from

$14.99

Product Features:

Reduces heat & wear
Eliminates TQ converter shudder & clutch pack chatter
For all automatic transmissions & 4×4 transfer cases

from

$25.99

Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:

Maximizes horsepower
Extends gear and bearing life
Reduces operating temperature
Lower coefficient of friction
Superior corrosion protection
Separates rapidly from water
For use with open, limited-slip and locking differential
Contains limited-slip friction modifier
Made in USA

from

$11.49

European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
Extra wear protection vs. industry and oem standards with advanced anti-wear additives
Superior performance for european gasoline and diesel engines
Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
Superior engine sludge and varnish protection for European-made gasoline and diesel engines.

from

$7.99

Prestone® DOT 4 Motor Vehicle Brake Fluid delivers enhanced performance vs. DOT standards, benefitting all vehicles calling for DOT 4. This synthetic fluid starts with a higher dry boiling point than the DOT minimum standard to protect against overheating, brake fade and performance decline due to water absorption. This extended life (50,000 mile) fluid is also formulated to prevent corrosion of all metals within the braking system. This formula is safe to use in all DOT 4 braking systems (ABS, disc or drum) and can mix with any DOT 4 fluid. It is recommended to only use the DOT fluid specified for your car, as using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

50,000 Mile Fluid Life
Prevent Overheating & Brake Fade with High Grade Formula
Protects against performance decline due to water absorption. Prevents corrosion of all metals within the braking system.
Synthetic, Extended Fluid Life Formula

from

$15.49

Prestone® MAX DOT 4 Motor Vehicle Brake Fluid is our highest grade formula, maximizing performance vs. DOT standard. Prestone MAX is our best brake fluid at protecting against overheating and brake fade. With 75,000 mile fluid life, our longest life fluid has 1.5X more miles between replacement than regular Prestone DOT 3. Prestone MAX has superior performance in severe braking conditions when compared to regular Prestone DOT 4, which means even more piece of mind about the braking system. This synthetic fluid starts with our highest dry boiling point giving our best protection against performance decline due to water absorption. Prestone MAX DOT 4 is safe to use in all DOT 4 braking systems, ABS, disc or drum, and can mix with any DOT 4 fluid. Mixing Prestone MAX with other fluids will lower the performance rating for miles and boil points, for best results replace completely with Prestone MAX DOT 4. It is recommended to only use the DOT fluid specified for your car. Using a different DOT product can affect the boiling point or replacement interval if the wrong fluid is used.

Product Features:

75,000 Mile Fluid Life
Prevent Overheating & Brake Fade with Our Highest Grade Formula. Prevents corrosion of all metals within the braking system.
Superior Protection in Extreme Braking Conditions
Synthetic, Long Life Formula – 1.5X Longer than regular Prestone DOT 4

from

$17.99

Prestone All Vehicles antifreeze+coolant (concentrate) is truly designed to work with all vehicles; all makes, models, years & fluid colors. It is designed to work with all new engines, while also being backwards compatible improving protection in all old

Product Features:

Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT & IAT.
Longer Engine Life Guarantee – 10 Yr., 300,000 mile Extended life formula.
Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

from

$19.99

Prestone® Platinum antifreeze+coolant is Prestone’s best universal antifreeze & coolant product. GUARANTEED to work with all vehicles; all makes, models, years & fluid colors. 15+ years, 350,000 miles of protection; the fluid is guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 Deg. F) and overheating / boiling over of the engine (+268 Deg. F). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup & scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling sytem protection, allowing the system to run optimally, like when it was new. Internal buildup & corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:

Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT & IAT; G05®, G11®, G12®, G12++®, G13®, G30®, G40®, & GG40®. For all engines & engine sizes, new and older engines.
15+ Yr., 350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
Includes our most advanced Prestone Cor-Guard® technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs / 350,000 miles.
Ready to Use formula – Prediluted 56/54. Perfect for small volume top-off or complete drain and refill of the cooling system

from

$9.99

Prestone® Power Steering Fluid (PSF) delivers increased system life. Designed with Anti-wear System Protection, Prestone PSF protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

