2000 Mazda B3000 Drivetrains
More 2000 Mazda B3000 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 2000 Mazda B3000, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 2000 Mazda B3000 Drivetrains
National – Multi Purpose Seal (Part No.710403)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Tapered Roller Bearing (Part No.S-M-802011)
Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)
from
$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.
Product Features:
See More
Product Features:
- Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – Minor Install Kit For Ford 7.5" Differential (Part No.12033)
from
$55.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Ford 7.5″
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
National – Shaft Repair Sleeve (Part No.99155)
from
$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Chrome Cover For 7.5" Ford (Part No.32008)
National – Bearings (Part No.M802011)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Spartan – Drive Axle Assembly; Ford Ranger 99-09 Axle (Part No.RAX1931K)
from
$1599.99
Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.
Product Features:
See More
Product Features:
- Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
- Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
- Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
- Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio
Yukon Gear – Forged Yoke For Ford 8.8" With A 1350 U/Joint Size (Part No.41051)
from
$246.99
Yukon forged yoke for Ford 8.8″ with a 1350 U/joint size (stronger than billet). 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
EVO Driveline – Transfer Case Assembly (Part No.UMT427-1)
from
$1256.99
Evolution Driveline products, are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. Every transfer case we sell passes a comprehensive battery of tests on our computerized test center. We recreate actual driving conditions and analyze performance before the product even leaves the factory, so you can buy with confidence.
Product Features:
See More
Product Features:
- Back Lash, Mesh Load, Leak and Rotational Torque QC testing performed on each unit.
- OEM cores are processed as individual units throughout the tear down and assembly process
- Cores cleaned using our Hydro Blast cleaning and rinse process
- All case halves wet sanded to ensure perfect mating surfaces
- Loctite gasket eliminator and primer used to seal all aluminum mating surfaces
- Remanufactured in our ISO9001:2008 USA facility.
- Without Motor
Yukon Gear – Flange Yoke For Ford 7.5" Truck (5" Od) (Part No.41046)
from
$209.99
Yukon flange yoke for Ford 7.5″ truck (5″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 7.5″
- 28 spline
- Round companion flange
- 5.0″ O.D.
Yukon Gear – Spring Kit For Dana 28, Model 35IFS, Dana 44IFS & Dana 50IFS With Grizzly, Detroit, Tt Or Pl (Part No.33263)
from
$44.99
Product Features:
See More
- Spring kit for Dana Spicer 28, AMC Model 35 IFS, Dana Spicer 44 IFS and Dana Spicer 50 IFS
- Allows for installation of positraction or locker
Yukon Gear – Side Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33300)
from
$11.99
Side gear thrust washer (0.875″ shaft) for 8.8″ Ford.
Product Features:
See More
Product Features:
- Side gear thrust washer for Ford 8.8″
- 0.875″ diameter cross pin shaft applications only
Spicer – Axle Shft Univ Joint (Part No.5-3226X)
from
$47.99
Axle Shft Univ Joint
National – Shaft Repair Sleeve (Part No.99106)
from
$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Universal Joint (Part No.DW-369)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Yukon Gear – Model 35 Roll Pin For Cross Pin Shaft, 0.190" Diameter (Part No.33320)
from
$5.99
Model 35 roll pin for cross pin shaft, 0.190″ DIA.
Product Features:
See More
Product Features:
- Roll pin
- Fits AMC Model 35
Yukon Gear – 8.8" Ford Tracloc Clutch Set, Both Sides (Part No.16018)
from
$241.99
8.8″ Ford TracLoc (with short ears–for late models only) clutch set, both sides.
Product Features:
See More
Product Features:
- Clutch kit
- Fit Ford 8.8″ Trac Loc positraction
Yukon Gear – 7.5" Ford Cover Gasket (Part No.23009)
Pro-King – Differential Pinion Shim Kit (Part No.742G200A)
from
$18.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)
from
$134.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- Includes carrier bearings and races and “super” carrier shim kit
Yukon Gear – Dana 28 (93^) & Model 35 Outer Axle/Hub Snap Ring (Part No.33269)
from
$4.99
Dana 28 (93^) & Model 35 outer axle/hub snap ring.
Product Features:
See More
Product Features:
- Outer axle snap ring for AMC Model 35 IFS and 1993 and up Dana Spicer 28
Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)
from
$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.
Product Features:
See More
Product Features:
- 35 spline
- 8 x 3.96″ bolt pattern
- Cut to length design fits 40″-43.5″ applications
- Fits Dana Spicer 60, 70 and 80
National – Bearings (Part No.206)
from
$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Mini Spool For Ford 8.8" With 28 Spline Axles (Part No.32225)
from
$218.99
Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″ with 28 spline axles
- Provides 100% traction to both wheels at all times
- Installs into standard open carrier case
Felpro – Differential Cover Gasket (Part No.RDS 55393)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter (Part No.614-003)
from
$32.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
EMPI – RE CV Joint Boot Kit (Part No.K6010182734EMP)
from
$28.96
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Popular 2000 Mazda B3000 Drivetrains Categories
2000 Mazda B3000 Drivetrains
You count on your 2000 Mazda B3000 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 287 Drivetrains ranging in price from $0.99 to $2,064.99, you’re sure to find everything you need for your 2000 Mazda B3000.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 20 different brands like Moog, Valvoline, and Driveworks. 2000 Mazda B3000 Drivetrains start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,253 extensive product reviews on 2000 Mazda B3000 Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.4 stars and Bearings with 4.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2000 Mazda B3000 below to get started!
Top-Rated Drivetrains Brands For Your 2000 Mazda B3000
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2000 Mazda B3000 running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints. All are waiting to get your 2000 Mazda B3000 back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 2000 Mazda B3000, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 2000 Mazda B3000 Drivetrains
What are the most purchased Drivetrains for the 2000 Mazda B3000?
Out of 287 Drivetrains for the 2000 Mazda B3000, the most popular in our inventory are:
What are the top-rated 2000 Mazda B3000 Drivetrains?
Top-rated Drivetrains for your 2000 Mazda B3000 based on customer reviews/ratings are:
from
$16.99
(39)
Bearings
“Perfect fit. Make sure you get your bearings completely filled with grease when reassembling your hubs.”
