send power from the battery through the spark plugs to ignite the fuel in the engine cylinders, and are GM-recommended replacements for your vehicle’s original components. These original equipment ignition coil lead wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Insulated to help protect the interior conductor wire
- Form fitting boots on each end prevent moisture from entering the coil or distributor
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Spark Plug Wire (Part No.350R)
from
$24.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Durable to help transfer high voltage pulses without damage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IT16TT (Part No.4713)
from
$10.99
Durability of an OE style plug combined with Power & Torque of high performance.
Product Features:
See More
Product Features:
- 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
- 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
- DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Durability of an OE style plug combined with Power & Torque of high performance.
- Withstands temperatures greater than 4000┬░ Fahrenheit
- Iridium TT
- Advanced Twin-Tip Technology: Combines a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode for superior ignition and efficiency.
- Enhanced Fuel Economy and Lower Emissions: Designed to provide better fuel economy and reduced emissions, allowing you to drive around the Earth over 4 times.
- Original Equipment Specification: Developed from the Super Ignition Plug (SIP) design, ensuring reliable and consistent performance.
Carquest – A/C Compressor Connector (Part No.PT770)
from
$16.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
- Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
- All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
- Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid Connector (Part No.PTA1107)
from
$24.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest – Ignition Switch (Part No.CS643)
from
$44.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Copper alloy conductors ensure superior electrical conductivity with low resistive losses
- Our parts are 100% tested to verify both mechanical and electrical switching performance
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
MSD Ignition – Coil; Pro Power; GM L-Series Truck 99-07; Single (Part No.8286)
from
$117.99
MSD ignition’s Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance. There are two types of housings for the MSD coils. Check your application for the visual match.
Product Features:
See More
Product Features:
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
Dorman – Knock Sensor And Harness Kit (Part No.926-084)
from
$94.99
Check engine light on and vehicle running rough? Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.
Product Features:
See More
Product Features:
- Complete solution – this knock sensor kit includes two knock sensors and the wiring harness that connects them
- Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
- Quality assured – benchmarked against original components for performance and quality
- Excellent value – original equipment quality at significant cost savings
ACDelco – Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9748HH)
from
$124.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)
from
$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.
Product Features:
See More
Product Features:
- Most Advanced Wire By Mallory
- RFI Suppression
- High Temperature Silicone Jacket
- Withstands Over 500+F
- Come In Ready To Use Kits
- Extra Long Kits
JBA Performance – W08559 Ignition Wires 99-06 GM Truck 4.8/5.3/6.0L Blue (Part No.W08559)
from
$103.99
JBA PowerCables ignition wires are less than half the resistance of most factory wires, which frees sparkenergy and increases performance! Get as much as 5+ hp gain with JBA PowerCables as tested by CarCraft Magazine.
Product Features:
See More
Product Features:
- JBA Performance Exhaust W08559 Ignition Wires 99-06 GM Truck 4.8/5.3/6.0L Blue
- Extra thick diameters for improved under hood appearance
DENSO – Spark Plug Wire Set: Aluminum Steel Core, 8 Wire Set (Part No.671-8063)
from
$95.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA1136)
from
$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Help – Knock Sensor Grommet (Part No.42003)
from
$14.99
This ignition knock (detonation) sensor seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability & reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this ignition knock (detonation) sensor seal is designed to match the fit and function of the original seal on specified vehicles.
- Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ACDelco – Gray Multi-Purpose Pigtail (Part No.PT2655)
from
$72.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest – Cornering Light Socket (Part No.PT189)
from
$23.29
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
- Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
- Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
- High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
- Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
Dorman – GM Panel Retainer (Part No.963-021D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3654)
from
$57.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Knock Sensor (Part No.AS10017)
from
$71.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Delphi knock sensors help maximize engine performance with all fuels
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
NTK – Ignition Knock (Detonation) Sensor (Part No.ID0116)
from
$67.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
- NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
- The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
GM Genuine Parts – Fuel Injection Fuel Rail Bolt (Part No.12554211)
from
$9.99
GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
MSD Ignition – Coils; GM LS Truck 99-07; 8-Pack (Part No.82638)
from
$592.99
Looking to replace your worn out LS coils with a more efficient upgrade? The new MSD Blaster LS Coil line is ideal for your modern GM muscle car or truck. The coils are designed as a bolt-in replacement yet have been thoroughly tested and detailed by our experienced engineering team. The improved efficiency of these Blaster Coils will give your LS the ignition boost you’re looking for.
