2003 Mazda B3000 Drivetrains
More 2003 Mazda B3000 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2003 Mazda B3000, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2003 Mazda B3000 Drivetrains
Yukon Gear – Ford 7.5" & 8.8" Ring Gear Bolt, Standard Open & Tracloc (Part No.33053)
from
$5.99
Ford 7.5″ & 8.8″ ring gear bolt, standard Open & TracLoc. 7/16″ x 20.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 7.5″ and 8.8″
- 7/16″ x 20
National – Multi Purpose Seal (Part No.3604)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-183)
from
$509.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Yukon Gear – 7.5" Ford Cover Gasket (Part No.23009)
Yukon Gear – Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33299)
from
$11.99
Pinion gear thrust washer (0.875″ shaft) for 8.8″ Ford.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Ford 8.8″
- 0.875″ diameter cross pin shaft applications only
Yukon Gear – Replacement Outer Slinger For Dana 28 (Part No.33016)
Yukon Gear – Yoke For Ford 8.8" Truck U/Joint Size (5" Od) (Part No.41050)
from
$221.99
Yukon yoke for Ford 8.8″ truck U/joint size (5″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- 30 spline
- Round companion flange
- 5.00″ O.D.
National – Taper Bearing Cone (Part No.LM501349)
from
$17.99
Manufactured with premium-grade steel, National® taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Trac Loc Spring For Ford 7.5" (Part No.33514)
from
$67.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 in
Product Features:
See More
Product Features:
- Trac Loc spring
- Fits Ford 7.5″
Dorman – Differential Clutch Kit (Part No.697-780)
from
$262.99
This differential disc kit is a low-cost, time-saving repair solution for the posi-traction function. They are designed to match the fit and performance of the original disc on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Direct replacement – this differential clutch kit provides the necessary components for repairing the original equipment on specific vehicles
- Quality materials – all components are built for reliable longevity and performance
- Smart solution – provides original equipment fit and function for a competitive price compared to original manufacturer
- Trustworthy quality – backed by team of designers and engineers in the United States
Yukon Gear – 18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16110)
from
$483.99
Product Features:
See More
- Clutch kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
- 18 piece kit
- Steel clutches
Richmond Gear – RngPnnInstlKt (Part No.83-1043-1)
from
$182.99
RngPnnInstlKt
Yukon Gear – Flange Yoke For Ford 7.5" Truck (5" Od) (Part No.41046)
from
$209.99
Yukon flange yoke for Ford 7.5″ truck (5″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 7.5″
- 28 spline
- Round companion flange
- 5.0″ O.D.
Yukon Gear – Mini Spool For Ford 8.8" With 28 Spline Axles (Part No.32225)
from
$218.99
Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″ with 28 spline axles
- Provides 100% traction to both wheels at all times
- Installs into standard open carrier case
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Standard Open Carrier Case & Spiders, Ford 8.8", 31 Spline (Part No.20070)
from
$404.99
Product Features:
See More
- Standard open carrier case and spiders
- Fits Ford 8.8″ with 31 spline axles
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 28 Spline (Part No.39015)
from
$209.99
Product Features:
See More
- Spider gear kit
- Fits Ford 8.8″ 28 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Dura Grip For Ford 7.5" (Part No.26034)
from
$789.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 in
Product Features:
See More
Product Features:
- Fits Ford 7.5″
- 28 spline
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Rugged Ridge – Locking Hub (Part No.15001.70)
from
$293.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Pro-King – Differential Internal Nest Kit (Part No.762B717A)
from
$99.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)
from
$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.250″ O.D.
- 1.400″ I.D.
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)
from
$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.
Product Features:
See More
Product Features:
- Side gear thrust washer for Ford 8.8″
- 0.875″ diameter cross pin shaft applications only
Dorman – Spindle Nut 1-5/8 In.-16 Hex Size 2-3/16 In. (sold by each) (Part No.615-137)
from
$22.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Cardone – Transfer Case Motor (Part No.48-202)
from
$99.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Product Features:
See More
Product Features:
- All motors are 100% torque tested to ensure strength for proper gear engagement.
- Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
- Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
- Motor magnets are 100% recharged for superior performance and reliability.
- Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
EVO Driveline – Transfer Case Motor (Part No.UMM4354)
from
$167.99
Transfer Case Motor
Popular 2003 Mazda B3000 Drivetrains Categories
2003 Mazda B3000 Drivetrains
You count on your 2003 Mazda B3000 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 243 Drivetrains ranging in price from $0.99 to $2,064.99, you’re sure to find everything you need for your 2003 Mazda B3000.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 19 different brands like Valvoline, Moog, and Driveworks. 2003 Mazda B3000 Drivetrains start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,000 extensive product reviews on 2003 Mazda B3000 Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 4.2 stars and Oil Seal with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2003 Mazda B3000 below to get started!
Top-Rated Drivetrains Brands For Your 2003 Mazda B3000
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Mazda B3000 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints. All are waiting to get your 2003 Mazda B3000 back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 2003 Mazda B3000, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2003 Mazda B3000 Drivetrains
What are the most purchased Drivetrains for the 2003 Mazda B3000?
Out of 243 Drivetrains for the 2003 Mazda B3000, the most popular in our inventory are:
What are the top-rated 2003 Mazda B3000 Drivetrains?
Top-rated Drivetrains for your 2003 Mazda B3000 based on customer reviews/ratings are:
from
$16.99
(39)
Bearings
“Perfect fit. Make sure you get your bearings completely filled with grease when reassembling your hubs.”