50,000 Mile Fluid Life
Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
For use in all manufacturers
Conventional Formula – For use in all manufacturers

from

$6.99

Prestone® Power Steering Fluid + Stop Leak (PSF+SL) delivers increased system life and prevents & stops system leaks. Stop Leak additives renew, restore and condition seals in the power steering system. These seals harden and shrink over time which are the likely cause of leaks. The stop leak additives also prevent leaks by rejuvenating seals before they leak. Also designed with Anti-wear System Protection, Prestone PSF+SL protects against pump failure, squeals and clogs. This 50,000 mile fluid life is formulated for use in all manufacturers; cars, SUVs, crossovers, and light and medium duty trucks. This a conventional fluid. Many cars 2006 and newer use synthetic based fluids for longer life and better protection. Conventional and synthetic fluids can be mixed but performance and replacement intervals are reduced by the conventional fluid.

Product Features:

50,000 Mile Fluid Life
Includes Stop Leak Additives to prevent and stop power steering system leaks.
Anti-Wear Protection = Increased System Life. Protects against pump failure, squeals and clogs. Corrosion protection for metals, rubber & gasket components.
Conventional Formula – For use in all manufacturers

from

$30.66

CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis

from

$43.99

All-year oil for gasoline and diesel engines. Modern multi-purpose low-friction motor oil developed according to the latest technology. Unconventional base oils based on HC synthetic technology were combined with the most modern additive technology. The low-viscosity and high sheer stability of the motor oil guarantees optimal cleanliness, reduces frictional loss in the engine and provides outstanding protection against wear. The results are savings in fuel and an extended service life for the engine. Tested for turbochargers and catalytic converters.

Product Features:

High-tech low-viscosity engine oil
Advance wear protection formula
Fastest cold start oiling during start up
Provides ideal oil pressure under all operating conditions
Keep oil consumption low
Made in germany

from

$66.99

Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 5 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.

Product Features:

Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology
HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
Reduces friction and metal-to-metal contact for peak engine performance
Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up

from

$10.29

Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings

from

$13.99

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON®, GM DEXRON®-II and DEXRON®-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III , Toyota/Lexus Type T, T-III and T-IV , Honda/Acura ATF-Z1 (except in CVTs) , Mercedes Benz NAG1 , Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$13.49

Certified A/C Pro R-134a PAG 100 Refrigerant Oil with ICE 32. This product contains approximately 8 fluid ounces of PAG refrigerant oil with ICE32. Medium viscosity PAG oil for R-134a auto A/C systems; ISO 100 viscosity. R-134a PAG 100 AC Oil Lubricant with ICE32 Lubricant Enhancer features advanced chemistry to help extend compressor life and improve cooling capacity. The PAG oil helps quiet noisy compressors. Meets OEM specifications.

Product Features:

Medium viscosity PAG oil for R-134a auto A/C systems; ISO 100 viscosity
ICE32 Lubricant Enhancer: advanced chemistry to help extend compressor life and improve cooling capacity
Meets OEM specifications

from

$44.99

Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc. It is suitable for all extreme conditions and guarantees full performance from -40C to over 130C system temperature.

Product Features:

Ideal for cold weather climates.
Operating temperature range from -40C to 130C
Works perfectly under extreme temperature changes.
Used by more then 25 global vehicle manufactures as OE first-fill.

from

$13.49

Only compatible with R134a refrigerant; Tools required for installation; Plastic bottle; Universal applications

from

$12.29

Automatic transmission fluid is a technologically advanced, low viscosity formulation specially designed to deliver performance and maximum fuel efficiency for modern automatic transmissions.

Product Features:

Full Synthetic, low viscosity formulation
OEM approved and licensed by Ford (MERCON® LV) and GM (DEXRON® -VI)
Low viscosity formula for maximum fuel efficiency in modern automatic transmissions
Enhanced friction durability for smooth transmission performance
Superior high temperature protection to effectively resist oxidation
Unsurpassed protection against copper corrosion
Industry Specifications and OEM Approvals: JASO-1A
Licensed and approved for use in: All GM vehicles (DEXRON®-VI, All previous DEXRON®); All Ford vehicles which specify Mercon® LV

from

$14.49

Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions whe

Product Features:

Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Advanced anti-wear technology provides maximum protection to gears and bearings
Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking

from

$25.99

Castrol Transmax ATF/CVT Universal is a technologically advanced full-synthetic formulation designed to deliver excellent performance in most of the traditional stepped automatic transmissions and Continuously Variable Transmissions currently in use. It is also suitable for use in hybrids.

