2003 GMC Yukon XL 1500 Differentials

Name: Side Differential Bearing
Brand: GM Genuine Parts
SKU: S1380
Price: 89.99 USD

Find your specific 2003 GMC Yukon XL 1500 original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 2003 GMC Yukon XL 1500 Differentials

from

$89.99

GM Genuine Parts Differential Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings are low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Low friction rotating elements that support the drive axle differential carrier within the axle or final drive housing
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$108.39

Differential Cover with Hardware Included

from

$149.99

8.6″ GM 99-08 PINION Bearing & SEAL KIT .

Product Features:

Fits 1999-2008 GM 8.6″
Uses Koyo bearings and races
Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.

from

$4.99

8.6″ GM standard Open side gear Thrust washer.

Product Features:

Side gear thrust washer
Fits GM 8.6″

from

$373.99

Product Features:

Clutch kit
Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
14 piece kit
Composite clutches

from

$175.99

Product Features:

GM 10BL 8.5 R/P 4.56A MG FRT/REAR

from

$32.99

Product Features:

Cross pin shaft
Fits GM 9.5″
Dura Grip positraction

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits M802011 race
All steel construction

from

$1.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$39.99

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:

For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.

from

$13.49

Product Features:

Brand may vary by location

from

$19.09

Differential Cover G

from

$929.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:

Fits GM 8.5″ and 8.6″ with 30 spline axles
2.73 ratio and up only
4-spring, clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$139.99

Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$359.99

Differential Pinion

from

$8.49

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$233.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$1744.99

Remanufactured Rear Axle assemblies are completely disassembled, thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed & include backing plates, axle shafts & fluid.

Product Features:

Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

from

$43.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$362.99

Eaton-type 14 plate Carbon clutch set for 9.5″ GM and 9.75″ Ford.

Product Features:

Clutch kit
Fits GM 9.5″ with Eaton positraction
Carbon fiber clutches

from

$29.99

9.5″ GM differential carrier Supershim kit.

Product Features:

Super carrier shim kit for GM 9.5″
Interlocking design makes installation much easier

from

$176.99

This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits GM 8.25″ IFS
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.

from

$298.99

Yukon 1541H alloy rear axle for GM 8.6″ (’99 -’04 w/disc brake) with a length of 33 3/4″, 6 lugs and 30 splines. for use with either 2WD or 4WD trucks. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects.

Product Features:

Fits 1999-2004 GM 8.6″ truck rear ford 2 wheel drive and 4 wheel drive
30 spline
33 3/4″ long
Disc brake applications only

from

$10.99

8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.

Product Features:

Pinion gear thrust washer for GM 8.5″ and 8.6″
Fits standard open differentials only
0.795″ I.D.

from

$279.99

8.25″ standard open carrier case 3.42 & up gear ratio. The deck height is different for 3.08 applications.

Product Features:

Standard open carrier case
Fits GM 8.25″
3.42 and up ratio only
Does not include spider gears

from

$156.99

Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$209.99

Yukon yoke for ’10 & up GM 9.5″ rear. 1415 u/joint size, strap design.

Product Features:

Fits 2010 and up GM 9.5″
30 spline
1415 U-Joint size
Outside snap ring design
4.181″ snap ring span
1.188″ cap diameter
Strap style

Popular 2003 GMC Yukon XL 1500 Differentials Categories

Differential Oil

Differential Pinion Yokes

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Front Housing Cover Gaskets

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Cover Plugs

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Spools

Differential Carrier Bearings

Differential Carrier Bearing Adjusters

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Differential Seals

Complete Differentials

Differential Drain Plugs

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Pinion Shaft Seals

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Limited Slip Differential Assemblies

Differential Spider and Pinion Gear Kits

Differential Clutch Pack Clips

Differential Lock Motors

Maybe you’re in the middle of a full rebuild of that 2003 GMC Yukon XL 1500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 293 different Differentials in our inventory ranging from $1.99 to $3,033.99. That means you can find the exact parts or products you need to keep that 2003 GMC Yukon XL 1500 running smoothly.

