2004 Chevrolet Express 2500 Steering and Chassis Parts

Essential 2004 Chevrolet Express 2500 Steering and Chassis Parts

Dorman – Lower Steering Shaft (Part No.425-192)

Lower Steering Shaft

from

$157.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.

Product Features:
  • Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
  • Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
  • Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
  • Corrosion resistant – salt spray testing and premium coating help ensure future longevity
See More

Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8763)

Steering Gear Complete Pitman Shaft Seal Kit

from

$67.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Air Bag Connector (Part No.PTA2152)

Air Bag Connector

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed for the OE distributor as a direct replacement part
See More

Rare Parts – Conrol Arm W/Bj (Part No.RP11630)

Conrol Arm W/Bj

from

$261.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

MOOG – Idler Arm Grease Hose Kit (Part No.K6714)

Idler Arm Grease Hose Kit

from

$31.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
  • Restores like-new steering and handling
  • Greaseable design
See More

Carquest Premium – Back Up Light Connector (Part No.PTA1061)

Back Up Light Connector

from

$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

MOOG – Stabilizer Bar Kit (Part No.K170004)

Stabilizer Bar Kit

from

$261.99
MOOG solid sway bar kits, complete with sway bar links and bushings with synthetic fabric liner (where applicable), are made of solid, forged steel for improved durability over hollow designs, reducing the likelihood of breakage due to rusted welds.

Product Features:
  • COMPLETE SOLUTION — Includes MOOG solid sway bar, Problem Solver® sway bar link kit and synthetic fabric-lined bushings (where applicable)
  • STRUCTURAL STRENGTH — Solid forged steel construction resists breaking and offers improved strength and long life over hollow OE sway bar
  • CORROSION PROTECTION — Durable black E-coating inhibits premature deterioration
  • EASY TO INSTALL — Precision tolerances for easy installation giving you a perfect fit right out of the box
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Powercraft – Pump Complete Rebuild Kit (Part No.7910)

Pump Complete Rebuild Kit

from

$62.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Pressure Hose Assembly (Part No.37367)

Pressure Hose Assembly

from

$70.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Driveworks – Ball Joint (Part No.DW-K6541)

Ball Joint

from

$62.99
Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot provides extended temperature range and better wear resistance
  • Test-proven stud material helps prevent premature stud failure
  • Provides premium gauge steel construction for strength and durability
  • Performance tested to ensure durability
See More

Driveworks – Idler Arm Bracket (Part No.DW-K6723)

Idler Arm Bracket

from

$77.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:
  • Contains an internal diaphragm spring that absorbs shock and vibration for a smoother ride
  • Designed with double-tapered bearing that decreases deflection and helps preserve proper toe setting
  • Weather resistant
See More

Driveworks – Alignment Kit – Front (Part No.DW-K100026)

Alignment Kit - Front

from

$46.99
Alignment Kit – Front

Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)

Transmission Oil Cooler Replacement Hose

from

$14.49
Covered in black Hypalon
See More

Carquest Premium – SWAY BAR BUSHING (Part No.224-239523)

SWAY BAR BUSHING

from

$9.99
Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

ACDelco – P/S Reservoir (Part No.M2030524424ACD)

P/S Reservoir

from

$178.78
P/S Reservoir

Dorman – Steering Column Shift Mechanism (Part No.905-101)

Steering Column Shift Mechanism

from

$163.99
This steering column shift mechanism is designed to match the original components required to repair the steering column on specified vehicles, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this steering column shift mechanism is designed to match the original components required to repair the steering column on specified vehicles
  • Restores functionality – reliable replacement for an original mechanism that has failed due to wear or collision damage
  • Durable construction – this mechanism is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Cardone New – Rack and Pinion Assembly (Part No.97-1018)

Rack and Pinion Assembly

from

$582.99
CARDONE Engineered Technology ensures that all CARDONE New Rack and Pinion units meet or exceed O.E.M. performance. Based on over 50 years of reverse-engineering expertise, original design weaknesses are identified and improved, resulting in premium-quality, brand-new parts you can rely on. All units adhere to strict S.A.E. specifications and are tested to ensure reliable, long-lasting performance.