Product Features:

Coverage of over 300 specs/95% of vehicles in operation
Broad scope of vehicle applications improves workshop efficiency and inventory management
Enhanced friction durability for smooth transmission performance
Superior high temperature protection to effectively resist oxidation

from

$22.99

Product Features:

Fully Synthetic
Advance transmission protection from standard to sever duty
Resist thermal breakdown, oxidation, varnish and sludge

from

$36.49

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$49.99

Castrol Transmax High Mileage is specially formulated for transmissions with over 75,000 miles to deliver superior performance for maximum transmission life. It features additional seal conditioners to help stop leaks and cleaning agents to reduce varnish and deposit formation. It also protects against clutch wear and restores smooth shifting and can be used in a wide variety of specifications including DEXRON®-IIIH, MERCON® and JASO-1A.

Product Features:

Additional seal conditioners help stop leaks.
Extra cleaning agents reduce varnish and sludge formation.
Protects against clutch wear and restores smooth shifting.
Recommended for use in new & older vehicles that require:

from

$8.79

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also recommended for transmissions, power steering systems, and hydraulic systems requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is recommended for use in all transmissions, hydraulic systems, and power steering units manufactured by American, European, Korean, Japanese and other manufactures from around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

Good foam and corrosion prevention
Safe for seals
Promotes smooth shifting
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

from

$11.49

FRAM Global ATF is formulated to meet the fluid needs of a broad range of automatic transmissions. Using advanced additive technology and base fluids, it is suitable for service fill of many transmissions manufactured by North American, Asian, and European OEMs. FRAM Global ATF provides oxidation and thermal stability, friction control, load-carrying ability, corrosion and wear protection. It helps protect against the formation of sludge, varnish and foam. FRAM Global ATF has exceptional low temperature flow properties and enhanced protection against viscosity breakdown at high temperatures. It also has exceptional oxidation and thermal stability, resulting in maximum service life.

Product Features:

Maintains friction control for smooth shift action and protection against shudder
Retains high temperature viscosity resulting in maximum oil film thickness and excellent wear
Controls sludge, corrosion, and wear of gears
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

from

$96.99

FRAM DEX III/MERC ATF is formulated for older model Ford and General Motors vehicles requiring MERCON®, DEXRON-I®, DEXRON-II® and DEXRON-III®. It is also recommended for transmissions, power steering systems, and hydraulic systems requiring a DEXRONIII® or Caterpillar TO-2 fluid. FRAM DEX III/MERC ATF may also be used in compressors, pumps, and hydraulic systems. FRAM DEX III-H/M ATF is recommended for use in all transmissions, hydraulic systems, and power steering units manufactured by American, European, Korean, Japanese and other manufactures from around the world specifying DEXRON®III H/Mercon® and earlier DEXRON®/Mercon® type transmission fluids.

Product Features:

Good foam and corrosion prevention
Safe for seals
Promotes smooth shifting
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE FLUID FOR YOUR TRANSMISSION
TRANSMISSION FLUIDS ALSO APPLICABLE IN POWER STEERING UNITS; CHECK OWNERS’ MANUAL

from

$7.99

Castrol® Transmax DEX/MERC includes enhanced friction durability for smooth transmission performance. Designed for use in older Ford and GM vehicles.

Product Features:

Enhanced friction durability for smooth transmission performance
Meets DEXRON®-III H requirements; also satisfies requirements of DEXRON®, DEXRON®-III, IIE, and II; do not use this ATF in applications calling for DEXRON®-VI
Meets MERCON® requirements; may also be used in power steering applications where MERCON® is required; use Castrol Type F ATF in applications calling for Type F
Do not use this ATF in applications calling for MERCON® V or MERCON® SP

from

$71.99

Full-Synthetic; Heavy Duty Automatic Transmission; BP Autran Syn-295 is a full-synthetic, heavy duty automatic transmission fluid approved for use under Allison TES-295. It is formulated to maintain its stability, even under the most severe operating conditions.