Differentials are only as good as their brand. We stock 20 different brands to make sure you have plenty of trusted parts to choose from for your 2003 GMC Yukon XL 1500. Valvoline, FELPRO, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2003 GMC Yukon XL 1500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,630 reviews in this category, some of the top rated parts include Differential Carrier Gear Kit with 3.9 stars and Multi Purpose Seal with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 2003 GMC Yukon XL 1500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2003 GMC Yukon XL 1500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2003 GMC Yukon XL 1500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Yukon XL 1500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Valvoline Differentials

We carry Valvoline parts in our stock across Differential Oil categories, plus more. For a 2003 GMC Yukon XL 1500, our most popular Valvoline Differentials include:

from $14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

Differential Oil

from $35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

Differential Oil

Top 2003 GMC Yukon XL 1500 Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 2003 GMC Yukon XL 1500. Popular Felpro parts include:

from $9.99

(195)

Differential Cover Gasket

Rear Differential Cover Gaskets

FAQs for 2003 GMC Yukon XL 1500 Differentials

What are the most purchased Differentials for the 2003 GMC Yukon XL 1500?

Out of 293 Differentials for the 2003 GMC Yukon XL 1500, the most popular in our inventory are:

from $51.99

(1)

Rear Differential Cover

Differential Covers

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $23.99

(7)

Bearings

Front Differential Pinion Bearings

What are the top-rated 2003 GMC Yukon XL 1500 Differentials?

Top-rated Differentials for your 2003 GMC Yukon XL 1500 based on customer reviews/ratings are:

from $231.99

(16)

Differential Carrier Gear Kit

“First set of gears were not complete. But staff reordered them, had them next day. Thanks”

from $16.99

(14)

Multi Purpose Seal

“correct part easy to install”

from $5.99

(11)

Differential Shaft Lock Bolt

“great”

2003 GMC Yukon XL 1500 Differentials

More 2003 GMC Yukon XL 1500 Differentials

Essential 2003 GMC Yukon XL 1500 Differentials

GM Genuine Parts – Side Differential Bearing (Part No.S1380)

ACDelco – Differential Cover with Hardware Included (Part No.J7019763692ACD)

USA Standard Gear – Pinion Installation Kit For ’99-’08 GM 8.6" (Part No.60014)

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

Motive Gear – Differential Ring and Pinion (Part No.GM10-456A)

Yukon Gear – Cross Pin Shaft For GM 9.5", Fits Standard & Dura Grip Or Eaton Posi Carrier (Part No.33205)

Yukon Gear – Bearing Race Driver (Part No.56020)

Pro-King – Differential Ring Gear Bolt (Part No.742G935)

Richmond Gear – Differential Gear Install Kit (Part No.83-1026-B)

Driveworks – Tapered Roller Bearing (Part No.S-HM-89249)

Mahle – Differential Cover G (Part No.J7018826576MAH)

Yukon Gear – Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles (Part No.26016)

Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)

Felpro – Differential Cover Gasket (Part No.RDS 55028-1)

Yukon Gear – Differential Pinion (Part No.13113)

Motive Gear – Pinion Nut (Part No.1260823)

Pro-King – Differential Internal Nest Kit (Part No.742G717C)

Spartan – Drive Axle Assembly; GM 03-06 RWD GT5 Axle (Part No.RAX2176C)

National – Shaft Repair Sleeve (Part No.99193)

Yukon Gear – Eaton-Type 14 Plate Carbon Clutch Set For 9.5" GM And 9.75" Ford (Part No.16058)

Yukon Gear – Super Carrier Shim Kit For GM 9.5" (Part No.55003)

USA Standard Gear – Bearing Kit For ’99-’13 GM 8.25" IFS Front (Part No.58021)

Yukon Gear – 1541H Alloy Rear Axle For GM 8.6" (’99 -’04 With Disc Brake) (Part No.21240)

Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)

Yukon Gear – Standard Open Carrier Case, GM 8.25" IFS 3.42 & Up (Part No.20086)

Dorman – Differential Pinion Yoke Assembly (Part No.697-549)

Yukon Gear – Yoke For ’10 & Up GM 9.5" Rear – 1415 U/Joint Size, Strap Design (Part No.41205)

Popular 2003 GMC Yukon XL 1500 Differentials Categories