Product Features:
  • Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
  • Performance testing ensures perfect fit, function and reliable performance.
  • Computerized spool valve balancing ensures exceptional steering feel.
  • Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
  • Built to meet or exceed O.E.M. performance.
See More

Driveworks – Tie Rod End (Part No.DW-EV80191)

Tie Rod End

from

$46.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

Rare Parts – Idler Arm (Part No.RP20900)

Idler Arm

from

$46.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Reduces wander
  • Reduces vibration
  • Reduces tire wear
See More

MOOG – Tie Rod End (Part No.ES2837RL)

Tie Rod End

from

$85.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Caster/Camber Adjusting Kit (Part No.K100026)

Caster/Camber Adjusting Kit

from

$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

National – Multi Purpose Seal (Part No.7013S)

Multi Purpose Seal

from

$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Carquest Premium – Pitman Arm (Part No.600-95208)

Pitman Arm

from

$86.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

Lares – Remanufactured Power Steering Gear Box (Part No.1420)

Remanufactured Power Steering Gear Box

from

$372.99
Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.9234)

Steering Gear Input Shaft Seal Kit

from

$18.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1022)

Power Steering Pressure Switch

from

$55.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Maval – Power Steering Pump, Remanufactured (Part No.M2010389155MAV)

Power Steering Pump, Remanufactured

from

$127.93
Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features:
  • OEM-Quality and Direct Fit replacement
  • Components are inspected and cleaned of rust and corrosion.
  • Shaft and internal surfaces are inspected, reconditioned and polished.
  • Seals and O-rings are replaced with new, OE-equivalent parts.
  • Assembled units are 100% functionally tested for leaks and performance.
See More

2004 Chevrolet Express 2500 Steering and Chassis Parts

You count on your 2004 Chevrolet Express 2500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 194 Steering and Chassis Parts ranging in price from $2.99 to $877.99, you’re sure to find everything you need for your 2004 Chevrolet Express 2500.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 16 different brands like Moog, Driveworks, and Imperial. 2004 Chevrolet Express 2500 Steering and Chassis Parts start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 8,684 extensive product reviews on 2004 Chevrolet Express 2500 Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Steering Oil Cooler with 3.7 stars and Power Steering Filter with 3.8 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2004 Chevrolet Express 2500 below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 2004 Chevrolet Express 2500

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 Chevrolet Express 2500 running right for years to come. In our inventory you’ll find brands like Moog, Driveworks, Imperial, and even more.

Popular ACDelco Steering and Chassis Parts

You’ll find popular ACDelco brand products across Ball Joints. All are waiting to get your 2004 Chevrolet Express 2500 back on the road. Some of the top-rated ACDelco products in these categories are:
Advantage Suspension Ball Joint Assembly
from $48.50
(1)
Advantage Suspension Ball Joint Assembly
Lower Ball Joints

Top-Rated MOOG Steering and Chassis Parts


If MOOG are what you’re looking for, our inventory holds plenty. We stock MOOG brand Steering and Chassis Parts for your 2004 Chevrolet Express 2500, and some of our most reviewed MOOG parts include:
Ball Joint
from $92.99
(45)
Ball Joint
Lower Ball Joints
Stabilizer Bar Bushing Kit
from $27.49
(22)
Stabilizer Bar Bushing Kit
Sway Bar Link Bushing Kits
Tie Rod End
from $99.99
(22)
Tie Rod End
Tie Rod Ends

FAQs for 2004 Chevrolet Express 2500 Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2004 Chevrolet Express 2500?

Out of 194 Steering and Chassis Parts for the 2004 Chevrolet Express 2500, the most popular in our inventory are:
Control Arm and Ball Joint Assembly
from $91.99
(9)
Control Arm and Ball Joint Assembly
Lower Control Arm and Ball Joints
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

What are the top-rated 2004 Chevrolet Express 2500 Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 2004 Chevrolet Express 2500 based on customer reviews/ratings are:
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
“Installed and properly working”
Power Steering Filter
from $31.99
(59)
Power Steering Filter
“Looks good and fits well, plus LTW”
Pitman Arm
from $73.99
(35)
Pitman Arm
“Great Product, Good value!”