Product Features:

Formulated with high viscosity index 100% synthetic base fluids and specific additives in order to exceed Allison requirements and provide outstanding wear protection
Keeps transmissions cooler, offering excellent shear stability, low oxidation and high heat capacity
Provides superior high/low temperature performance due to high VI synthetic base fluids and has excellent corrosion and foaming resistance
BP Autran Syn-295 also has an Allison TES-468 approval for use in Allison Hybrid Electric Drive Transmissions
Other OEM approvals include Allison C-4, Voith and ZF transmissions
BP Autran Syn-295 is an ideal transmission fluid for light duty application vehicles, such as:
Inter/intra-city buses & school buses
Emergency vehicles
Delivery trucks & vans
Recreational vehicles & motor homes
Refuse vehicles
On/off-highway vehicles

2004 BMW 325Ci Fluids and Chemicals

More 2004 BMW 325Ci Fluids and Chemicals Categories

Essential 2004 BMW 325Ci Fluids and Chemicals

ATP – Trans Fluid Additive (Part No.AT-202)

Royal Purple – MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01301)

Valvoline – European Vehicle Full Synthetic 5W-40 Engine Oil: For Gasoline & Diesel Engines, 1 Quart (Part No.VV966)

Prestone – DOT 4 Brake Fluid: Synthetic, High Grade, 50,000 Mile, 12 fl. oz. (Part No.AS800Y)

Prestone – MAX DOT 4 Brake Fluid, 32 fl. oz., Synthetic, Highest Grade, 75,000 Mile (Part No.AS810)

Prestone – Antifreeze and Coolant: Concentrate, Universal, Protects Against Buildup And Rust, 1 Gallon (Part No.AF2000)

Prestone – Antifreeze and Coolant: 50/50 Ready To Use, Universal Platinum, 1 Gallon (Part No.AF2550)

Prestone – Power Steering Fluid: All Vehicles, Anti-Wear Protection, 50k miles, 32 oz. (Part No.AS261Y/1)

Prestone – Power Steering Fluid: All Vehicles, With Stop Leak, Restores & Conditions Seals, 50k miles, 12 oz (Part No.AS262)

Pentosin – CHF11S Hi-Perf Power Steering Fluid for European Autos – Approved for Audis (Part No.3J100337733PEN)

LIQUI MOLY – SpecialTec Long Life Full Synthetic 5W-30 Engine Oil: Offers Optimal Cleanliness, 5 Liter (Part No.2249)

Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Motor Oil (5 Quart) (Part No.11748)

Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.10107-042F)

Valvoline – Import Multi-Vehicle Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822389)

Certified A/C Pro – R-134a PAG 100 AC Oil Lubricant: With ICE 32 For Improved Cooling, 8 oz (Part No.GPM-7)

Pentosin – CHF 11S Hydraulic Fluid. Compatible with CHF 202. (Part No.1405116)

Factory Air – 8 oz. Bottle Premium PAG 46 Oil w/o Dye (Part No.59007)

Castrol – Transmax ATF Full Synthetic Multi-Vehicle Automatic Transmission Fluid (1 Quart) (Part No.152A76)

Idemitsu – Type TLS Automatic Transmission Fluid, 1 qt (Part No.30040093-75000C)

Castrol – Transmax ATF / CVT Universal Automatic Transmission Fluid, 1 Gallon (Part No.15E0C8)

ATP – Auto Trans Fluid (Part No.AT-216)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Castrol – Transmax ATF High Mileage Automatic Transmission Fluid: 1 Gallon (Part No.1599F1)

FRAM – Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 1 Quart (Part No.F420)

FRAM – Full Synthetic Global Multi-Vehicle Automatic Transmission Fluid: 1 Quart (Part No.F470)

FRAM – Dexron III / Mercon Multi-Vehicle Automatic Transmission Fluid: 5 Gallon (Part No.F420-5)

Castrol – Domestic Multi-vehicle (ATF) Automatic Transmission Fluid (1 Quart) (Part No.15ADFA)

Castrol – BP Petroleum Autran Syn 295 Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.709732)

Popular 2004 BMW 325Ci Fluids and Chemicals Categories

2004 BMW 325Ci Fluids and Chemicals

Top-Rated Fluids and Chemicals Brands For Your 2004 BMW 325Ci

Popular Castrol Fluids and Chemicals

Top-Rated Valvoline Fluids and Chemicals

FAQs for 2004 BMW 325Ci Fluids and Chemicals

What are the most purchased Fluids and Chemicals for the 2004 BMW 325Ci?

What are the top-rated 2004 BMW 325Ci Fluids and Chemicals?

More Popular Parts for All Makes