Product Features:
See More
Product Features:
- Replacement Coil
- Full One Year Warranty
Accel – Coil:GM Ls2 Ls3 Ls7 8-Pack-Black (Part No.140043K-8)
from
$628.99
Now you can have ACCEL late model Supercoils in additional colors
Product Features:
See More
Product Features:
- These coils feature advanced bobbin technology.
- Highly specialized silicone magnetic steel cores with optimized windings
- Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment.
- These are a direct performance bolt on upgrade.
- The ACCEL bodies are molded in a high dielectric strength material.
MSD Ignition – Coils; GM L-Series Truck 99-09; 8-Pack (Part No.82648)
from
$499.99
Looking to replace your worn out LS coils with a more efficient upgrade? The new MSD Blaster LS Coil line is ideal for your modern GM muscle car or truck. The coils are designed as a bolt-in replacement yet have been thoroughly tested and detailed by our experienced engineering team. The improved efficiency of these Blaster Coils will give your LS the ignition boost you’re looking for.
Product Features:
See More
Product Features:
- Replacement Coil
- Full One Year Warranty
MSD Ignition – Coil; Street Fire; GM L-Series Truck 99-09; 8-Pack (Part No.55108)
from
$409.99
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
Product Features:
See More
Product Features:
- Increased Spark Energy Over The Entire RPM Range Of The Engine
- Coils Bolt In Place Of The Factory Units
- Accepts OEM Connections For A Simpler Installation
MSD Ignition – Coils; Street Fire; GM L-Series Truck 99-07; 8-Pack (Part No.55098)
from
$471.99
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
Product Features:
See More
Product Features:
- Increased Spark Energy Over The Entire RPM Range Of The Engine
- Coils Bolt In Place Of The Factory Units
- Accepts OEM Connections For A Simpler Installation
Accel – Coil:GM Ls2 Ls3 Ls7 8-Pack (Part No.140043-8)
from
$519.99
ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.
Product Features:
See More
Product Features:
- These coils feature advanced bobbin technology.
- Highly specialized silicone magnetic steel cores with optimized windings
- Specialized high temperature epoxy filled housings resists shock, vibration, chemicals, and overall engine bay environment.
- These are a direct performance bolt on upgrade.
- The ACCEL bodies are molded in a dielectric high-strength material.
- 8 Pack
MSD Ignition – Coils; Pro Power; GM L-Series Truck 99-07; 8-Pack (Part No.82868)
from
$991.99
MSD ignition’s Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance. There are two types of housings for the MSD coils. Check your application for the visual match.
Product Features:
See More
Product Features:
- Multiple Sparks At Idle RPM
- Direct Bolt-In to Factory Connectors
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
Popular 2004 Chevrolet Silverado 2500 Ignition and Tune-Up Products Categories
2004 Chevrolet Silverado 2500 Ignition and Tune-Up Products
You count on your 2004 Chevrolet Silverado 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 88 Ignition and Tune-Up Products ranging in price from $2.99 to $991.99, you’re sure to find everything you need for your 2004 Chevrolet Silverado 2500.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 16 different brands like NGK, ACDelco, and Autolite. 2004 Chevrolet Silverado 2500 Ignition and Tune-Up Products start as low as $2.99!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,823 extensive product reviews on 2004 Chevrolet Silverado 2500 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit with 4.6 stars and Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit with 4.7 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2004 Chevrolet Silverado 2500 below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2004 Chevrolet Silverado 2500
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Chevrolet Silverado 2500 running right for years to come. In our inventory you’ll find brands like NGK, ACDelco, Autolite, and even more.
Popular Carquest Ignition and Tune-Up Products
You’ll find popular Carquest brand products across Ignition Switches and Distributors. All are waiting to get your 2004 Chevrolet Silverado 2500 back on the road. Some of the top-rated Carquest products in these categories are:
Top-Rated ACDelco Ignition and Tune-Up Products
If ACDelco are what you’re looking for, our inventory holds plenty. We stock ACDelco brand Ignition and Tune-Up Products for your 2004 Chevrolet Silverado 2500, and some of our most reviewed ACDelco parts include:
from
$124.99
(139)
Spark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core
Ignition Coil Boots
FAQs for 2004 Chevrolet Silverado 2500 Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2004 Chevrolet Silverado 2500?
Out of 88 Ignition and Tune-Up Products for the 2004 Chevrolet Silverado 2500, the most popular in our inventory are:
from
$9.99
This product is not rated
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
What are the top-rated 2004 Chevrolet Silverado 2500 Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2004 Chevrolet Silverado 2500 based on customer reviews/ratings are:
from
$73.99
(160)
Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit
“Right fit”
from
$80.99
(146)
Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit
“The fit and work just happened to blow my transmission 😂😂😂”
from
$3.49
(117)
Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration
“Good seller”
